| Size | Price | Stock | Qty |
|---|---|---|---|
| 5mg |
|
||
| 10mg |
|
||
| Other Sizes |
| Targets |
1-Methylimidazole-d6 does not have a specific biological target. It is a deuterium-labeled compound used as a research chemical and as an internal standard for analytical chemistry. Its primary function is as a tool for studying heterocyclic compounds in research applications. The compound is not intended to interact with biological targets.
|
|---|---|
| ln Vitro |
Drug compounds have included stable heavy isotopes of carbon, hydrogen, and other elements, mostly as quantitative tracers while the drugs were being developed. Because deuteration may have an effect on a drug's pharmacokinetics and metabolic properties, it is a cause for concern [1].
1-Methylimidazole-d6 is not evaluated for traditional in vitro biological activity. Its "activity" is as a chemical reagent and as an internal standard for analytical chemistry. It is used to provide accurate and precise quantification of related compounds in various analytical applications. No pharmacological in vitro activity is associated with this compound. |
| ln Vivo |
No in vivo activity is applicable for 1-Methylimidazole-d6, as it is not a therapeutic agent. Its use is confined to the laboratory for analytical chemistry and research applications. The compound is not administered to living organisms for any biological effect.
|
| Enzyme Assay |
1-Methylimidazole-d6 is used as an internal standard in analytical chemistry. Its performance is assessed by its isotopic purity and its ability to provide accurate and precise quantification of related compounds. The compound is typically analyzed by GC-MS or LC-MS. Its purity is a critical parameter for its use as an analytical standard.
|
| Cell Assay |
1-Methylimidazole-d6 is not used in standard cell culture for pharmacological studies. It is a chemical reagent used in analytical chemistry and research applications. Its isotopic labeling allows for precise measurement and tracking in various analytical applications. The compound itself is not added to cell culture media.
|
| Animal Protocol |
Animal studies are not conducted with 1-Methylimidazole-d6 as an active compound. It is used as an analytical standard in research involving animal samples. The compound is never administered to animals for therapeutic or investigative purposes.
|
| ADME/Pharmacokinetics |
1-Methylimidazole-d6 has a molecular weight of 88.14 g/mol and a molecular formula of C4D6N2. It is a deuterium-labeled analogue of 1-methylimidazole. The compound is typically stored at -20°C for long-term stability. It is soluble in organic solvents. It is also known as 1-(methyl-d3)-1H-imidazole-2,4,5-d3.
|
| Toxicity/Toxicokinetics |
Toxicological data for 1-Methylimidazole-d6 are not extensively detailed, as it is a research compound. It is not intended for human or veterinary use. Standard laboratory safety precautions, including the use of personal protective equipment (PPE), should be followed when handling the compound.
|
| References | |
| Additional Infomation |
1-Methylimidazole-d6 is a deuterium-labeled analogue of 1-methylimidazole, a heterocyclic compound with a five-membered ring containing nitrogen. 1-Methylimidazole is a heterocyclic moiety commonly found in small-molecule inhibitors. The deuterated version is used as a stable isotope-labeled compound for research applications. It is not approved for therapeutic use.
|
| Molecular Formula |
C4D6N2
|
|---|---|
| Molecular Weight |
88.14
|
| Exact Mass |
82.053
|
| CAS # |
285978-27-0
|
| PubChem CID |
11343986
|
| Appearance |
Colorless to light yellow liquid
|
| Density |
1.0±0.1 g/cm3
|
| Boiling Point |
198.7±9.0 °C at 760 mmHg
|
| Flash Point |
92.2±0.0 °C
|
| Vapour Pressure |
0.5±0.4 mmHg at 25°C
|
| Index of Refraction |
1.525
|
| LogP |
-0.21
|
| Hydrogen Bond Donor Count |
0
|
| Hydrogen Bond Acceptor Count |
1
|
| Rotatable Bond Count |
0
|
| Heavy Atom Count |
6
|
| Complexity |
44.8
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
CN1C=CN=C1
|
| InChi Key |
MCTWTZJPVLRJOU-RLTMCGQMSA-N
|
| InChi Code |
InChI=1S/C4H6N2/c1-6-3-2-5-4-6/h2-4H,1H3/i1D3,2D,3D,4D
|
| Chemical Name |
2,4,5-trideuterio-1-(trideuteriomethyl)imidazole
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 11.3456 mL | 56.7279 mL | 113.4559 mL | |
| 5 mM | 2.2691 mL | 11.3456 mL | 22.6912 mL | |
| 10 mM | 1.1346 mL | 5.6728 mL | 11.3456 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
