| Size | Price | Stock | Qty |
|---|---|---|---|
| 100g |
|
||
| Other Sizes |
| Targets |
2-Amino-3-nitropyridine functions as a herbicide and has plant growth-promoting activity. It also functions as an intermediate in the preparation of N-(pyridinyl)benzenesulfonamides with antibacterial and antifungal activities. As a nitroaromatic compound, it belongs to the class of organic compounds known as nitroaromatic compounds.
|
|---|---|
| ln Vitro |
In vitro studies have demonstrated that 2-Amino-3-nitropyridine functions as a herbicide and has plant growth-promoting activity. It is also used as an intermediate in the preparation of compounds with antibacterial and antifungal activities.
|
| ln Vivo |
No specific in vivo pharmacological activity data have been documented for 2-Amino-3-nitropyridine as a therapeutic agent. The compound is used as a herbicide and chemical intermediate. It is not administered to animals for pharmacological evaluation. Its applications are limited to agricultural and chemical research.
|
| Enzyme Assay |
For non-cellular assays, 2-Amino-3-nitropyridine is characterized by standard analytical techniques including HPLC, NMR, and mass spectrometry to confirm identity and purity. The compound can be evaluated as a substrate in various organic reactions. Purity: ≥98.0% by nonaqueous titration. Melting point: 164.0 to 168.0°C.
|
| Cell Assay |
For in vitro cell-based studies, 2-Amino-3-nitropyridine is not typically used as a direct test compound. The compound is used as a building block for synthesizing biologically active molecules that are subsequently tested in cell-based assays. If handled in a biological laboratory context, standard safety precautions should be taken.
|
| Animal Protocol |
For in vivo animal studies, 2-Amino-3-nitropyridine can be formulated using standard injection vehicles. The compound is a solid at room temperature. Dosing solutions should be freshly prepared and administered according to specific protocols with appropriate control groups. Storage: 4°C, protect from light.
|
| ADME/Pharmacokinetics |
2-Amino-3-nitropyridine has a molecular weight of 139.11 and molecular formula C5H5N3O2. It has a melting point of 164.0 to 168.0°C. Purity: ≥98.0% by nonaqueous titration. Storage: 4°C, protect from light.
|
| Toxicity/Toxicokinetics |
2-Amino-3-nitropyridine is for research use only and not for human consumption. Standard laboratory safety practices should be followed when handling this chemical. Nitro compounds should be handled with care. Appropriate personal protective equipment including gloves and safety glasses should be worn. Specific LD50 values and detailed toxicological profiles have not been extensively reported.
|
| Additional Infomation |
2-Amino-3-nitropyridine (CAS 4214-75-9) is a herbicide with plant growth-promoting activity. It is used as an intermediate in the preparation of antibacterial and antifungal compounds. No clinical trials or therapeutic approvals exist.
|
| Molecular Formula |
C5H5N3O2
|
|---|---|
| Molecular Weight |
139.11
|
| Exact Mass |
139.038
|
| CAS # |
4214-75-9
|
| PubChem CID |
77887
|
| Appearance |
Light yellow to green yellow solid powder
|
| Density |
1.4±0.1 g/cm3
|
| Boiling Point |
299.1±20.0 °C at 760 mmHg
|
| Melting Point |
163-165 °C(lit.)
|
| Flash Point |
134.7±21.8 °C
|
| Vapour Pressure |
0.0±0.6 mmHg at 25°C
|
| Index of Refraction |
1.646
|
| LogP |
1.62
|
| Hydrogen Bond Donor Count |
1
|
| Hydrogen Bond Acceptor Count |
4
|
| Rotatable Bond Count |
0
|
| Heavy Atom Count |
10
|
| Complexity |
133
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
C1=C(C(=NC=C1)N)[N+](=O)[O-]
|
| InChi Key |
BPYHGTCRXDWOIQ-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C5H5N3O2/c6-5-4(8(9)10)2-1-3-7-5/h1-3H,(H2,6,7)
|
| Chemical Name |
3-nitropyridin-2-amine
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: This product requires protection from light (avoid light exposure) during transportation and storage. |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 7.1886 mL | 35.9428 mL | 71.8856 mL | |
| 5 mM | 1.4377 mL | 7.1886 mL | 14.3771 mL | |
| 10 mM | 0.7189 mL | 3.5943 mL | 7.1886 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
