| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
| Targets |
The primary targets of Desvenlafaxine are the serotonin transporter (SERT) and norepinephrine transporter (NET). It acts as a dual reuptake inhibitor, blocking the reuptake of serotonin and norepinephrine into presynaptic neurons. This increases the availability of these neurotransmitters in the synaptic cleft. It has no significant affinity for muscarinic, histaminergic, or adrenergic receptors.
|
|---|---|
| ln Vitro |
Desvenlafaxine is a dual SERT/NET inhibitor. It demonstrates good brain-to-plasma ratios. It is approximately 10-fold more potent at SERT than NET. Detailed IC50 values are not consistently reported but its antidepressant efficacy is well-documented.
|
| ln Vivo |
In vivo, Desvenlafaxine is approved for the treatment of major depressive disorder. It is orally active and effective at doses of 50-400 mg/day. It has a favorable safety profile compared to venlafaxine. Detailed pharmacokinetic and efficacy data are established through clinical trials.
|
| Enzyme Assay |
For non-cellular binding studies, membrane fractions from cells expressing recombinant SERT or NET are incubated with Desvenlafaxine in the presence of radiolabeled substrates. Bound radioactivity is separated by filtration and quantified. IC50 values are determined from competition curves.
|
| Cell Assay |
In vitro cell experiments employ cells expressing SERT or NET. Desvenlafaxine is added, and neurotransmitter uptake is measured using radiolabeled serotonin or norepinephrine. These protocols are for reference use only.
|
| Animal Protocol |
Animal studies employ rodent models of depression. Desvenlafaxine is administered orally, and behavioral effects are assessed using the forced swim test or tail suspension test. These protocols are for reference use only. All products are for research use only.
|
| References |
| Molecular Formula |
C16H25NO2.HCL
|
|---|---|
| Molecular Weight |
299.83614
|
| Exact Mass |
299.165
|
| CAS # |
300827-87-6
|
| Related CAS # |
Desvenlafaxine;93413-62-8;Desvenlafaxine succinate hydrate;386750-22-7;Desvenlafaxine fumarate;93414-04-1
|
| PubChem CID |
25268065
|
| Appearance |
Typically exists as solid at room temperature
|
| LogP |
3.534
|
| tPSA |
43.7
|
| Hydrogen Bond Donor Count |
3
|
| Hydrogen Bond Acceptor Count |
3
|
| Rotatable Bond Count |
4
|
| Heavy Atom Count |
20
|
| Complexity |
266
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
Cl.CN(C)CC(C1C=CC(O)=CC=1)C1(O)CCCCC1
|
| InChi Key |
IMWPSXHIEURNKZ-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C16H25NO2.ClH/c1-17(2)12-15(13-6-8-14(18)9-7-13)16(19)10-4-3-5-11-16;/h6-9,15,18-19H,3-5,10-12H2,1-2H3;1H
|
| Chemical Name |
4-[2-(dimethylamino)-1-(1-hydroxycyclohexyl)ethyl]phenol;hydrochloride
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400  (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 3.3351 mL | 16.6756 mL | 33.3511 mL | |
| 5 mM | 0.6670 mL | 3.3351 mL | 6.6702 mL | |
| 10 mM | 0.3335 mL | 1.6676 mL | 3.3351 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration: mg/mL;
Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.