Pentapeptide

Polymer-peptide conjugates are a promising class of compounds, where polymers can be used to overcome some of the limitations associated with peptides intended for therapeutic and/or diagnostic applications. Linear polymers such as poly(ethylene glycol) can be conjugated through terminal moieties and have therefore limited loading capacities. In this research, functionalised linear poly(ethylene glycol)s are utilised for peptide conjugation, to increase their potential loading capacities. These poly(ethylene glycol) derivatives are conjugated to peptide sequences containing representative side-chain functionalised amino acids, using different conjugation chemistries, including copper-catalysed azide-alkyne cycloaddition, amide coupling and thiol-ene reactions. Conjugation of a sequence containing the RGD motif to poly(allyl glycidyl ether) by the thiol-ene reaction, provided a conjugate which could be used in platelet adhesion studies [1].

---

Novel nanoscale theragnostic devices were successfully prepared through attachment of well defined, multifunctional polymer chains to gadolinium (Gd) metal-organic framework (MOF) nanoparticles. Copolymers of poly(N-isopropylacrylamide)-co-poly(N-acryloxysuccinimide)-co-poly(fluorescein O-methacrylate) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The succinimide functionality was utilized as a scaffold for attachment of both a therapeutic agent, such as methotrexate, and a targeting ligand, such as H-glycine-arginine-glycine-aspartate-serine-NH(2) peptide. Employment of a trithiocarbonate RAFT agent allowed for reduction of the polymer end groups to thiolates providing a means of copolymer attachment through vacant orbitals on the Gd(3+) ions at the surface of the Gd MOF nanoparticles. These versatile, nanoscale scaffolds were shown to be biocompatible and have cancer cell targeting, bimodal imaging, and disease treatment capabilities. This unique method provided a simple yet versatile route of producing polymer-nanoparticle theragnostic materials with an unprecedented degree of flexibility in the construct, potentially allowing for tunable loading capacities and spatial loading of targeting/treatment agents, while incorporating bimodal imaging capabilities through both magnetic resonance and fluorescence microscopy [2].

[1]. Poly(Ethylene glycol)-based backbones with high peptide loading capacities. Molecules. 2014 Oct 30;19(11):17559-77.
[2]. Polymer-modified gadolinium metal-organic framework nanoparticles used as multifunctional nanomedicines for the targeted imaging and treatment of cancer. Biomacromolecules. 2009 Apr 13;10(4):983-93.

C17H31N9O8

489.48

603.222

143648-02-6

145707822

H-Gly-Arg-Gly-Asp-Ser-NH2; H-Gly-Arg-Gly-Asp-Ser-NH2; glycyl-L-arginyl-glycyl-L-alpha-aspartyl-L-serinamide

GRGDS; GRGDS-NH2

Typically exists as solid at room temperature

11

15

16

41

868

3

C(C[C@@H](C(=O)NCC(=O)N[C@@H](CC(=O)O)C(=O)N[C@@H](CO)C(=O)N)NC(=O)CN)CN=C(N)N.C(=O)(C(F)(F)F)O

PEYYWZCVLFVHNW-PUBMXKGKSA-N

InChI=1S/C17H31N9O8.C2HF3O2/c18-5-11(28)24-8(2-1-3-22-17(20)21)15(33)23-6-12(29)25-9(4-13(30)31)16(34)26-10(7-27)14(19)32;3-2(4,5)1(6)7/h8-10,27H,1-7,18H2,(H2,19,32)(H,23,33)(H,24,28)(H,25,29)(H,26,34)(H,30,31)(H4,20,21,22);(H,6,7)/t8-,9-,10-;/m0./s1

(3S)-3-[[2-[[(2S)-2-[(2-aminoacetyl)amino]-5-(diaminomethylideneamino)pentanoyl]amino]acetyl]amino]-4-[[(2S)-1-amino-3-hydroxy-1-oxopropan-2-yl]amino]-4-oxobutanoic acid;2,2,2-trifluoroacetic acid

143648-02-6; H-Gly-Arg-Gly-Asp-Ser-NH2 Trifluoroacetate; (3S)-3-[[2-[[(2S)-2-[(2-aminoacetyl)amino]-5-(diaminomethylideneamino)pentanoyl]amino]acetyl]amino]-4-[[(2S)-1-amino-3-hydroxy-1-oxopropan-2-yl]amino]-4-oxobutanoic acid;2,2,2-trifluoroacetic acid; H-Gly-Arg-Gly-Asp-Ser-NH2 trifluoroacetate salt

2934.99.9001

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

---

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

---

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

---

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

---

 (Please use freshly prepared in vivo formulations for optimal results.)