Peptide bond

A subset of low molecular weight proteins between 10 and 27 kD is selectively removed by thermolysin (100 μg in 1 mL, 64°C, 4 h) in isolated starch granules [2]. The bovine liver muscle plasma protein can be hydrolyzed by thermolysin[3].

---

Optimal pH: 8.0. Considerably stable from pH 5 to 9.5.
Optimal temperature : 70 °C

In SHR rats, thermolysin (50 mg/kg, orally, once) can lower systolic blood pressure[4]. Acute toxicity is not a problem with thermolysin. According to an acute toxicity assessment, the oral LD50 in mice above 24,000 mg/kg, and the oral LD50 in rats exceeds 18,000 mg/kg[5].

Starch granules from maize (Zea mays) contain a characteristic group of polypeptides that are tightly associated with the starch matrix. Zeins comprise about 50% of the granule-associated proteins, and in this study their spatial distribution within the starch granule was determined. Proteolysis of starch granules at subgelatinization temperatures using the thermophilic protease Thermolysin led to selective removal of the zeins, whereas granule-associated proteins of 32 kD or above, including the waxy protein, starch synthase I, and starch-branching enzyme IIb, remained refractory to proteolysis. Granule-associated proteins from maize are therefore composed of two distinct classes, the surface-localized zeins of 10 to 27 kD and the granule-intrinsic proteins of 32 kD or higher. The origin of surface-localized delta-zein was probed by comparing delta-zein levels of starch granules obtained from homogenized whole endosperm with granules isolated from amyloplasts. Starch granules from amyloplasts contained markedly lower levels of delta-zein relative to granules prepared from whole endosperm, thus indicating that delta-zein adheres to granule surfaces after disruption of the amyloplast envelope. Cross-linking experiments show that the zeins are deposited on the granule surface as aggregates. In contrast, the granule-intrinsic proteins are prone to covalent modification, but do not form intermolecular cross-links. We conclude that individual granule intrinsic proteins exist as monomers and are not deposited in the form of multimeric clusters within the starch matrix.[2]

---

Sarcoplasmic proteins isolated from bovine livers were hydrolyzed using the enzyme Thermolysin at 37°C for 2h. The hydrolyzates were filtered through molecular weight cut off membranes (MWCO) and filtrates were obtained. The water activity (a(w)) of unhydrolysed sarcoplasmic protein, full hydrolyzates, 10-kDa and 3-kDa filtrates were below the limit necessary for microbial growth. The antioxidant activities of both filtrates and fractions were assessed using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity assay, the ferric ion reducing antioxidant power (FRAP) assay and the Fe(2+) chelating ability assay. RP-HPLC was used for purification of the full hydrolyzates, the 10-kDa and the 3-kDa filtrates. The peptidic content of the full hydrolyzates, the 10-kDa and the 3-kDa filtrates were assessed using the Dumas method and peptide contents of each fraction were characterized using electrospray quadrupole time-of-flight (ESI-Q-TOF) mass spectrometry with the resultant spectrum analysed using the software programmes Protein Lynx Global Server 2.4. and TurboSEQUEST. Similarities between the amino acid composition of characterized peptides from each fraction and previously reported antioxidant peptides were found. This study demonstrates that meat by-product such as liver can be utilised as raw material for the generation of bioactive peptides with demonstrated antioxidant activities in vitro using the enzyme Thermolysin. It is significant as it presents a potential opportunity for meat processors to use their waste streams for the generation of bioactive peptides for potential functional food use.[3]

Animal/Disease Models: Spontaneously hypertensive rats (SHR) rats[4]
Doses: 50 mg/kg
Route of Administration: Oral administration (po), once
Experimental Results: Lowered systolic blood pressure in SHR rats, with maximal reduction by 22 mm in systolic blood pressure being observed 6 hrs (hours) after administration.

Thermolysin is a zinc metalloprotease that has potential uses in the food industry. The safety of thermolysin has not been demonstrated before, and therefore a series of standard toxicological tests to assess its potential toxicity was undertaken. The thermolysin used in this study was derived from the thermophilic bacterium Geobacillus stearothermophilus, which had undergone chemical mutagenesis to generate strains with increased thermolysin production. Acute toxicity studies in rats and mice showed that thermolysin powder is not acutely toxic with an oral LD₅₀ of more than 18,000 mg/kg (2520 mg/kg thermolysin protein) in rats and more than 24,000 mg/kg (3360 mg/kg protein) in mice. Subchronic feeding studies in rats for 91 days at doses up to 1000 mg/kg (390 mg/kg protein) revealed no significant differences between treated and non-treated groups and a No Observed Effect Level (NOEL) of 1000 mg/kg (390 mg/kg protein) per day was established. Results from genotoxicity tests such as in vitro chromosomal aberration assay and in vivo mouse micronucleus were negative. Allergenicity sequence analysis revealed no evidence suggesting that thermolysin is an allergen. The data presented in this study support the conclusion that thermolysin is safe for use in food production.[5]

[1]. Bertusvan den Burg, et al. Chapter 111 - Thermolysin and Related Bacillus Metallopeptidases.
[2]. Mu-Forster C, et al. Surface localization of zein storage proteins in starch granules from maize endosperm. Proteolytic removal by thermolysin and in vitro cross-linking of granule-associated polypeptides. Plant Physiol. 1998 Apr;116(4):1563-71.
[3]. Di Bernardini R, et al. Isolation, purification and characterization of antioxidant peptidic fractions from a bovine liver sarcoplasmic protein thermolysin hydrolyzate. Peptides. 2011 Feb;32(2):388-400.
[4]. Fujita H, et al: a prodrug-type ACE-inhibitory peptide derived from fish protein. Immunopharmacology. 1999 Oct 15;44(1-2):123-7.
[5]. Ke Q, et al. Safety evaluation of a thermolysin enzyme produced from Geobacillus stearothermophilus. Food Chem Toxicol. 2013 Sep;59:541-8.

It has been previously documented that the thermolysin-digest of "Katsuo-bushi", a Japanese traditional food processed from dried bonito possesses potent inhibitory activity against angiotensin I-converting enzyme (ACE). The present authors isolated eight kinds of ACE-inhibitory peptides from it. Of these isolated peptides, LKPNM (IC50 = 2.4 microM) was found to be hydrolyzed by ACE to produce LKP (IC50 = 0.32 microM) with 8-fold higher ACE-inhibitory activity relative to the parent peptide or LKPNM, suggesting that LKPNM can be regarded as a prodrug-type ACE-inhibitory peptide. For assessment of relative antihypertensive activities of LKPNM and LKP to that of captopril, they were orally administered to SHR rats to monitor time-course changes of blood pressures, whereby it was evidenced that both LKPNM and captopril showed maximal decrease of blood pressure 4 h after oral administration and their efficacies lasted until 6 h post-administration. In sharp contrast, however, maximal reduction of blood pressure occurred as early as 2 h after administration of LKP. Minimum effective doses of LKPNM, LKP and captopril were 8, 2.25 and 1.25 mg/kg, respectively. When compared on molar basis, antihypertensive activities of LKPNM and LKP accounted for 66% and 91% relative to that of captopril, respectively, whereas in vitro ACE-inhibitory activities of LKPNM and LKP were no more than 0.92% and 7.73% compared with that of captopril (IC50 = 0.022 microM). It is of interest to note that both of these peptides exert remarkably higher antihypertensive activities in vivo despite weaker in vitro ACE-inhibitory effects, which was ascertained by using captopril as the reference drug. [4]

CAH2ZN

107.502875804901

9073-78-3

504687751

Typically exists as White to light yellow solid at room temperature

[CaH2].[Zn]

Thermolysin; Thermophilicbacterial protease; DTXSID801054296; EINECS 232-973-4;

2934.99.9001

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

---

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

---

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

---

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

---

 (Please use freshly prepared in vivo formulations for optimal results.)