IC50: 2.3 ± 0.3 μM (DNA primase); Ki: 6.1 ± 0.3 μM (DNA primase)[1]

Fludarabine triphosphate is a more powerful inhibitor of the DNA polymerase α/δ activities found in the supernatants of CCRF-CEM cells than it is of the polydeoxythymidylate primase activity[1]. The incorporation of ATP into primer RNA and dTTP into DNA is similarly inhibited by fludarabine triphosphate (10–50 μM)[1].

The effects of fludarabine triphosphate (Fara-ATP), 1-beta-D-arabinofuranosylcytosine 5'-triphosphate (ara-CTP), and aphidicolin on primer RNA and DNA synthesis in human CCRF-CEM leukemia cells were investigated. RNA-primed Okazaki fragment synthesis was monitored by first incubating whole cell lysates for 10 min in the presence or absence of the compound and then following the incorporation of [alpha-32P]ATP and [3H]dTTP into the primer RNA and DNA portions, respectively, of the Okazaki fragments. In whole cell lysates the degree of DNA synthesis inhibition induced by Fara-ATP was directly related to the extent of primer RNA synthesis inhibition over the entire range of Fara-ATP concentrations tested (10-50 microM). In contrast, primer RNA formation was stimulated by concentrations of ara-CTP (25-200 microM) and aphidicolin (0.5-5 micrograms/ml) that inhibited DNA synthesis. The primer RNA recovered from cell lysates incubated with either Fara-ATP, ara-CTP, or aphidicolin was of normal length, predominately 11 nucleotides. Fara-ATP was a more potent inhibitor of the polydeoxythymidylate primase activity than of the DNA polymerase alpha/delta activities present in the 100,000 x g supernatants of CCRF-CEM cells. Fara-ATP was a noncompetitive inhibitor of DNA primase with respect to ATP [50% inhibitory concentration, 2.3 +/- 0.3 (SD) microM, Ki = 6.1 +/- 0.3 (SE) microM] and the Km(ATP)/Ki (Fara-ATP) was 25. The 50% inhibitory concentration values of Fara-ATP for DNA polymerases alpha/delta activities on calf thymus DNA were 43 +/- 1.6 (SD) microM and greater than 100 microM with respect to dATP and dTTP. The effects of ara-CTP and aphidicolin on these enzymes were opposite those seen with Fara-ATP, since 50% inhibitory concentrations of either ara-CTP or aphidicolin for DNA polymerases alpha/delta did not inhibit polydeoxythymidylate primase activity. The results provide evidence that fludarabine phosphate blocks DNA synthesis in CCRF-CEM cells through inhibition of primer RNA formation. In contrast, the accumulation of primer RNA and RNA-primed Okazaki fragments that is induced by ara-CTP and aphidicolin could lead to the rereplication and amplification of chromosomal DNA segments[1].

---

We have previously developed a highly sensitive LC-MS method to quantitate intracellular F-ara-ATP concentrations in a leukemic cell line. However, quantitation of F-ara-ATP concentrations within CD4(+) and CD8(+) T-lymphocytes from pharmacokinetic blood samples obtained from patients receiving fludarabine therapy is not feasible because of the limited number of T-lymphocytes that can be isolated from each blood sample. Thus, we sought to determine F-ara-ATP accumulation after ex vivo exposure of freshly isolated human CD4(+) or CD8(+) T-lymphocytes to fludarabine. The method was optimized in T-lymphocytes obtained from healthy volunteers, and proved to be a feasible method to determine F-ara-ATP accumulation in patients undergoing HCT[2].

[1]. Catapano CV, et al. Inhibition of primer RNA formation in CCRF-CEM leukemia cells by fludarabine triphosphate. Cancer Res. 1991 Apr 1;51(7):1829-35.
[2]. Woodahl EL, et al. A novel phenotypic method to determine fludarabine triphosphate accumulation in T-lymphocytes from hematopoietic cell transplantation patients. Cancer Chemother Pharmacol. 2009 Feb;63(3):391-401.

Antiviral Agents: Agents used in the prophylaxis or therapy of VIRUS DISEASES. Some of the ways they may act include preventing viral replication by inhibiting viral DNA polymerase; binding to specific cell-surface receptors and inhibiting viral penetration or uncoating; inhibiting viral protein synthesis; or blocking late stages of virus assembly.

---

Results: Considerable variability was observed in F-ara-ATP accumulation in HCT patients (10.5- and 12.5-fold in CD4(+) and CD8(+) cells, respectively), compared to healthy volunteers (1.6- and 1.9-fold in CD4(+) and CD8(+) cells, respectively). Larger variability was also observed in gene expression of transporters and enzymes involved in F-ara-ATP accumulation in HCT patients; however, F-ara-ATP accumulation was not correlated with gene expression, which is in agreement with previous studies. Conclusions: The quantitation of F-ara-ATP accumulation in T-lymphocytes provides a novel tool to evaluate patient sensitivity to fludarabine. This tool can be used in future studies to evaluate whether intracellular F-ara-ATP accumulation is associated with efficacy and/or toxicity in patients receiving fludarabine.[2]

C10H15FN5O13P3

525.1715

524.986

74832-57-8

Fludarabine triphosphate trisodium;Fludarabine phosphate;75607-67-9;Fludarabine;21679-14-1

22842095

Typically exists as solid at room temperature

-5.3

7

18

8

32

836

4

C1=NC2=C(N=C(N=C2N1[C@H]3[C@H]([C@@H]([C@H](O3)COP(=O)(O)OP(=O)(O)OP(=O)(O)O)O)O)F)N

PIOKUWLZUXUBCO-FJFJXFQQSA-N

InChI=1S/C10H15FN5O13P3/c11-10-14-7(12)4-8(15-10)16(2-13-4)9-6(18)5(17)3(27-9)1-26-31(22,23)29-32(24,25)28-30(19,20)21/h2-3,5-6,9,17-18H,1H2,(H,22,23)(H,24,25)(H2,12,14,15)(H2,19,20,21)/t3-,5-,6+,9-/m1/s1

[[(2R,3S,4S,5R)-5-(6-amino-2-fluoropurin-9-yl)-3,4-dihydroxyoxolan-2-yl]methoxy-hydroxyphosphoryl] phosphono hydrogen phosphate

Fludarabine triphosphate; 2-Fluoro-araatp; F-Ara-ATP; 74832-57-8; Z2ANO885BI; 2-F-Araatp; UNII-Z2ANO885BI; 9beta-D-Arabinofuranosyl-2-fluoroadenine 5'-triphosphate;

2934.99.9001

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

---

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

---

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

---

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

---

 (Please use freshly prepared in vivo formulations for optimal results.)