yingweiwo

Talmapimod HCl (SCIO-469)

Alias: SCIO469, SCIO-469, Talmapimod hydrochloride; 309915-12-6; K6T0L6I32X; Talmapimod (hydrochloride ); UNII-K6T0L6I32X; 2-[6-chloro-5-[(2R,5S)-4-[(4-fluorophenyl)methyl]-2,5-dimethylpiperazine-1-carbonyl]-1-methylindol-3-yl]-N,N-dimethyl-2-oxoacetamide;hydrochloride; 2-(6-Chloro-5-(((2R,5S)-4-(4-fluorobenzyl)-2,5-dimethylpiperazin-1-yl)carbonyl)-1-methyl-1H-indol-3-yl)-N,N-dimethyl-2-oxoacetamide hydrochloride; SCIO-469 Hydrochloride; SCI O469
Cat No.:V15706 Purity: ≥98%
Talmapimod HCl (SCIO469; SCIO-469) is a selective p38 mitogen-activated protein kinase (MAPK) inhibitor (IC50 = 9 nM) with potential immunomodulating, anti-inflammatory, and antineoplastic activities.
Talmapimod HCl (SCIO-469)
Talmapimod HCl (SCIO-469) Chemical Structure CAS No.: 309915-12-6
Product category: New1
This product is for research use only, not for human use. We do not sell to patients.
Size Price
500mg
1g
Other Sizes

Other Forms of Talmapimod HCl (SCIO-469):

  • Talmapimod (SCIO 469)
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Purity & Quality Control Documentation

Purity: ≥98%

Product Description

Talmapimod HCl (SCIO469; SCIO-469) is a selective p38 mitogen-activated protein kinase (MAPK) inhibitor (IC50 = 9 nM) with potential immunomodulating, anti-inflammatory, and antineoplastic activities. It shows about 10-fold selectivity over p38β, and at least 2000-fold selectivity over a panel of 20 other kinases, including other MAPKs. Talmapimod specifically binds to and inhibits the phosphorylation of p38 MAPK, which may result in the induction of tumor cell apoptosis, the inhibition of tumor cell proliferation, and the inhibition of tumor angiogenesis. This agent may also enhance proteasome inhibitor-induced apoptosis.

Biological Activity I Assay Protocols (From Reference)
Targets
p38α (IC50 = 9 nM); p38β (IC50 = 90 nM)
ln Vitro
In MM cells, talmapimod (SCIO-469) hydrochloride (100–200 nM; 1 hour) suppresses p38 MAPK phosphorylation[1]. In human whole blood, talmapimod hydrochloride suppresses the generation of TNF-a produced by LPS[2]. Both 5T2MM and 5T33MM cells' constitutive p38alpha MAPK phosphorylation is reduced by talmapimod hydrochloride[3]. Talmapimod (SCIO-469) inhibits p38 MAPK phosphorylation in MM cells at concentrations of 100–200 nM for an hour[1].
Talmapimod reduces the amount of TNF-a that LPS causes to be produced in human whole blood[2].
Talmapimod decreases the 5T2MM and 5T33MM cells' constitutive phosphorylation of p38alpha MAPK[3].
Although PS-341 (bortezomib) is a promising agent to improve multiple myeloma (MM) patient outcome, 65% of patients with relapsed and refractory disease do not respond. We have previously shown that heat shock protein (Hsp)27 is upregulated after PS-341 treatment, that overexpression of Hsp27 confers PS-341 resistance, and that inhibition of Hsp27 overcomes PS-341 resistance. Since Hsp27 is a downstream target of p38 mitogen-activated protein kinase (MAPK)/MAPK-mitogen-activated protein kinase-2 (MAPKAPK2), we hypothesized that inhibition of p38 MAPK activity could augment PS-341 cytotoxicity by downregulating Hsp27. Although p38 MAPK inhibitor Talmapimod/SCIO-469 alone did not induce significant growth inhibition, it blocked baseline and PS-341-triggered phosphorylation of p38 MAPK as well as upregulation of Hsp27, associated with enhanced cytotoxicity in MM.1S cells. Importantly, SCIO-469 enhanced phosphorylation of c-Jun NH2-terminal kinase (JNK) and augmented cleavage of caspase-8 and poly(ADP)-ribose polymerase. Moreover, SCIO-469 downregulated PS-341-induced increases in G2/M-phase cells, associated with downregulation of p21Cip1 expression. Importantly, SCIO-469 treatment augmented cytotoxicity of PS-341 even against PS-341-resistant cell lines and patient MM cells. These studies therefore provide the framework for clinical trials of SCIO-469 to enhance sensitivity and overcome resistance to PS-341, thereby improving patient outcome in MM. [1]
We have previously shown that p38 MAPK is overactivated in MDS hematopoietic progenitors, which led to current clinical studies of the selective p38alpha inhibitor, Talmapimod/SCIO-469, in this disease. We now demonstrate that the myelosuppressive cytokines TNFalpha and IL-1beta are secreted by bone marrow (BM) cells in a p38 MAPK-dependent manner. Their secretion is stimulated by paracrine interactions between BM stromal and mononuclear cells and cytokine induction correlates with CD34+ stem cell apoptosis in an inflammation-simulated in vitro bone marrow microenvironment. Treatment with SCIO-469 inhibits TNF secretion in primary MDS bone marrow cells and protects cytogenetically normal progenitors from apoptosis ex vivo. [2]
In this study, we determined whether Talmapimod/SCIO-469, a selective p38alpha MAPK inhibitor, inhibits multiple myeloma growth and prevents bone disease in the 5T2MM and 5T33MM models. SCIO-469 decreased constitutive p38alpha MAPK phosphorylation of both 5T2MM and 5T33MM cells in vitro. This was associated with decreased DNA synthesis and an induction of apoptosis when the cells were cultured with bone marrow stromal cells. Treatment of C57Bl/KaLwRij mice bearing 5T33MM cells with SCIO-469 inhibited p38alpha MAPK phosphorylation and was associated with a significant decrease in serum paraprotein, an almost complete reduction in tumor cells in the bone marrow, a decrease in angiogenesis, and a significant increase in disease-free survival. [3]
ln Vivo
The weight of the palpable tumors at termination was also dose-dependently decreased by talmapimod hydrochloride (10-90 mg/kg; Po; twice daily orally for 14 days)[4]. Talmapimod (SCIO-469) reduces the burden of myeloma while also preventing the emergence of myeloma bone disease[2].
Talmapimod suppresses multiple myeloma cell proliferation and guards against bone disease in the 5T2MM and 5T33MM models[3].
Talmapimod (10-90 mg/kg; p.o. ; twice daily orally for 14 days) decreased tumor weight at termination as well as tumor growth in a dose-dependent manner[4].
To assess the effect of blocking the p38α MAPK pathway in vivo on the development of multiple myeloma disease, 5T33MM injected mice were treated with Talmapimod/SCIO-469 from the time of tumor cell injection. Pharmacokinetic analysis of the serum samples of these mice resulted in values of 1 and 3 μmol/L, respectively, which were similar to the values obtained in patients. Treatment was associated with a reduction in p38α MAPK phosphorylation, as assessed on bone marrow samples of treated animals (Fig. 2). This was also associated with a decrease in serum paraprotein (8.8 ± 1.4 g/dL to 0.04 ± 0.03 g/dL with 150 mg/kg and to 0.0 ± 0.0 g/dL with 450 mg/kg; P < 0.001) and a reduction in the proportion of tumor cells in the bone marrow (67.2 ± 8.1% to 1.09 ± 0.5% for the 150 mg/kg and to 0.0 ± 0.0% for the 450 mg/kg group; P < 0.001; Table 1). Microvessel density decreased from 25.4 ± 1.2 to 19.2 ± 0.7 and 19.2 ± 0.5, respectively, for the 150 mg/kg group and the 450 mg/kg group (P < 0.001), levels similar to that of the naïve controls. This decrease could be the result of either a direct effect on angiogenesis or an indirect effect via the reduction in tumor burden. Kaplan-Meier analysis showed an increase in disease-free survival following treatment of the mice with SCIO-469 (vehicle, 27.5 days, versus SCIO-469, 96 days; P < 0.0001; Fig. 2).[3]
To address whether inhibiting the p38α MAPK pathway also affects the development of myeloma bone disease, studies were done in the 5T2MM model. Injection of 5T2MM murine myeloma cells into C57Bl/KaLwRij mice resulted in the growth of myeloma cells in the bone marrow and the development of bone disease characterized by increased osteoclast surface (P < 0.05), a reduction in cancellous bone (P < 0.01), and the presence of osteolytic bone lesions on X-ray (P < 0.01; Fig. 3). Treatment of 5T2MM-bearing mice with Talmapimod/SCIO-469 resulted in a 40% decrease in serum paraprotein (P < 0.1, for both the 150 mg/kg group and the 450 mg/kg group). Microvessel density was reduced from 25.5 ± 0.8 for the control group to 18.8 ± 0.7 for the zoledronic acid group, 20.3 ± 0.7 for the Talmapimod/SCIO-469 150 mg/kg group, and 18.7 ± 0.5 for the 450 mg/kg group (all values, P < 0.001), levels similar to that of the naïve controls. SCIO-469 treatment (both 150 and 450 mg/kg) also prevented the development of osteolytic lesions (P < 0.01; Fig. 3). This was also seen with the bisphosphonate zoledronic acid (P < 0.01), used as a positive control. Histologic analysis showed that zoledronic acid treatment significantly reduced the increase in bone surface covered by osteoclasts by 5T2MM cells (P < 0.01). This is consistent with our previous report showing that repeated dosing is effective in reducing osteoclast formation and the development of lytic bone lesions in this model (11). In contrast, SCIO-469 had no effect on osteoclast surface when compared with mice treated with vehicle. Indeed, osteoclast perimeter remained significantly increased when compared with mice treated with zoledronic acid (P < 0.05). The strong inhibition of lytic lesions yet the absence of an effect on the proportion of bone surface covered by osteoclasts is consistent with SCIO-469 inhibiting osteoclast activity and function rather than osteoclast formation. [3]
Multiple myeloma (MM) is a clonal plasma cell malignancy, which is currently incurable. Therefore, new mono- or combined therapy treatment regimens in the early and advanced phases of MM are urgently needed to combat this disease. Recently, p38 mitogen-activated protein kinase (MAPK) has been implicated as playing an important role in MM. Therefore, the effect of a p38alpha-selective MAPK inhibitor, Talmapimod/SCIO-469 (indole-5-carboxamide, ATP-competitive inhibitor), or its structural analog, SD-282 (indole-5-carboxamide, ATP-competitive inhibitor) was examined in mouse xenograft models of MM using human RPMI-8226 or H-929 plasmacytoma inocula. Oral treatment with SCIO-469 (10, 30, 90 mg/kg) twice daily was initiated in mice with palpable tumors of RPMI-8226 origin, a condition that mimics early human myeloma disease. In mice with palpable tumors, 14 days of SCIO-469 treatment significantly reduced RPMI-8226 tumor growth in a dose-dependent manner. A significant dose-dependent reduction in RPMI-8226 tumor growth was also observed when SCIO-469 oral treatment at doses of 10, 30 and 90 mg/kg twice daily was initiated in mice with tumors of pronounced size, a condition that mimics advanced human myeloma disease. In a similar set of studies employing the SCIO-469 analogue SD-282 at 90 mg/kg/bid orally, histological assessment at the end of the study demonstrated a significant reduction in RPMI-8226 tumor growth and angiogenesis. SD-282 treatment was additionally shown to significantly reduced expression of heat-shock protein-27 (HSP-27) and phospho-p38 in the tumor cells. Furthermore, co-administration of SCIO-469 with dexamethasone elicited antitumor properties in dexamethasone-sensitive H-929 tumors at much lower than the typically effective doses of dexamethasone, suggesting its potential for combined therapy. In conclusion, p38 inhibitors reduced human myeloma cell growth in vivo both at early and advanced phases of the disease. The current study also provides evidence of potential for co-therapy with dexamethasone. [4]
Enzyme Assay
MAPKAP kinase2 kinase assay [1]
MAPKAPK2 kinase assay was performed using MAPKAPK2 kinase assay kit. Briefly, MM.1S cells were pre-incubated with Talmapimod/SCIO469 for 30 min, and then treated with PS-341 for 1 h. Whole-cell lysates (1 mg) were subjected to MAPKAPK2 immunoprecipitation kinase assay, according to the manufacturer's protocol.
Cell Assay
Western Blot Analysis[1]
Cell Types: MM.1S, U266, RPMI8226, MM.1R, and RPMI-Dox40 cell lines
Tested Concentrations: 100, 200 nM
Incubation Duration: 1 hour
Experimental Results: Strongly inhibits phosphorylation of p38 MAPK. Talmapimod (SCIO-469) was pretreated with 5TMM cells (0.5 × 106/mL) in serum-free medium before being added to the lower compartment of a Transwell system. In the Transwell itself, stromal cells from synthetic bone marrow were seeded. According to the manufacturer's instructions, the 5TMM cells were taken from the lower compartment after 18 hours and stained for active caspase-3 using a FITC-labeled antibody.
BMSC cultures and ELISA [1]
BM specimens were obtained from patients with MM. Mononuclear cells (MNCs) separated by Ficoll-Hypaque density sedimentation were used to establish long-term BM cultures, as previously described (Uchiyama et al., 1993). When an adherent cell monolayer had developed, cells were harvested in Hank's buffered saline solution containing 0.25% trypsin and 0.02% EDTA, washed and collected by centrifugation. IL-6 levels in culture supernatants from BMSCs cultured for 24 h, in the presence or absence of Talmapimod/SCIO-469, were quantitated by ELISA as previously described (Hideshima et al., 2001c).
Growth inhibition assay [1]
The inhibitory effect of Talmapimod/SCIO-469 inhibitor on MM cell line growth was assessed by measuring 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrasodium bromide dye absorbance, as previously described (Hideshima et al., 2000).
Cell cycle analysis [1]
MM.1S cells were treated with either 200 nM Talmapimod or DMSO control prior to culture with 40 nM PS-341 for 12 h. Cell cycle analysis was performed, as in prior studies (Hideshima et al., 2003c, 2003d).
Immunoblotting [1]
MM.1S cells were treated with Talmapimod for 12 h prior to culture with 40 nM PS-341; cells were harvested, washed, and lysed, as in prior studies (Hideshima et al., 2000, 2001c). Cell lysates were subjected to SDS–PAGE, transferred to PVDF membrane, and immunoblotted with anti-phospho-p38 MAPK, phospho-JNK, p38 MAPK, phospho-Hsp27, Hsp27, p53, and poly ADP-ribose polymerase (PARP) Abs, as well as with anti-JNK1, hsp70, p21Cip1, p27Kip1, and actin Abs.
cDNA Microarray Analysis [2]
Details of microarray and data analysis have been described previously The data was normalized using the maNorm function in marray package of Bioconductor version 1.5.8. Differential expression values were expressed as the ratio of the median of background-subtracted fluorescence intensity of the experimental RNA to the median of background-subtracted fluorescence intensity of the control RNA. The total BMSC RNA was extracted from cells using the RNeasy kit. Arrays were probed in quadruplicate for a total of 16 hybridizations: control versus TNF□ (24 hours), TNFα̣ versus Talmapimod/SCIO-469 + TNFα (24 hours), control versus IL-1β (24 hours), IL-1β versus SCIO-469 + IL-1β (24 hours).
Fluorescent In situ hybridization [2]
Primary MDS bone marrow aspirate cells were treated in the presence and absence of Talmapimod/SCIO-469 (500uM) for 48 hours and then cytospun on slides. Fluorescence in situ hybridization analysis (FISH) was performed on methanol-acetic acid fixed interphase nuclei using the manufacturer's protocol with slight modifications. Slides were denatured in 70% formamide/2X SSC at 72°C for 5 minutes and dehydrated in a cold ethanol series. Probes against EGR1 on chromosome 5q31 locus and centromeric controls were used to detect cells with chromosome 5q deletion. Probes were mixed with appropriate volumes of buffer/distilled water and denatured at 72° C for 5 minutes. Probe mixtures were applied to denatured chromosomes and placed in a moist chamber at 37° C overnight. Post-hybridization washes for all the probes were in a 0.4X SSC/0.3% NP-40 solution at 73° C for 2 minutes, and then in 2X SSC/0.1% NP-40 solution at room temperature. Air-dried slides were then counterstained with DAPI. FISH images were captured, enhanced and stored using the computerized image analysis system.
Assessment of p38α MAPK inhibition by Western blot. [3]
5T33MM and 5T2MM cells were isolated from the tibiae of diseased mice and lysed as previously described. For assessing the effect of Talmapimod/SCIO-469 on in vitro p38α phosphorylation, 5T2MM and 5T33MM cells were preincubated with 0.5 μmol/L SCIO-469 for 1 h before being lysed. For assessing the effect of SCIO-469 on in vivo p38α phosphorylation, 5T33MM mice were treated twice a day with 90 mg/kg SCIO-469 p.o. Two hours after last treatment, bone marrow was collected for Western blotting. The cell debris was then removed by centrifugation (5 min, 13,000 × g) and sample buffer added. After boiling, the samples were separated on a 10% SDS-PAGE and transferred to a polyvinylidene difluoride membrane (Bio-Rad). The membrane was blocked with PBS containing 5% low fat milk and 0.1% Tween 20 and probed with anti–phospho-Thr180/Tyr182 p38. For measuring total protein levels, the blots were stripped and reprobed with total p38 antibody. The bands were visualized using the enhanced chemiluminescence system.
Effect of Talmapimod/SCIO-469 on thymidine incorporation. [3]
5TMM cells (1 × 106/mL) were pretreated with different concentrations of SCIO-469 in either serum-free medium or in 10% Fetal Clone I for (FCI) 1 h. The cells in serum-free medium were then incubated on irradiated (1,500 rad) syngeneic bone marrow stromal cells. Sixteen hours before harvest, cells were pulsed with 1 μCi [methyl-3H]thymidine. Cells were harvested using a cell harvester onto fiberglass filters. Filters were dried for 1 h in a 60°C oven and sealed in sample bags containing 4 mL of Optiscint Scintillation Liquid. Radioactivity was counted using a 1450 Microbeta Liquid Scintillation Counterl. Results are expressed as the relative DNA synthesis compared with untreated cells.
Effect of Talmapimod/SCIO-469 on caspase-3 activity. [3]
5TMM cells (0.5 × 106/mL) were pretreated with different concentrations of SCIO-469 in serum-free medium and then placed in the lower compartment of a Transwell system. Syngeneic bone marrow stromal cells were seeded into the Transwell itself. After 18 h, the 5TMM cells were collected from the lower compartment and stained for active caspase-3 with a FITC-labeled antibody according to manufacturer's instructions.
Animal Protocol
Animal/Disease Models: Sixweeks old male triple immune-deficient BNX mice (RPMI-8226 MM palpable tumors)[4]
Doses: 10, 30, 90 mg/kg
Route of Administration: Po; twice (two times) daily orally for 14 days
Experimental Results: Dose-dependently decreased tumor growth.
Assessment of the effects of Talmapimod/SCIO-469 on the development of myeloma disease in vivo. For studies of the effect of SCIO-469 on myeloma development, three groups of male mice (n = 12) were injected i.v. with 0.5 × 106 5T33MM cells. Mice were left untreated (naive) or, if injected with tumor cells, treated from the time of tumor cells injection with either SCIO-469 (150 or 450 mg/kg powder diet continuously available for the mice) or a vehicle (PBS) until the first mice showed signs of morbidity (at 3.7 weeks). Serum paraprotein concentration was assessed using standard electrophoretic techniques (9), bone marrow tumor burden was assessed by determining plasmacytosis on cytosmears, and bone marrow angiogenesis was assessed by determining microvessel density (see below).
To determine the effect of Talmapimod/SCIO-469 on survival, an identical experiment to that described above was done, with the exception that treatment continued until each animal showed signs of morbidity (i.e., hind limb paralysis), at which point they were sacrificed. Kaplan-Meier analysis was done to determine the effect on time to morbidity. Tumor load was confirmed on bone marrow samples.
To determine the effect of Talmapimod/SCIO-469 on the development of myeloma-bone disease, studies were done in the 5T2MM model, which develops a characteristic myeloma bone disease (8, 10, 11). Mice were divided into the following groups: group 1 (n = 10) remained without tumor cells (naïve group) and groups 2 to 4 (n = 10 each) were injected via the tail vein with 2 × 106 5T2MM cells. At the time of tumor cell injection, mice were treated with either zoledronic acid (120 μg/kg, s.c., single dose at week 7) or SCIO-469 [150 or 450 mg/kg given in the diet throughout the experimental period (11 weeks)]. At 11 weeks, all mice were sacrificed and the effects of SCIO-469 and zoledronic acid on tumor burden, development of myeloma bone disease, and angiogenesis were assessed (see below). [3]
References

[1]. p38 MAPK inhibition enhances PS-341 (bortezomib)-induced cytotoxicity against multiple myeloma cells. Oncogene. 2004 Nov 18, 23(54), 8766-76.

[2]. Inhibition of p38alpha MAPK disrupts the pathological loop of proinflammatory factor production in the myelodysplastic syndrome bone marrow microenvironment. Leuk Lymphoma. 2008 Oct;49(10):1963-75.

[3]. Inhibition of p38alpha mitogen-activated protein kinase prevents the development of osteolytic bone disease,reduces tumor burden, and increases survival in murine models of multiple myeloma. Cancer Res. 2007 May 15;67(10):4572-7.

[4]. p38alpha-selective MAP kinase inhibitor reduces tumor growth in mouse xenograft models of multiple myeloma. Anticancer Res. 2008 Nov-Dec;28(6A):3827-33.

Additional Infomation
Talmapimod is an indolecarboxamide obtained by formal condensation of the carboxy group of 6-chloro-3-[(dimethylamino)(oxo)acetyl]-1-methylindole-5-carboxylic acid with the secondary amino group of (2S,5R)-1-[(4-fluorophenyl)methyl]-2,5-dimethylpiperazine. It is a potent inhibitor of MAPK and exhibits anti-cancer properties. It has a role as an EC 2.7.11.24 (mitogen-activated protein kinase) inhibitor, an apoptosis inducer and an antineoplastic agent. It is a N-acylpiperazine, a N-alkylpiperazine, an aromatic amide, a member of monofluorobenzenes, a chloroindole, an indolecarboxamide, a dicarboxylic acid diamide and an aromatic ketone.
Talmapimod is the first-generation oral p38 MAP kinase inhibitor developed by Scios. It has shown to be effective to cure inflammatory diseases such as Rheumatoid Arthritis.
Talmapimod is an orally bioavailable, small-molecule, p38 mitogen-activated protein kinase (MAPK) inhibitor with potential immunomodulating, anti-inflammatory, and antineoplastic activities. Talmapimod specifically binds to and inhibits the phosphorylation of p38 MAPK, which may result in the induction of tumor cell apoptosis, the inhibition of tumor cell proliferation, and the inhibition of tumor angiogenesis. This agent may also enhance proteasome inhibitor-induced apoptosis. p38 MAPK is a serine/threonine protein kinase involved in a MAPK signaling cascade that controls cellular responses to various environmental stresses, cytokines, and endotoxins.
Drug Indication
Investigated for use/treatment in pain (acute or chronic) and rheumatoid arthritis.
Mechanism of Action
SCIO-469 inhibits p38 kinase, a stimulatory modulator of pro-inflammatory factors including tumor necrosis factor-alpha (TNFa), interleukin-1 (IL-1), and cyclooxygenase-2 (COX-2), all of which are known to contribute to both symptoms and disease progression in patients with Rheumatoid Arthritis (RA). Existing protein-based products that antagonize TNFa have been shown to markedly relieve the symptoms and retard the progression of RA. It also has the potential for additional benefits associated with its inhibition of IL-1 and COX-2.
We further studied whether SCIO-469 could also augment cytotoxicity of PS-341 in DHL-4 cells, which overexpress Hsp27 and are resistant to PS-341 (Chauhan et al., 2003c). Consistent with our previous studies, SCIO-469 enhanced cytotoxicity of PS-341 in DHL-4 cells, associated with inhibition of PS-341-triggered phosphorylation of Hsp27. Finally, we also examined the cytotoxicity of combined treatment with SCIO-469 and PS-341 in patient MM cells resistant to PS-341. SCIO-469 significantly augments cytotoxicity of PS-341 in these cells, and its effect on Hsp27 expression in patient cells is under investigation. Our results therefore provide the preclinical rationale for clinical trials for SCIO-469 in combination with PS-341 to either enhance the sensitivity or overcome resistance to PS-341, thereby improving patient outcome. [1]
Altogether, our results demonstrate that in addition to its direct anti-apoptotic effects on CD34+ stem cells, SCIO-469 also inhibits the expression of various proinflammatory factors in the bone marrow and disrupts the inflammatory loop that leads to the pleiotropic production of such factors. SCIO-469 is presently being used in a Phase I/II clinical trial in low grade cases of MDS. Early results have shown some efficacy in this disease. Due to the multiple cytokine pathways implicated in MDS pathogenesis, strategies to selectively inhibit individual cytokines and their receptors have not yielded much success in this disease. Our data demonstrates that p38 MAPK may represent a common signaling pathway used by multiple cytokine pathways in MDS and thus may be an attractive therapeutic target in this disease. [2]
Our results suggest that, in addition to the previous published role of SCIO-469 on suppression of soluble factors within the bone marrow microenvironment in vitro (2), SCIO-469 also reduces p38α phosphorylation in multiple myeloma cells, both in vitro and in vivo, resulting in a decreased tumor burden, angiogenesis, and bone disease, and therefore targets the multiple myeloma disease at multiple levels. This raises the possibility that targeting p38α MAPK may offer a novel therapeutic approach in the treatment of multiple myeloma. [3]
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C27H31CL2FN4O3
Molecular Weight
549.464448213577
Exact Mass
548.175
Elemental Analysis
C, 59.02; H, 5.69; Cl, 12.90; F, 3.46; N, 10.20; O, 8.74
CAS #
309915-12-6
Related CAS #
Talmapimod;309913-83-5
PubChem CID
16035045
Appearance
Typically exists as solid at room temperature
Hydrogen Bond Donor Count
1
Hydrogen Bond Acceptor Count
5
Rotatable Bond Count
5
Heavy Atom Count
37
Complexity
836
Defined Atom Stereocenter Count
2
SMILES
C[C@@H]1CN([C@H](CN1C(=O)C2=C(C=C3C(=C2)C(=CN3C)C(=O)C(=O)N(C)C)Cl)C)CC4=CC=C(C=C4)F.Cl
InChi Key
FOJUFGQLUOOBQP-MCJVGQIASA-N
InChi Code
InChI=1S/C27H30ClFN4O3.ClH/c1-16-13-33(17(2)12-32(16)14-18-6-8-19(29)9-7-18)26(35)21-10-20-22(25(34)27(36)30(3)4)15-31(5)24(20)11-23(21)28/h6-11,15-17H,12-14H2,1-5H31H/t16-,17+/m0./s1
Chemical Name
2-(6-chloro-5-((2R,5S)-4-(4-fluorobenzyl)-2,5-dimethylpiperazine-1-carbonyl)-1-methyl-1H-indol-3-yl)-N,N-dimethyl-2-oxoacetamide hydrochloride
Synonyms
SCIO469, SCIO-469, Talmapimod hydrochloride; 309915-12-6; K6T0L6I32X; Talmapimod (hydrochloride ); UNII-K6T0L6I32X; 2-[6-chloro-5-[(2R,5S)-4-[(4-fluorophenyl)methyl]-2,5-dimethylpiperazine-1-carbonyl]-1-methylindol-3-yl]-N,N-dimethyl-2-oxoacetamide;hydrochloride; 2-(6-Chloro-5-(((2R,5S)-4-(4-fluorobenzyl)-2,5-dimethylpiperazin-1-yl)carbonyl)-1-methyl-1H-indol-3-yl)-N,N-dimethyl-2-oxoacetamide hydrochloride; SCIO-469 Hydrochloride; SCI O469
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
Solubility (In Vivo)
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

Injection Formulations
(e.g. IP/IV/IM/SC)
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution 50 μL Tween 80 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO 400 μLPEG300 50 μL Tween 80 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).
View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO 100 μLPEG300 200 μL castor oil 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10: 10 : 80 (i.e. 100 μL Ethanol 100 μL Cremophor 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH 400 μLPEG300 50 μL Tween 80 450 μL Saline)


Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).
View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders


Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 1.8200 mL 9.0998 mL 18.1997 mL
5 mM 0.3640 mL 1.8200 mL 3.6399 mL
10 mM 0.1820 mL 0.9100 mL 1.8200 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration mg/mL;

Method for preparing DMSO stock solution mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Clinical Trial Information
NCT Number Recruitment interventions Conditions Sponsor/Collaborators Start Date Phases
NCT00043732 Completed Drug: SCIO-469 Rheumatoid Arthritis Scios, Inc. Phase 2
NCT00095680 Completed Drug: SCIO-469 and bortezomib
Drug: SCIO-469
Multiple Myeloma Scios, Inc. November 2004 Phase 2
NCT00087867 Completed Drug: SCIO-469 and bortezomib
Drug: SCIO-469
Multiple Myeloma Scios, Inc. June 2004 Phase 2
NCT00113893 Completed Drug: SCIO-469 Bone Marrow Diseases
Hematologic Diseases
Scios, Inc. May 2005 Phase 2
NCT00089921 Completed Drug: SCIO-469
Drug: Placebo
Arthritis, Rheumatoid Scios, Inc. July 2004 Phase 2
Contact Us