| Size | Price | Stock | Qty |
|---|---|---|---|
| 10g |
|
||
| 25g |
|
||
| 50g |
|
||
| Other Sizes |
| Targets |
2-Aminoethan-1-ol hydrochloride does not have a defined pharmacological target as it is a chemical intermediate and biochemical reagent. The compound is used as feedstock in the production of emulsifiers, detergents, and pharmaceuticals. Its primary applications are in industrial chemical synthesis rather than as a therapeutic agent. The compound serves as a building block for various chemical transformations.
|
|---|---|
| ln Vitro |
2-Aminoethan-1-ol hydrochloride is a biochemical reagent that can be utilized in research pertaining to life sciences as an organic compound or biological material.
No specific in vitro pharmacological activity data are available for 2-Aminoethan-1-ol hydrochloride as a drug candidate. In research settings, the compound is used as a biochemical reagent and chemical intermediate. Its activity is assessed in terms of chemical reactivity and synthetic utility rather than direct biological activity. The compound is used in the production of various pharmaceuticals. |
| ln Vivo |
No specific in vivo pharmacological activity data have been documented for 2-Aminoethan-1-ol hydrochloride as a therapeutic agent. The compound is used as a chemical intermediate and biochemical reagent. It is not administered to animals for pharmacological evaluation. Its applications are limited to chemical synthesis and industrial production.
|
| Enzyme Assay |
For non-cellular assays, 2-Aminoethan-1-ol hydrochloride is characterized by standard analytical techniques including NMR, HPLC, and mass spectrometry to confirm identity and purity. Purity is typically ≥95-98%. The compound has a molecular weight of 97.54 and formula C₂H₈ClNO. Storage: room temperature in a cool and dry place. The compound is a solid at room temperature. Solubility: soluble in water and aqueous buffers.
|
| Cell Assay |
For in vitro cell-based studies, 2-Aminoethan-1-ol hydrochloride is not typically used as a direct test compound. It is a biochemical reagent and chemical intermediate. If handled in a biological laboratory context, standard safety precautions should be taken. The compound should be stored in a cool, dry place protected from light and moisture.
|
| Animal Protocol |
For in vivo animal studies, 2-Aminoethan-1-ol hydrochloride is not typically administered as a test compound. It is used as a chemical intermediate and biochemical reagent. If used in toxicological studies, it would be administered via appropriate routes with suitable formulations. Standard animal welfare guidelines should be followed for all in vivo studies.
|
| ADME/Pharmacokinetics |
2-Aminoethan-1-ol hydrochloride has a molecular weight of 97.54 and formula C₂H₈ClNO. Purity: typically ≥95-98%. Storage: room temperature in a cool and dry place. The compound is a solid at room temperature. Solubility: soluble in water and aqueous buffers. The compound is stable under recommended storage conditions.
|
| Toxicity/Toxicokinetics |
Toxicity Summary
The CIR panel concluded that ethanolamine and its 12 related ethanolamine salts are safe for use at the methods and concentrations described in the current safety assessment (rinse-off products only) when the formulation is non-irritating. The panel cautioned that these ingredients should not be used in cosmetics that may generate N-nitroso compounds… Ethanolamine hydrochloride… Safe for use in cosmetics under specific conditions. 2-Aminoethan-1-ol hydrochloride is for research use only and not for human consumption. Standard laboratory safety practices should be followed when handling this chemical. Appropriate personal protective equipment including gloves and safety glasses should be worn. Specific LD₅₀ values and detailed toxicological profiles have not been extensively reported. The compound should be stored in a sealed container away from moisture. |
| Additional Infomation |
See also: Monoethanolamine (note moved to).
2-Aminoethan-1-ol hydrochloride (CAS 2002-24-6) is also known as ethanolamine hydrochloride and monoethanolamine hydrochloride. It is used as feedstock in the production of emulsifiers, detergents, and pharmaceuticals. The compound is a biochemical reagent for life science research. No clinical trials or therapeutic approvals exist for this compound. |
| Molecular Formula |
C2H8CLNO
|
|---|---|
| Molecular Weight |
97.54
|
| Exact Mass |
97.029
|
| CAS # |
2002-24-6
|
| Related CAS # |
2-Aminoethan-1-ol-13C2 hydrochloride;1173019-25-4;2-Aminoethan-1-ol-d4 hydrochloride;2483832-03-5
|
| PubChem CID |
74819
|
| Appearance |
White to off-white solid powder
|
| Boiling Point |
170.9ºC at 760 mmHg
|
| Melting Point |
82-84 °C(lit.)
|
| Flash Point |
93.3ºC
|
| Vapour Pressure |
0.458mmHg at 25°C
|
| LogP |
0.439
|
| Hydrogen Bond Donor Count |
3
|
| Hydrogen Bond Acceptor Count |
2
|
| Rotatable Bond Count |
1
|
| Heavy Atom Count |
5
|
| Complexity |
10
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
C(CO)N.Cl
|
| InChi Key |
PMUNIMVZCACZBB-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C2H7NO.ClH/c3-1-2-4;/h4H,1-3H2;1H
|
| Chemical Name |
2-aminoethanol;hydrochloride
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment, avoid exposure to moisture. |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 10.2522 mL | 51.2610 mL | 102.5220 mL | |
| 5 mM | 2.0504 mL | 10.2522 mL | 20.5044 mL | |
| 10 mM | 1.0252 mL | 5.1261 mL | 10.2522 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
