| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
| Targets |
5-HT4 Receptor; 5-HT3 Receptor
|
|---|---|
| ln Vitro |
Identification of the human cytochrome P450 (P450) enzymes involved in the metabolism of cisapride and racemic norcisapride [(+/-)-norcisapride] was investigated at 0.1 and 1 microM, concentrations that span the mean plasma C(max) for cisapride. Formation of norcisapride (Nor), 3-fluoro-4-hydroxycisapride (3F), and 4-fluoro-2-hydroxycisapride (4F) from cisapride and an uncharacterized metabolite (UNK) from (+/-)-norcisapride in human liver microsomes (HLMs) were consistent with Michaelis-Menten kinetics for a single enzyme (K(m), 6.0, 14.3, 13.9, and 107 microM; V(max), 1350, 696, 568, and 25 pmol/mg of protein, respectively). HLMs converted cisapride to Nor at rates that were at least 3 orders of magnitude greater than those observed for (+/-)-norcisapride conversion to UNK. The sample-to-sample variation in the rates of Nor, 3F, 4F, and UNK formation correlated strongly (r(2) > 0.796) with CYP3A4/5 activity in a panel of HLMs (n = 7) and was markedly reduced by ketoconazole, a potent CYP3A inhibitor. Ketoconazole virtually eliminated (+/-)-norcisapride conversion to UNK (94 +/- 0.5%). Studies with 10 cDNA-expressed enzymes revealed that CYP3A4 catalyzed the formation of Nor and 4F at rates >100 times those of non-CYP3A enzymes and >100- and 50-fold higher than CYP3A5 and CYP3A7, respectively. CYP3A4 was the only P450 capable of UNK formation. Therefore, CYP3A4 is the principal P450 enzyme responsible for the conversion of cisapride to Nor, 3F, and 4F and of (+/-)-norcisapride to UNK. Compared with cisapride, factors related to CYP3A4-mediated (+/-)-norcisapride metabolism (e.g., ontogeny of drug-metabolizing enzymes, inhibition, and induction) should be clinically unimportant due to the apparent lack of dependence on cytochromes P450 for elimination[1].
|
| References | |
| Additional Infomation |
Drug Indication
Investigated for use/treatment in gastroesophageal reflux disease (GERD) and gastroparesis. Mechanism of Action Ticalopride is an isomer of the active metabolite of cisapride. Cisapride acts through the stimulation of the serotonin 5-HT4 receptors which increases acetylcholine release in the enteric nervous system (specifically the myenteric plexus). This results in increased tone and amplitude of gastric (especially antral) contractions, relaxation of the pyloric sphincter and the duodenal bulb, and increased peristalsis of the duodenum and jejunum resulting in accelerated gastric emptying and intestinal transit. |
| Molecular Formula |
C14H20CLN3O3
|
|---|---|
| Molecular Weight |
313.78
|
| Exact Mass |
313.119
|
| Elemental Analysis |
C, 53.59; H, 6.42; Cl, 11.30; N, 13.39; O, 15.30
|
| CAS # |
83863-69-8
|
| PubChem CID |
216236
|
| Appearance |
Typically exists as solid at room temperature
|
| Density |
1.29g/cm3
|
| Boiling Point |
461ºC at 760 mmHg
|
| Flash Point |
232.6ºC
|
| Index of Refraction |
1.583
|
| LogP |
2.338
|
| Hydrogen Bond Donor Count |
3
|
| Hydrogen Bond Acceptor Count |
5
|
| Rotatable Bond Count |
4
|
| Heavy Atom Count |
21
|
| Complexity |
358
|
| Defined Atom Stereocenter Count |
2
|
| SMILES |
CO[C@H]1CNCC[C@H]1NC(=O)C2=CC(=C(C=C2OC)N)Cl
|
| InChi Key |
OMLDMGPCWMBPAN-YPMHNXCESA-N
|
| InChi Code |
InChI=1S/C14H20ClN3O3/c1-20-12-6-10(16)9(15)5-8(12)14(19)18-11-3-4-17-7-13(11)21-2/h5-6,11,13,17H,3-4,7,16H2,1-2H3,(H,18,19)/t11-,13+/m1/s1
|
| Chemical Name |
4-amino-5-chloro-2-methoxy-N-[(3S,4R)-3-methoxypiperidin-4-yl]benzamide
|
| Synonyms |
Ticalopride; Norcisapride; 83863-69-8; 202590-69-0; (+)-Norcisapride; Ticalopride [INN]; 4-amino-5-chloro-2-methoxy-n-[(3s,4r)-3-methoxypiperidin-4-yl]benzamide; Naronapride metabolite m4;
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
Typically soluble in DMSO (e.g. 10 mM)
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 3.1869 mL | 15.9347 mL | 31.8695 mL | |
| 5 mM | 0.6374 mL | 3.1869 mL | 6.3739 mL | |
| 10 mM | 0.3187 mL | 1.5935 mL | 3.1869 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
