| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
| Targets |
P2Y6 Receptor (EC50 = 15 nM)
|
|---|---|
| ln Vitro |
Endosomal trafficking is intricately linked to G protein-coupled receptors (GPCR) fate and signaling. Extracellular uridine diphosphate (UDP) acts as a signaling molecule by selectively activating the GPCR P2Y6. Despite the recent interest for this receptor in pathologies, such as gastrointestinal and neurological diseases, there is sparse information on the endosomal trafficking of P2Y6 receptors in response to its endogenous agonist UDP and synthetic selective agonist 5-iodo-UDP (MRS2693). Confocal microscopy and cell surface ELISA revealed delayed internalization kinetics in response to MRS2693 vs. UDP stimulation in AD293 and HCT116 cells expressing human P2Y6. Interestingly, UDP induced clathrin-dependent P2Y6 internalization, whereas receptor stimulation by MRS2693 endocytosis appeared to be associated with a caveolin-dependent mechanism. Internalized P2Y6 was associated with Rab4, 5, and 7 positive vesicles independent of the agonist. We have measured a higher frequency of receptor expression co-occurrence with Rab11-vesicles, the trans-Golgi network, and lysosomes in response to MRS2693. Interestingly, a higher agonist concentration reversed the delayed P2Y6 internalization and recycling kinetics in the presence of MRS2693 stimulation without changing its caveolin-dependent internalization. This work showed a ligand-dependent effect affecting the P2Y6 receptor internalization and endosomal trafficking. These findings could guide the development of bias ligands that could influence P2Y6 signaling [1].
The endogenous P2Y6 receptor agonist UDP and synthetic agonist MRS2693 protected C2C12 skeletal muscle cells against apoptosis in a concentration-dependent manner (0.1−10 nM) as determined by propidium iodide staining, histochemical analysis using hematoxylin and Hoechst 33258, and DNA fragmentation. The insurmountable P2Y6 receptor antagonist MRS2578 blocked the protection. TNFα-induced apoptosis in C2C12 cells correlated with activation of the transcription factor NF-κB. The NF-κB activation was attenuated by 10 nM MRS2693, which activated the antiapoptic ERK1/2 pathway[2]. |
| ln Vivo |
In an in vivo mouse hindlimb model, MRS2693 protected against skeletal muscle ischemia/reperfusion injury. The P2Y6 receptor is a novel cytoprotective receptor that deserves further exploration in ameliorating skeletal muscle injury [2].
Cytoprotection in an in vivo model of mouse skeletal muscle ischemia/reperfusion We used a mouse hindlimb ischemia/reperfusion model to test the in vivo protective ability of the selective P2Y6 agonist MRS2693. As demonstrated in a previous study of adenosine receptor-induced protection in the same model [16], ischemia induced by an external constrictor (90 min) followed by reperfusion (24 h) resulted in significant skeletal muscle injury in PBS vehicle–treated mice. The extent of injury was quantified by an increase in the staining of the skeletal myocytes with EBD, which binds to albumin and enters only damaged cells, and by a higher level of serum creatine kinase. Administration of MRS2693 (1 mg/kg, i.p. administration) prior to ischemia and reperfusion caused a significant reduction in the extent of injury (Figure 5). The compound reduced skeletal muscle injury with a significant decrease in serum CK level (3450 U/L ± 1660 U/L, n = 10, SE, vs. vehicle-treated 12,600 U/L ± 3300 U/L, n = 14, P = 0.037). Similarly, the percent EBD-stained area was also significantly reduced by MRS2693 (10.4% ± 2.0%, SE, n = 10 vs. vehicle-treated 28.3% ± 5.6%, n = 7, P=0.0038). The myocytes stained with EBD in treated and untreated mice in sections are shown in Figure 6 [2]. |
| Cell Assay |
Induction and detection of apoptosis [2]
TNFα was used to induce apoptosis in C2C12 cells (5, 7 and 12 days old). After washing of the cells, the medium was replaced with fresh medium containing 5 μg/ml cycloheximide, which was present during the entire subsequent incubation to promote apoptosis as previously discussed. In cases of coadminstration of the P2Y6 receptor antagonist MRS2578, this was the next reagent to be added. A freshly prepared DMSO solution of MRS2578 (1 mM) was added to the incubation medium to reach a final concentration of 10 μM for an optional initial incubation of 20 min. The next reagent added to the cells was either a P2Y6 receptor agonist (MRS2693 or UDP), when present, or TNFα (10 ng/ml). When P2Y6 receptor agonists were used, TNFα was added 10 min after the agonist. The cells remained in the presence of TNFα and other agents for 4 h. The medium was then changed and the culture was left in the presence of cycloheximide for 16 h. Cell death was observed 20 h after the first exposure to TNFα. DNA fragmentation of apoptotic cells was detected using the standard Terminal Deoxynucleotidyl Transferase dUTP Nick End Labeling (TUNEL) method. Cell death or apoptosis was indicated by PI positive cells and by fluorescence of termini of DNA fragments labeled with 5-bromo-2′-deoxyuridine 5′-triphosphate (BrdUTP). The presence of live cells was detected by fluorescent labeling of DNA with the cell-permeant dye Hoechst 33258 for staining nuclear chromatin. For microscopic applications, the cells were deposited onto slides. |
| Animal Protocol |
Protocol for in vivo administration of P2Y6 receptor agonist [2]
The P2Y6 receptor agonist MRS2693 (300 μM) or vehicle alone (0.1% DMSO in PBS) was administered in a sterile 0.1-ml volume by i.p. injection 2 h before the induction of ischemia. This protocol was used in the previous study of adenosine receptor agonists and antagonists in the same model. EBD (1% wt/vol solution to yield 1 mg of EBD/10 g body weight) was also given via a separate i.p. injection 2.5 h before the induction of ischemia. |
| References |
|
| Additional Infomation |
To investigate the role of the P2Y6 receptor in skeletal muscle cell injury, we chose to use a novel and highly potent synthetic agonist, MRS2693. MRS2693 exhibits higher selectivity for this isoform because: 1) MRS2693 itself is inactive against other P2Y isoforms; and 2) its corresponding 5′-triphosphate derivative has a much weaker agonistic effect on other P2Y receptor isoforms than UTP. We have demonstrated that this derivative has cytoprotective effects on mouse skeletal muscle cells both in vitro and in vivo. Activation of the endogenous P2Y6 receptor in C2C12 cells significantly attenuated TNFα-induced apoptosis. This protective effect was observed at very low agonist concentrations and was associated with ERK1/2 activation. The novel P2Y6 receptor agonist MRS2693 exhibited potent anti-apoptotic protective activity in the C2C12 cell line in a concentration-dependent manner, ranging from 0.1 to 10 nM. Similar results were observed in astrocytoma cells, where the protective effect of the corresponding P2Y agonists was significantly dependent on the P2Y6 receptor, while this protective effect was not observed in untransfected control cells or cells expressing the P2Y4 receptor.
Members of the serine/threonine protein kinase C (PKC) family are involved in multiple cellular responses across various cell types. Each PKC isoenzyme may be involved in specific regulatory processes. Different PKC isoenzymes differ in tissue distribution, intracellular localization, and cofactor requirements, suggesting they can freely respond to different ligands for regulation and may act on different protein substrates. Our results indicate that MRS2693 activation of the P2Y6 receptor increases PKCθ expression levels, which may regulate ERK1/2 activation. The ERK1/2 pathway is one of the key pathways through which MRS2693 protects C2C12 cells from TNFα-induced cell death. Therefore, the protective mechanism of MRS2693 against skeletal muscle cells is similar to its protective mechanism against astrocytoma cells. Since there are currently no competitive antagonists for the P2Y6 receptor pharmacological probe, we used the diisothiocyanate derivative MRS2578 as a P2Y6 receptor antagonist. This antagonist blocked the protective effect of MRS2693 against C2C12 cell apoptosis. The weakened protective effect at higher agonist concentrations may be due to its interaction with other extracellular nucleotide binding sites or enzymes acting on nucleotides. TNFα-induced C2C12 cell apoptosis is associated with NF-κB activation. This is consistent with numerous previous reports indicating that TNFα can activate NF-κB in various systems. Elevated NF-κB levels have also been found to induce damage and protein degradation in cultured rat skeletal muscle cells. Interestingly, previous reports have indicated that P2Y6 receptor activation can induce NF-κB translocation to the nucleus in certain cell types, including osteoblasts. In this study, P2Y6 receptor activation alone had a minimal effect on NF-κB, but significantly reduced the sharp increase in TNFα-induced NF-κB levels. In an in vivo model of hindlimb skeletal muscle ischemia/reperfusion injury in mice, MRS2693 also exerted an effective cytoprotective effect. This model has previously been used to study the protective effects of adenosine receptor agonists. We have not yet elucidated the mechanism by which the P2Y6 receptor exerts its protective effect in vivo. In conclusion, the P2Y6 receptor is a novel cytoprotective receptor worthy of further investigation into its application in improving skeletal muscle injury. Developing more effective, selective, and stable P2Y6 receptor agonists will contribute to this research. [2] |
| Molecular Formula |
C9H22IN5O12P2
|
|---|---|
| Molecular Weight |
581.15
|
| Exact Mass |
607.881
|
| CAS # |
911391-37-2
|
| PubChem CID |
49797716
|
| Appearance |
Typically exists as solid at room temperature
|
| LogP |
1.09
|
| Hydrogen Bond Donor Count |
9
|
| Hydrogen Bond Acceptor Count |
15
|
| Rotatable Bond Count |
6
|
| Heavy Atom Count |
29
|
| Complexity |
724
|
| Defined Atom Stereocenter Count |
4
|
| SMILES |
IC1C(NC(N(C=1)C1[C@@H]([C@@H]([C@@H](COP(=O)([O-])P(=O)([O-])[O-])O1)OC)OC)=O)=O.[Na+].[Na+].[Na+]
|
| InChi Key |
RQIUJDZZLKFQQE-FCIXCQMASA-N
|
| InChi Code |
InChI=1S/C9H13IN2O12P2.3H3N/c10-3-1-12(9(16)11-7(3)15)8-6(14)5(13)4(23-8)2-22-26(20,21)24-25(17,18)19;;;/h1,4-6,8,13-14H,2H2,(H,20,21)(H,11,15,16)(H2,17,18,19);3*1H3/t4-,5-,6-,8-;;;/m1.../s1
|
| Chemical Name |
azane;[(2R,3S,4R,5R)-3,4-dihydroxy-5-(5-iodo-2,4-dioxopyrimidin-1-yl)oxolan-2-yl]methyl phosphono hydrogen phosphate
|
| Synonyms |
CHEMBL1094759; 911391-37-2; azane;[(2R,3S,4R,5R)-3,4-dihydroxy-5-(5-iodo-2,4-dioxopyrimidin-1-yl)oxolan-2-yl]methyl phosphono hydrogen phosphate
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400  (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.7207 mL | 8.6036 mL | 17.2073 mL | |
| 5 mM | 0.3441 mL | 1.7207 mL | 3.4415 mL | |
| 10 mM | 0.1721 mL | 0.8604 mL | 1.7207 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration: mg/mL;
Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.