| Size | Price | |
|---|---|---|
| Other Sizes |
| Targets |
2,6-Dichloro-3-pyridinamine does not have a specific biological target itself but serves as a synthetic intermediate for the preparation of bioactive compounds. The chlorinated pyridine scaffold is found in various pharmaceuticals and agrochemicals. The compound's role is to provide the pyridine core for the synthesis of these biologically active molecules. The amino group and chlorine substituents allow for further functionalization to generate diverse derivatives with various biological activities.
|
|---|---|
| ln Vitro |
In vitro activity is not assessed for this compound itself, as it is a synthetic intermediate rather than a therapeutic agent. However, the compounds synthesized from it may exhibit various biological activities, including enzyme inhibition and receptor modulation. The chlorinated pyridine core is known to interact with various biological targets. The compound's utility lies in its ability to be converted into diverse bioactive molecules.
|
| ln Vivo |
In vivo biological activity is not applicable for this compound, as it is a chemical intermediate used in synthesis rather than a therapeutic agent. Its applications are confined to chemical synthesis and laboratory research. No in vivo efficacy or pharmacological studies in animal models are available for this intermediate. The compound is not designed for systemic administration.
|
| Enzyme Assay |
Non-cellular experiments for this compound typically involve its use as a starting material in organic synthesis. A typical protocol includes using the compound in amide bond formation, metal-catalyzed cross-coupling reactions, or nucleophilic aromatic substitution to generate pyridine derivatives. The amino group can be functionalized, and the chlorine atoms can be displaced or used in coupling reactions. The compound can be synthesized from 2,6-dichloro-3-nitropyridine by reduction with iron powder in acetic acid.
|
| Cell Assay |
Cell-based assays are not applicable for this compound, as it is a synthetic intermediate rather than a pharmacological agent. It is not tested in cell culture models for biological activity. The compound is used exclusively in chemical synthesis. Researchers should handle this compound with appropriate safety precautions.
|
| Animal Protocol |
In vivo animal studies are not performed with this compound in a therapeutic context. Its applications are confined to chemical synthesis and laboratory research. No efficacy or safety studies in animal models are available. The compound is not intended for human or veterinary use. Researchers should consult safety data sheets for handling and disposal guidelines.
|
| ADME/Pharmacokinetics |
Pharmacokinetic properties are not characterized for this compound, as it is a synthetic intermediate rather than a therapeutic agent. Its molecular weight is 163.00 g/mol, and it has a melting point of approximately 122°C. The compound is soluble in organic solvents. No data on absorption, distribution, metabolism, or excretion are available.
|
| Toxicity/Toxicokinetics |
Toxicological data for this compound are limited. Halogenated pyridines can be toxic and should be handled with appropriate safety precautions. The compound is stable under recommended storage conditions. No carcinogenic or reproductive toxicity data are available. Researchers should consult the safety data sheet for specific hazard information and handling guidelines. The compound is not intended for human use.
|
| Additional Infomation |
2,6-Dichloropyridine-3-amine is a chloropyridine.
2,6-Dichloro-3-pyridinamine is a halogenated pyridine used as an intermediate in organic synthesis. Its CAS number is 62476-56-6. The compound is used in the preparation of pharmaceuticals and agrochemicals. It is available from various suppliers. The compound is not approved for therapeutic use but is an important building block for chemical synthesis. It should be stored in a cool, dry place. |
| Molecular Formula |
C5H4CL2N2
|
|---|---|
| Molecular Weight |
163.01
|
| Exact Mass |
161.975
|
| CAS # |
62476-56-6
|
| PubChem CID |
112846
|
| Appearance |
Gray to brown solid powder
|
| Density |
1.5±0.1 g/cm3
|
| Boiling Point |
305.3±37.0 °C at 760 mmHg
|
| Melting Point |
122 °C
|
| Flash Point |
138.5±26.5 °C
|
| Vapour Pressure |
0.0±0.6 mmHg at 25°C
|
| Index of Refraction |
1.623
|
| LogP |
1.94
|
| Hydrogen Bond Donor Count |
1
|
| Hydrogen Bond Acceptor Count |
2
|
| Rotatable Bond Count |
0
|
| Heavy Atom Count |
9
|
| Complexity |
99
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
NC1=CC=C(Cl)N=C1Cl
|
| InChi Key |
MJVZSRZTBDMYLX-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C5H4Cl2N2/c6-4-2-1-3(8)5(7)9-4/h1-2H,8H2
|
| Chemical Name |
2,6-dichloropyridin-3-amine
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: This product requires protection from light (avoid light exposure) during transportation and storage. |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 6.1346 mL | 30.6730 mL | 61.3459 mL | |
| 5 mM | 1.2269 mL | 6.1346 mL | 12.2692 mL | |
| 10 mM | 0.6135 mL | 3.0673 mL | 6.1346 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
