yingweiwo

Amoxycillin arginine salt

Alias: Amoxycillin arginine salt EINECS 261-680-4 Amoxycillin L-arginine salt
Cat No.:V8077 Purity: ≥98%
Amoxicillin (Amoxycillin) arginine is an antibiotic with good oral absorption and broad spectrum (a wide range) anti-bacterial effect.
Amoxycillin arginine salt
Amoxycillin arginine salt Chemical Structure CAS No.: 59261-05-1
Product category: New1
This product is for research use only, not for human use. We do not sell to patients.
Size Price
500mg
1g
Other Sizes

Other Forms of Amoxycillin arginine salt:

  • Amoxicillin Sodium (Amoxycillin)
  • Amoxicillin (Amoxycillin and amox)
  • Amoxicillin Trihydrate (Amoxycillin)
  • Amoxycillin-d4 (Amoxycillin d4)
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Product Description
Amoxicillin (Amoxycillin) arginine is an antibiotic with good oral absorption and broad spectrum (a wide range) anti-bacterial effect. Amoxicillin arginine inhibits the biosynthesis of peptides in the cell wall, thereby inhibiting cell growth.
Amoxycillin arginine salt (CAS 59261-05-1), also known as Amoxicillin arginine or Amoxycillin L-arginine salt, is a salt form of the widely used broad-spectrum antibiotic amoxicillin complexed with the amino acid L-arginine. Amoxicillin is a penicillin-class antibiotic that inhibits bacterial cell wall synthesis by binding to penicillin-binding proteins (PBPs) and inhibiting the transpeptidase enzyme. The arginine salt form is designed to improve the oral absorption and solubility of amoxicillin. Amoxicillin arginine is used in research settings to study antibiotic efficacy, resistance mechanisms, and formulation strategies. The compound is for research use only and not for human therapeutic use.
Biological Activity I Assay Protocols (From Reference)
Targets
Penicillin-binding proteins (PBPs) in bacterial cell walls. Amoxicillin inhibits the transpeptidase enzyme involved in peptidoglycan synthesis, leading to bacterial cell lysis.
ln Vitro
In a dose-dependent manner, amoxycillin arginine (1-100 µM; 24 hours; Lactobacillus acidophilus) decreases viable cells and increases breakdown of the cell wall [1].
In vitro, Amoxicillin arginine exhibits broad-spectrum antibacterial activity against a wide range of Gram-positive and Gram-negative bacteria, including Streptococcus pneumoniae, Staphylococcus aureus (non-resistant strains), Escherichia coli, Haemophilus influenzae, and Neisseria gonorrhoeae. The minimum inhibitory concentrations (MICs) are comparable to those of amoxicillin free base. The arginine salt form may have enhanced solubility, leading to improved bioavailability. The compound inhibits cell wall biosynthesis in susceptible bacteria.
ln Vivo
At doses of 1 mg/L or less, amoxycillin (Amoxycillin) arginine (7 mg/kg; ih; female ICR/Swiss mice) reduces the number of strains and increases rat survival rates [2]. The Chlamydia trachomatis infection in mice can be resisted by amoxycillin (Amoxycillin) arginine (1.6-9.5 mg/kg; oral; once daily for 7 or 14 days; Swiss albino mice) [3].
In vivo, Amoxicillin arginine has been shown to be effective in animal models of bacterial infection, including pneumonia, septicemia, and skin infections. The compound has good oral absorption and achieves therapeutic concentrations in plasma and tissues. It is used in pharmacokinetic and pharmacodynamic studies to evaluate its efficacy against various bacterial pathogens. The arginine salt form may offer advantages in terms of solubility and absorption compared to the free base.
Enzyme Assay
The antibacterial activity of Amoxicillin arginine is assessed using the broth microdilution method according to CLSI guidelines. Bacterial cultures (e.g., S. aureus, E. coli) are grown to logarithmic phase in Mueller-Hinton broth. Serial dilutions of the compound (0.015–256 µg/mL) are added to 96-well plates, and bacteria are inoculated at a density of 5×10⁵ CFU/mL. Plates are incubated at 37°C for 16–24 hours. The minimum inhibitory concentration (MIC) is determined as the lowest concentration inhibiting visible bacterial growth.
Cell Assay
Bacterial cultures (e.g., S. aureus, E. coli) are grown to logarithmic phase and treated with Amoxicillin arginine at various concentrations (0.015–256 µg/mL) for 16–24 hours. Bacterial growth is monitored by measuring optical density at 600 nm. The MIC is determined as the lowest concentration inhibiting visible bacterial growth. Time-kill curves may be performed to assess the bactericidal activity of the compound. Cytotoxicity is assessed in mammalian cell lines (e.g., HEK293, HepG2) using MTT assay to determine CC50.
Animal Protocol
Animal/Disease Models: Female ICR/Swiss mice [2]
Doses: 7 mg/kg
Route of Administration: subcutaneous injection; every 8 hrs (hrs (hours)) for 24 hrs (hrs (hours))
Experimental Results: Inhibition of bacterial counts in a dose-dependent manner.
Animal/Disease Models: Female ICR/Swiss mice [2]
Doses: 7 mg/kg
Route of Administration: subcutaneous injection; every 8 hrs (hrs (hours)) for 4 days
Experimental Results: All animals infected with microorganisms with a MIC of 1 mg/L or less All survived, with mortality ranging from 20% to 40% in animals infected with both strains with an MIC of 2 mg/L.
Animal/Disease Models: Swiss albino mice [3]
Doses: 1.6 and 9.5 mg/kg
Route of Administration: Oral; one time/day for 7 or 14 days
Experimental Results: Improved activity in mice infected with Chlamydia trachomatis.
In murine infection models, mice are inoculated with a lethal dose of pathogenic bacteria (e.g., S. pneumoniae, E. coli) via intraperitoneal or intravenous injection. Amoxicillin arginine is administered orally or subcutaneously at doses of 5–50 mg/kg, starting 1–2 hours after infection, and continued for 3–5 days. Survival rates, bacterial load in target organs (e.g., blood, lungs, spleen), and pharmacokinetic-pharmacodynamic relationships are assessed.
References

[1]. Metabolic response of Lactobacillus acidophilus exposed to amoxicillin. J Antibiot (Tokyo). 2022 May;75(5):268-281.

[2]. In vivo activities of amoxicillin and amoxicillin-clavulanate against Streptococcus pneumoniae: application to breakpoint determinations. Antimicrob Agents Chemother. 1998 Sep;42(9):2375-9.

[3]. Activity of oral amoxicillin, ampicillin, and oxytetracycline against infection with chlamydia trachomatis in mice. J Infect Dis. 1979 Jun;139(6):717-9.

These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C22H33N7O7S
Molecular Weight
539.6
Exact Mass
539.216
CAS #
59261-05-1
Related CAS #
Amoxicillin sodium;34642-77-8;Amoxicillin;26787-78-0;Amoxicillin trihydrate;61336-70-7;Amoxicillin-d4;2673270-36-3;Amoxicillin trihydrate mixture with potassium clavulanate (4:1)
PubChem CID
216387
Appearance
Typically exists as solid at room temperature
tPSA
286
Hydrogen Bond Donor Count
8
Hydrogen Bond Acceptor Count
11
Rotatable Bond Count
9
Heavy Atom Count
37
Complexity
767
Defined Atom Stereocenter Count
3
SMILES
CC1(C(N2C(S1)C(C2=O)NC(=O)C(C3=CC=C(C=C3)O)N)C(=O)O)C.C(CC(C(=O)O)N)CN=C(N)N
InChi Key
GMJWAEBOPBLHBW-KZYOBBJWSA-N
InChi Code
InChI=1S/C16H19N3O5S.C6H14N4O2/c1-16(2)11(15(23)24)19-13(22)10(14(19)25-16)18-12(21)9(17)7-3-5-8(20)6-4-7;7-4(5(11)12)2-1-3-10-6(8)9/h3-6,9-11,14,20H,17H2,1-2H3,(H,18,21)(H,23,24);4H,1-3,7H2,(H,11,12)(H4,8,9,10)/t9?,10-,11?,14-;4-/m00/s1
Chemical Name
(2S)-2-amino-5-(diaminomethylideneamino)pentanoic acid;(5S,6S)-6-[[2-amino-2-(4-hydroxyphenyl)acetyl]amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid
Synonyms
Amoxycillin arginine salt EINECS 261-680-4 Amoxycillin L-arginine salt
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
Solubility (In Vivo)
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

Injection Formulations
(e.g. IP/IV/IM/SC)
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).
View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10: 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300:Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)


Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).
View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders


Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 1.8532 mL 9.2661 mL 18.5322 mL
5 mM 0.3706 mL 1.8532 mL 3.7064 mL
10 mM 0.1853 mL 0.9266 mL 1.8532 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration: mg/mL;

Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Contact Us