| Size | Price | |
|---|---|---|
| Other Sizes |
| Targets |
5-Bromoquinoline does not have a defined pharmacological target as it is a synthetic intermediate and building block. The compound is a versatile building block in organic synthesis due to the presence of the bromine atom on the quinoline ring, which allows for further functionalization via cross-coupling reactions. It is commonly utilized in the synthesis of various pharmaceutical compounds and agrochemicals. Its primary function is to enable the construction of complex organic molecules.
|
|---|---|
| ln Vitro |
No specific in vitro pharmacological activity data are available for 5-Bromoquinoline as it is a synthetic intermediate. In research settings, the compound is used as a building block for synthesizing libraries of quinoline-based compounds that are subsequently screened for biological activity. Its activity is assessed in terms of synthetic utility and reactivity rather than direct biological activity. The compound is a versatile building block in organic synthesis.
|
| ln Vivo |
No specific in vivo pharmacological activity data have been documented for 5-Bromoquinoline as a therapeutic agent. The compound is used in chemical synthesis and is not administered directly to animals. Its derivatives and the compounds synthesized from it may be evaluated in animal models depending on the therapeutic area. The compound is handled in chemistry laboratories for organic synthesis applications.
|
| Enzyme Assay |
For non-cellular assays, 5-Bromoquinoline is characterized by standard analytical techniques including GC, HPLC, NMR, and mass spectrometry to confirm identity and purity. Purity is ≥98.0% by GC and ≥98.0% by nonaqueous titration. The compound has a molecular weight of 208.05 and molecular formula C₉H₆BrN. Melting point: 44.0 to 48.0°C. Storage: room temperature in a cool and dark place. Typical protocols involve using the compound in cross-coupling reactions.
|
| Cell Assay |
For in vitro cell-based studies, 5-Bromoquinoline is not typically used as a direct test compound. It is a building block for synthesizing biologically active molecules that are subsequently tested in cell-based assays. If handled in a biological laboratory context, standard safety precautions should be taken. The compound should be stored in a cool, dry place protected from light and moisture.
|
| Animal Protocol |
For in vivo animal studies, 5-Bromoquinoline can be formulated using standard injection vehicles. The compound is a solid at room temperature. Dosing solutions should be freshly prepared and administered according to specific protocols with appropriate control groups. Standard handling procedures for brominated quinolines should be followed.
|
| ADME/Pharmacokinetics |
5-Bromoquinoline has a molecular weight of 208.05 and molecular formula C₉H₆BrN. It appears as a white to light yellow to green powder to crystal with a melting point of 44.0 to 48.0°C. Purity: ≥98.0% by GC and ≥98.0% by nonaqueous titration. Storage: room temperature in a cool and dark place. Solubility: moderate solubility in organic solvents such as ethanol and dichloromethane, less soluble in water.
|
| Toxicity/Toxicokinetics |
5-Bromoquinoline is for research use only and not for human consumption. Standard laboratory safety practices should be followed when handling this chemical. The compound is irritating to eyes, respiratory system, and skin. Appropriate personal protective equipment including gloves and safety glasses should be worn. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
| Additional Infomation |
5-Bromoquinoline (CAS 4964-71-0) is also known as 5-bromo-quinoline. It is a versatile building block in organic synthesis due to the presence of the bromine atom on the quinoline ring, which allows for further functionalization via cross-coupling reactions. The compound is commonly utilized in the synthesis of various pharmaceutical compounds and agrochemicals. No clinical trials or therapeutic approvals exist.
|
| Molecular Formula |
C9H6BRN
|
|---|---|
| Molecular Weight |
208.06
|
| Exact Mass |
206.968
|
| CAS # |
4964-71-0
|
| PubChem CID |
817321
|
| Appearance |
Typically exists as solid at room temperature
|
| Density |
1.6±0.1 g/cm3
|
| Boiling Point |
295.9±13.0 °C at 760 mmHg
|
| Melting Point |
50-52°C
|
| Flash Point |
132.8±19.8 °C
|
| Vapour Pressure |
0.0±0.6 mmHg at 25°C
|
| Index of Refraction |
1.674
|
| LogP |
3.06
|
| Hydrogen Bond Donor Count |
0
|
| Hydrogen Bond Acceptor Count |
1
|
| Rotatable Bond Count |
0
|
| Heavy Atom Count |
11
|
| Complexity |
138
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
C1=CC=C(C2=CC=CN=C12)Br
|
| InChi Key |
CHODTZCXWXCALP-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C9H6BrN/c10-8-4-1-5-9-7(8)3-2-6-11-9/h1-6H
|
| Chemical Name |
5-bromoquinoline
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 4.8063 mL | 24.0315 mL | 48.0631 mL | |
| 5 mM | 0.9613 mL | 4.8063 mL | 9.6126 mL | |
| 10 mM | 0.4806 mL | 2.4032 mL | 4.8063 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
