p53

Amifostine thiol concentration influences the increase in DNA binding activity. For a duration of 24 hours, cells exposed to 1 mM amifostine thiol dihydrochloride underwent p53-inducible transactivation of all p53-induced genes. Indeed, luciferase increases when this reporter gene is driven by NF-κB Expression increased 5-fold[2]. These data are normalized to the amount of co-transfected β-galactosidase gene, which results in a 3-fold increase in AP-1-driven luciferase expression.

The findings demonstrated that amifostine thiol dihydrochloride (Amifostine thiol) reduced the severity of 6-OHDA-induced catalepsy (P<0.001), which was associated with 6-OHDA damage. Additionally, it was noted that when designed with varying dosages of amifostine thiol dihydrochloride (20, 40, and 80 μg/2 μL/pattern) prior to administering 6-OHDA, the dosing pattern was affected. After three days, it recovered to the typical range of OHDA damage state and dramatically (P<0.001) boosted SOD activity compared to 6-OHDA [3].

WR1065 is an aminothiol with selective cytoprotective effects in normal cells compared with cancer cells. In a previous study (North, S., El-Ghissassi, F., Pluquet, O., Verhaegh, G., and Hainaut, P. (2000) Oncogene 19, 1206-1214), we have shown that WR1065 activates wild-type p53 in cultured cells. Here we show that WR1065 induces p53 to accumulate through escape from proteasome-dependent degradation. This accumulation is not prevented by inhibitors of phosphatidylinositol 3-kinases and is not accompanied by phosphorylation of Ser-15, -20, or -37, which are common targets of the kinases activated in response to DNA damage. Furthermore, WR1065 activates the JNK (c-Jun N-terminal kinase), decreases complex formation between p53 and inactive JNK, and phosphorylates p53 at Thr-81, a known site of phosphorylation by JNK. A dominant negative form of JNK (JNK-APF) reduces by 50% the activation of p53 by WR1065. Thus, WR1065 activates p53 through a JNK-dependent signaling pathway. This pathway may prove useful for pharmacological modulation of p53 activity through non-genotoxic mechanisms.[1]

The aminothiol WR-1065 (the active form of amifostine) protects normal tissues from the toxic effects of certain cancer drugs, while leaving their antitumor effects unchanged. The present data address the mechanism of action of this dichotomous effect. (35)S-Labeled WR-1065 bound directly to the transcription factors nuclear factor-kappaB, activator protein-1, and p53, resulting in enhanced binding of these proteins to target regulatory DNA sequences and subsequent transactivation of a number of downstream genes. Since other small molecular thiols could mimic WR-1065, the redox potential of the sulfhydryl is an important determinant of its activity. In nontransformed cells, WR-1065 protected cells from the cytotoxic effects of paclitaxel in a p53-dependent manner. However, in a transformed human tumor cell line, there was no cytoprotectivity by WR-1065, consistent with the premise that p53-dependent growth arrest is the basis for the protective effect of this compound, and that this pathway is abrogated in human tumors. The combined data support the principle that the cellular effects of the aminothiol WR-1065 are mediated through an impact on transcriptional regulation and are not only a consequence of radical scavenging.[2]

eventy two male Wistar rats were divided into 9 equal groups and 6-OHDA (8 μg/2 μl/rat) was infused unilaterally into substantia nigra pars copmacta (SNc) to induce PD. Catalepsy was measured by standard bar test, CSF level of IL-6 was assessed by enzyme-linked immunosorbent assay (ELISA) method and SOD activity measured by spectrophotometric method. In pre-treatment groups WR-1065 (20, 40 and 80 μg/2 μl/rat/day, for 3 days) was infused into the SNc before 6-OHDA administration and 21 days later, as a recovery period, behavioral and molecular assay tests were done.[3]

mouse LD50 intraperitoneal 400 mg/kg

[1]. The cytoprotective aminothiol WR1065 activates p53 through a non-genotoxic signaling pathway involving c-Jun N-terminal kinase. J Biol Chem. 2003 Apr 4;278(14):11879-87.

[2]. Binding of the aminothiol WR-1065 to transcription factors influences cellular response to anticancer drugs. J Pharmacol Exp Ther. 2001 Jun;297(3):1067-73.

[3]. Effect of WR-1065 on 6-hydroxydopamine-induced catalepsy and IL-6 level in rats. Iran J Basic Med Sci. 2016 May; 19(5): 490-496.

WR-1065 is an alkanethiol that is the N-3-aminopropyl derivative of cysteamine. Used as the S-phosphorylated prodrug, amifostine, for cytoprotection in cancer chemotherapy and radiotherapy. It has a role as a radiation protective agent, an antioxidant and a drug metabolite. It is a diamine and an alkanethiol. It is functionally related to a cysteamine.

---

2-((3-Aminopropyl)amino)ethanethiol has been reported in Apis cerana.
Radiation-Protective Agents Drugs used to protect against ionizing radiation. They are usually of interest for use in radiation therapy but have been considered for other purposes, e.g. military.

---

Neuroinflammation and oxidative stress play a key role in pathogenesis of Parkinson's disease (PD). In the present study we investigated the effect of reactive oxygen species (ROS) scavenger WR-1065 on catalepsy and cerebrospinal fluid (CSF) level of interleukin 6(IL-6) and striatum superoxide dismutase (SOD) activity in 6-hydroxydopamine (6-OHDA) induced experimental model of PD.
Materials and methods: Seventy two male Wistar rats were divided into 9 equal groups and 6-OHDA (8 μg/2 μl/rat) was infused unilaterally into substantia nigra pars copmacta (SNc) to induce PD. Catalepsy was measured by standard bar test, CSF level of IL-6 was assessed by enzyme-linked immunosorbent assay (ELISA) method and SOD activity measured by spectrophotometric method. In pre-treatment groups WR-1065 (20, 40 and 80 μg/2 μl/rat/day, for 3 days) was infused into the SNc before 6-OHDA administration and 21 days later, as a recovery period, behavioral and molecular assay tests were done.
Results: Our results showed that pre-treatment with WR-1065 improved (P<0.001) 6-OHDA-induced catalepsy in a dose dependent manner. In 6-OHDA-lesioned animals SOD activity in SNc and CSF level of IL-6 was decreased markedly (P<0.001) when compared with non-lesioned group, while pre-treatment with WR-1065(P<0.001) restored their levels up to the normal range.
Conclusion: Our study indicated that pre-treatment with WR-1065 could modulate catalepsy and IL-6 level in 6-OHDA-lesioned rats. Also WR1065 could increase SOD activity up to normal range. It can be regarded as an anti-oxidative drug in prevention or adjunctive therapy of PD.[Iran J Basic Med Sci. 2016 May;19(5):490-6.]

C5H16CL2N2S

207.16

206.041

C, 28.99; H, 7.79; Cl, 34.23; N, 13.52; S, 15.48

14653-77-1

Amifostine thiol;31098-42-7

146169

White to off-white solid powder

0.975g/cm3

218.6ºC at 760 mmHg

86ºC

0.124mmHg at 25°C

1.496

1.747

5

3

5

10

41.4

0

XDRLRDHLCIFZIW-UHFFFAOYSA-N

InChI=1S/C5H14N2S.2ClH/c6-2-1-3-7-4-5-8;;/h7-8H,1-6H2;2*1H

2-(3-aminopropylamino)ethanethiol;dihydrochloride

NSC-345308 HCl; WR-1065; NSC 345308; 14653-77-1; Amifostine Thiol Dihydrochloride; 2-(3-aminopropylamino)ethanethiol dihydrochloride; WR-1065 dihydrochloride; 2-((3-Aminopropyl)amino)ethanethiol dihydrochloride; LE9VV16SZW; Ethanethiol, 2-((3-aminopropyl)amino)-, dihydrochloride; Amifostine thiol (dihydrochloride); WR1065; NSC345308

2934.99.9001

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Note: Please store this product in a sealed and protected environment, avoid exposure to moisture.

Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

---

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

---

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

---

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

---

 (Please use freshly prepared in vivo formulations for optimal results.)