| Size | Price | |
|---|---|---|
| Other Sizes |
| Targets |
Triethanolamine borate does not have a defined biological target as a therapeutic agent. It is a chemical compound used as a corrosion inhibitor, flame retardant, and crosslinking agent. The compound is not intended to exert pharmacological effects. Its utility lies in its chemical properties as a boron-containing compound.
|
|---|---|
| ln Vitro |
Triethanolamine borate is a biochemical reagent that can be utilized in studies pertaining to life sciences as an organic substance or biological material.
Specific in vitro activity data for Triethanolamine borate as a pharmacological agent are not documented in the literature. It is used as a research chemical and industrial reagent rather than as a drug substance. The compound is not characterized for direct biological activities such as enzyme inhibition or receptor modulation. Its effects in biological systems, if any, would be related to its potential toxicity as a boron compound. |
| ln Vivo |
Triethanolamine borate is not used for in vivo pharmacological activity assessment as a drug compound. Its primary applications are as a corrosion inhibitor, flame retardant, and crosslinking agent. The compound is not intended to be administered to animals for pharmacological studies. Its use is limited to industrial and research applications.
|
| Enzyme Assay |
Triethanolamine borate is not typically used in enzyme/receptor binding assays. Its primary applications are as a corrosion inhibitor, flame retardant, and crosslinking agent. When used in research, it may be employed in studies of boron chemistry or polymer chemistry. Standard chemical protocols are employed for its use.
|
| Cell Assay |
Triethanolamine borate is not used in cell-based assays as a test compound. Its primary applications are as a corrosion inhibitor, flame retardant, and crosslinking agent. The compound is not characterized for direct cellular effects. Its potential toxicity is a concern in laboratory settings, but it is not evaluated for pharmacological effects.
|
| Animal Protocol |
Triethanolamine borate is not used in animal studies as a pharmacological agent. Its primary applications are as a corrosion inhibitor, flame retardant, and crosslinking agent. The compound is not intended to be administered to animals for efficacy evaluations. Its use is limited to industrial and research applications.
|
| ADME/Pharmacokinetics |
Triethanolamine borate has a molecular weight of 156.98 g/mol and a molecular formula of C₆H₁₂BNO₃. It is a borate ester of triethanolamine. The compound is used as a corrosion inhibitor, flame retardant, and crosslinking agent. It is typically stored under standard laboratory conditions.
|
| Toxicity/Toxicokinetics |
Triethanolamine borate is intended for research and industrial use only and is not approved for human therapeutic applications. As a chemical compound, comprehensive toxicological data are not extensively documented in the publicly accessible literature. Standard safety precautions should be observed when handling this compound, including the use of appropriate personal protective equipment. The compound should be handled in well-ventilated areas with proper waste disposal procedures.
|
| Additional Infomation |
Triethanolamine borate (CAS#: 283-56-7) has a molecular formula of C₆H₁₂BNO₃ and a molecular weight of 156.98 g/mol. It is a borate ester of triethanolamine used as a corrosion inhibitor, flame retardant, and crosslinking agent. This compound is not a drug and has not undergone clinical trials.
|
| Molecular Formula |
C6H12BNO3
|
|---|---|
| Molecular Weight |
156.98
|
| Exact Mass |
157.091
|
| CAS # |
283-56-7
|
| PubChem CID |
84862
|
| Appearance |
White to off-white solid powder
|
| Density |
1.1±0.1 g/cm3
|
| Boiling Point |
149.6±39.0 °C at 760 mmHg
|
| Melting Point |
235-237ºC
|
| Flash Point |
44.3±27.1 °C
|
| Vapour Pressure |
4.0±0.3 mmHg at 25°C
|
| Index of Refraction |
1.466
|
| Hydrogen Bond Donor Count |
0
|
| Hydrogen Bond Acceptor Count |
4
|
| Rotatable Bond Count |
0
|
| Heavy Atom Count |
11
|
| Complexity |
111
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
O1B2OC([H])([H])C([H])([H])N(C([H])([H])C([H])([H])O2)C([H])([H])C1([H])[H]
|
| InChi Key |
NKPKVNRBHXOADG-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C6H12BNO3/c1-4-9-7-10-5-2-8(1)3-6-11-7/h1-6H2
|
| Chemical Name |
2,8,9-trioxa-5-aza-1-borabicyclo[3.3.3]undecane
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: This product requires protection from light (avoid light exposure) during transportation and storage. |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 6.3702 mL | 31.8512 mL | 63.7024 mL | |
| 5 mM | 1.2740 mL | 6.3702 mL | 12.7405 mL | |
| 10 mM | 0.6370 mL | 3.1851 mL | 6.3702 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
