yingweiwo

Thiothixene HCl

Cat No.:V44717 Purity: ≥98%
Thiothixene HCl is an antipsychotic.
Thiothixene HCl
Thiothixene HCl Chemical Structure CAS No.: 49746-04-5
Product category: New3
This product is for research use only, not for human use. We do not sell to patients.
Size Price
500mg
1g
Other Sizes

Other Forms of Thiothixene HCl:

  • (Z)-Thiothixene
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Product Description
Thiothixene HCl is an antipsychotic. Thiothixene HCl may be utilized in study/research of schizophrenia and bipolar mania.
Thiothixene HCl is the hydrochloride salt of thiothixene, a typical antipsychotic of the thioxanthene class; it is a potent dopamine D2 receptor antagonist with high selectivity over D1, D3, and D4 receptors, and is used for schizophrenia and bipolar mania, with additional binding to serotonin, histamine, adrenergic, muscarinic, and sigma receptors.
Biological Activity I Assay Protocols (From Reference)
Targets
The primary target is the dopamine D2 receptor (Ki = 0.417 nM), with 186–811-fold selectivity over D1 (Ki = 338 nM), D3 (Ki = 186.2 nM), and D4 (Ki = 363.1 nM) receptors; it also binds serotonin 5-HT, histamine H1, α1- and α2-adrenergic, muscarinic acetylcholine, and sigma receptors with Ki values of 15–5,754 nM, and dopamine, norepinephrine, and serotonin transporters with Ki values of 3.16–30 µM.
ln Vitro
Thiothixene HCl binds D2 with Ki = 0.417 nM and shows ~810-fold D2:D1 selectivity, ~130-fold higher than chlorprothixene or zuclopenthixol; it antagonizes D2-mediated cAMP inhibition and modulates the cAMP–PKA–CREB signaling pathway, and in vitro it blocks dopamine-driven signaling in striatal and mesolimbic systems at low nanomolar concentrations.
ln Vivo
In vivo, thiothixene HCl reduces spontaneous and amphetamine-induced locomotor activity in rats, enhances latent inhibition (measured by decreased lick latency in response to light and foot shock), and increases competitive behavior in submissive mice, indicating antipsychotic and antidepressant-like activity; it is effective in schizophrenia and bipolar mania models with a side-effect profile typical of typical antipsychotics.
Enzyme Assay
Dopamine D2 receptor binding is measured using membranes from cells or tissues expressing recombinant D2, D1, D3, or D4 receptors and a radioligand (e.g., [3H]spiperone or [3H]raclopride); graded thiothixene concentrations displace the radioligand, and Ki values are calculated. Selectivity is assessed against a panel of serotonin, adrenergic, histamine, muscarinic, and sigma receptors and monoamine transporters.
Cell Assay
Striatal or mesolimbic neuronal cultures or D2-expressing cell lines are treated with thiothixene HCl (0.01–10 µM); D2-mediated cAMP inhibition is measured by ELISA, PKA and CREB phosphorylation by Western blotting, and dopamine-induced locomotor or electrophysiological responses in brain slices are recorded. Cell viability is measured by metabolic assays.
Animal Protocol
Rats or mice receive thiothixene HCl by oral or intraperitoneal administration at doses selected from pharmacokinetic and behavioral studies (e.g., 0.1–10 mg/kg); spontaneous and amphetamine-induced locomotor activity is quantified by activity monitors, latent inhibition is measured by lick-suppression paradigms, competitive behavior is assessed in submissive mice, and striatal D2 occupancy is estimated by ex vivo radioligand binding or functional imaging.
Toxicity/Toxicokinetics
Effects During Pregnancy and Lactation
◉ Overview of Use During Lactation
Since there is no literature on the use of thiothoxane during lactation, it is recommended to prioritize other antipsychotic medications.
◉ Effects on Breastfed Infants
As of the revision date, no relevant published information was found.
◉ Effects on Lactation and Breast Milk
Thiothoxane can cause galactorrhea. Hyperprolactinemia appears to be the cause. Hyperprolactinemia is caused by the drug blocking dopamine in the tuberous-infundibular pathway. For mothers who have established lactation, prolactin levels may not affect their ability to breastfeed.
References

[1]. Borderline and schizotypal personality disorders treated with low-dose thiothixene vs placebo. Arch Gen Psychiatry. 1986 Jul;43(7):680-6.

Additional Infomation
Thiothioxane hydrochloride is the hydrochloride form of thiothoxane, a thioxanthate derivative and a dopamine antagonist with antipsychotic effects. Thiothioxane blocks postsynaptic dopamine receptors in the mesolimbic system and medullary chemoreceptor trigger zones, thereby reducing dopamine activity, which in turn reduces stimulation of the vomiting center and alleviates psychotic symptoms such as hallucinations and delusions. Furthermore, this drug blocks D2 cell body dendritic autoreceptors, thereby increasing dopamine metabolism. Thiothioxane has a weak affinity for histamine H1 receptors and α-adrenergic receptors.
See also: Thiothioxane (with active fraction).
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C23H31CL2N3O2S2
Molecular Weight
516.55
Exact Mass
515.123
CAS #
49746-04-5
Related CAS #
(Z)-Thiothixene;3313-26-6
PubChem CID
9958173
Appearance
Typically exists as solid at room temperature
LogP
6.031
tPSA
77.54
Hydrogen Bond Donor Count
2
Hydrogen Bond Acceptor Count
6
Rotatable Bond Count
5
Heavy Atom Count
32
Complexity
711
Defined Atom Stereocenter Count
0
SMILES
Cl.Cl.S(C1C=CC2=C(C=1)/C(/C1C=CC=CC=1S2)=C\CCN1CCN(C)CC1)(N(C)C)(=O)=O
InChi Key
SSRKPUYBAUMQED-INHJUQNSSA-N
InChi Code
InChI=1S/C23H29N3O2S2.2ClH/c1-24(2)30(27,28)18-10-11-23-21(17-18)19(20-7-4-5-9-22(20)29-23)8-6-12-26-15-13-25(3)14-16-26;;/h4-5,7-11,17H,6,12-16H2,1-3H3;2*1H/b19-8-;;
Chemical Name
(9Z)-N,N-dimethyl-9-[3-(4-methylpiperazin-1-yl)propylidene]thioxanthene-2-sulfonamide;dihydrochloride
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
Solubility (In Vivo)
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

Injection Formulations
(e.g. IP/IV/IM/SC)
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).
View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10: 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300:Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)


Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).
View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders


Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 1.9359 mL 9.6796 mL 19.3592 mL
5 mM 0.3872 mL 1.9359 mL 3.8718 mL
10 mM 0.1936 mL 0.9680 mL 1.9359 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration: mg/mL;

Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Contact Us