| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
| Targets |
Glucocorticoid receptor
Dexamethasone isonicotinate targets the glucocorticoid receptor (GR), a nuclear receptor that regulates gene expression. It binds GR and activates GR-mediated transcription, leading to anti-inflammatory and immunosuppressive effects. It inhibits cytokine production, reduces leukocyte infiltration, and suppresses immune responses. It is a glucocorticoid agonist. |
|---|---|
| ln Vitro |
Dexamethasone isonicotinate is an anti-inflammatory, anti-allergic glucocorticoid that can be administered orally, by inhalation, topically, and parenterally. Its unintended mineralocorticoid action may cause salt and water retention.[1]
An anti-inflammatory, anti-allergic glucocorticoid that can be administered orally, by inhalation, locally, and parenterally. It may cause water and salt retention. In vitro, dexamethasone isonicotinate binds GR with high affinity and activates GR-mediated transcription in reporter assays. It inhibits cytokine production (IL-1, TNF-α) in stimulated immune cells. It shows anti-inflammatory activity in cell-based assays. |
| ln Vivo |
In vivo, dexamethasone isonicotinate is an anti-inflammatory and anti-allergic glucocorticoid. It is used for the treatment of various inflammatory and allergic conditions. It can be administered orally, by inhalation, locally, and parenterally. It may cause water and salt retention.
|
| Enzyme Assay |
For non-cell receptor binding assays, recombinant GR ligand-binding domain is incubated with radiolabeled dexamethasone and dexamethasone isonicotinate at serial dilutions. Bound radioligand is separated by charcoal adsorption or filtration. IC50 values are calculated from competition curves.
|
| Cell Assay |
In cell assays, GR-expressing cells are transfected with a glucocorticoid-responsive luciferase reporter. Cells are treated with dexamethasone isonicotinate. Luciferase activity is measured. Cytokine production in stimulated macrophages is measured by ELISA.
|
| Animal Protocol |
In vivo animal protocols use mice or rats with inflammation models. Dexamethasone isonicotinate is administered orally, topically, or parenterally. Inflammation is assessed by measuring edema, cytokine levels, and histopathology. Pharmacokinetic parameters are determined by LC-MS.
|
| References |
[1]. https://pubchem.ncbi.nlm.nih.gov/compound/16752
|
| Additional Infomation |
Dexamethasone 21-(4-pyridinecarboxylate) is a corticosteroid. Isoniazid dexamethasone is an anti-inflammatory and anti-allergic glucocorticoid available orally, inhaled, topically, and parenterally. Its unintended mineralocorticoid effects may lead to water and sodium retention. It is an anti-inflammatory and anti-allergic glucocorticoid available orally, inhaled, topically, and parenterally. It may lead to water and sodium retention.
|
| Molecular Formula |
C28H32NO6F
|
|---|---|
| Molecular Weight |
497.55518
|
| Exact Mass |
497.221
|
| Elemental Analysis |
C, 67.59; H, 6.48; F, 3.82; N, 2.82; O, 19.29
|
| CAS # |
2265-64-7
|
| Related CAS # |
3936-02-5 (metasulfobenzoate sodium);3800-84-8 (sodium succinate);50-02-2;1177-87-3 (acetate); 150587-07-8 (beloxil); 132245-57-9 (cipecilate); 14899-36-6 (palmitate); 312-93-6 (phosphate); 2392-39-4 (sodium phosphate);
|
| PubChem CID |
16752
|
| Appearance |
Typically exists as solid at room temperature
|
| Density |
1.34 g/cm3
|
| Boiling Point |
676ºC at 760 mmHg
|
| Melting Point |
256°C
|
| Flash Point |
362.6ºC
|
| Vapour Pressure |
3.39E-19mmHg at 25°C
|
| Index of Refraction |
1.608
|
| LogP |
3.155
|
| tPSA |
113.79
|
| Hydrogen Bond Donor Count |
2
|
| Hydrogen Bond Acceptor Count |
8
|
| Rotatable Bond Count |
5
|
| Heavy Atom Count |
36
|
| Complexity |
1040
|
| Defined Atom Stereocenter Count |
8
|
| SMILES |
O=C1C=C[C@@]2([C@]3([C@@H](O)C[C@@]4([C@@]([C@@H](C[C@H]4[C@@H]3CCC2=C1)C)(O)C(COC(C1C=CN=CC=1)=O)=O)C)F)C
|
| InChi Key |
BQTXJHAJMDGOFI-NJLPOHDGSA-N
|
| InChi Code |
InChI=1S/C28H32FNO6/c1-16-12-21-20-5-4-18-13-19(31)6-9-25(18,2)27(20,29)22(32)14-26(21,3)28(16,35)23(33)15-36-24(34)17-7-10-30-11-8-17/h6-11,13,16,20-22,32,35H,4-5,12,14-15H2,1-3H3/t16-,20+,21+,22+,25+,26+,27+,28+/m1/s1
|
| Chemical Name |
[2-[(8S,9R,10S,11S,13S,14S,16R,17R)-9-fluoro-11,17-dihydroxy-10,13,16-trimethyl-3-oxo-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl]-2-oxoethyl] pyridine-4-carboxylate
|
| Synonyms |
Auxiloson; Auxilsone; Dexamethasone 21-isonicotinate; dexamethasone-21-isonicotinate; 8LGC0BOA71; Dexamethasone 21-(4-Pyridinecarboxylate); [2-[(8S,9R,10S,11S,13S,14S,16R,17R)-9-fluoro-11,17-dihydroxy-10,13,16-trimethyl-3-oxo-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl]-2-oxoethyl] pyridine-4-carboxylate; DTXSID3057690; Dexamethasone 21-isonicotinate; Dexamethasone isonicotinate; HE111; HE-111; HE 111; Voren
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400  (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 2.0098 mL | 10.0490 mL | 20.0981 mL | |
| 5 mM | 0.4020 mL | 2.0098 mL | 4.0196 mL | |
| 10 mM | 0.2010 mL | 1.0049 mL | 2.0098 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration: mg/mL;
Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.