yingweiwo

Altenuene (Altenuene)

Cat No.:V56853 Purity: ≥98%
Altenuene is a heptenone extracted from the endogenous fungus Nigrospora sphaerica.
Altenuene (Altenuene)
Altenuene (Altenuene) Chemical Structure CAS No.: 29752-43-0
Product category: Microorganisms
This product is for research use only, not for human use. We do not sell to patients.
Size Price Stock Qty
1mg
Other Sizes

Other Forms of Altenuene (Altenuene):

  • (-)-Altenuene
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Product Description
Altenuene is a heptenone extracted from the endogenous fungus Nigrospora sphaerica.
Altenuene (CAS#: 29752-43-0) is a heptaketide mycotoxin and bioactive secondary metabolite produced predominantly by fungi of the genus Alternaria. It is also isolated from endolichenic fungal strains such as Nigrospora sphaerica. Altenuene has the molecular formula C15H16O6 and a molecular weight of 292.28. It is classified as a benzochromenone derivative and is commonly found as a contaminant in grains, oilseeds, fruits, and vegetables infested by Alternaria species.
Biological Activity I Assay Protocols (From Reference)
Targets
Altenuene does not have a well-defined molecular target. It exhibits antioxidant activity and inhibits cholinesterases. It has also demonstrated moderate activity against Staphylococcus aureus. As a mycotoxin, it may exert toxic effects through multiple mechanisms, including oxidative stress induction, enzyme inhibition, and disruption of cellular signaling pathways. The compound's primary pharmacological interest lies in its potential as a lead compound for antimicrobial or antioxidant drug development.
ln Vitro
In vitro, altenuene demonstrates moderate antibacterial activity against Staphylococcus aureus. It also exhibits antioxidant activity and inhibits cholinesterases. Altenuene has been evaluated in various cell lines including lung cancer A549, breast cancer MDA-MB-231, and pancreatic cancer PANC-1, although specific IC50 values are not readily available. The compound's bioactivity is attributed to its phenolic and chromenone structural features, which are characteristic of many bioactive natural products.
ln Vivo
In vivo activity of altenuene has not been extensively reported. As a mycotoxin, its primary relevance is in food safety and toxicology, rather than therapeutic applications. Contamination of food and feed with Alternaria toxins, including altenuene, is a concern for human and animal health. No significant in vivo pharmacological activity has been reported in the literature, and the compound is not used as a therapeutic agent.
Enzyme Assay
In vitro enzyme assays for altenuene typically involve measuring its antioxidant activity and cholinesterase inhibition. For antioxidant activity, the DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging assay is commonly used, where the compound is incubated with DPPH and the decrease in absorbance is measured. For cholinesterase inhibition, the Ellman's assay is employed, where the compound is incubated with acetylcholinesterase or butyrylcholinesterase and the substrate acetylthiocholine, and the production of thiocholine is monitored colorimetrically.
Cell Assay
In vitro cell-based assays for altenuene involve culturing cancer cell lines such as A549 (lung), MDA-MB-231 (breast), or PANC-1 (pancreatic) and treating them with various concentrations of the compound. Cells are seeded in multi-well plates, allowed to adhere, and then treated with altenuene for 24-72 hours. Cell viability is assessed using MTT, CellTiter-Glo, or SRB assays. IC50 values for cytotoxicity are calculated from dose-response curves. Antibacterial activity is assessed using broth microdilution assays to determine minimum inhibitory concentrations (MICs).
Animal Protocol
In vivo animal studies for altenuene are primarily conducted in the context of toxicology and food safety rather than therapeutic efficacy. Rodent models may be used to assess the acute and chronic toxicity of Alternaria toxins, including altenuene. Animals are administered the compound orally or intraperitoneally at various doses, and clinical signs, body weight, food consumption, clinical pathology, and histopathology are evaluated. No specific therapeutic efficacy studies have been reported.
ADME/Pharmacokinetics
The pharmacokinetic properties of altenuene have not been extensively characterized. As a small molecule (molecular weight 292.28) with multiple hydroxyl groups, it is expected to have moderate aqueous solubility and may undergo rapid metabolism and excretion. Mycotoxins are typically metabolized in the liver by cytochrome P450 enzymes and excreted in urine and feces. The compound's bioavailability would depend on its stability in the gastrointestinal tract and first-pass metabolism. No specific PK data are available.
Toxicity/Toxicokinetics
The toxicity profile of altenuene is primarily associated with its role as a mycotoxin. Alternaria toxins, including altenuene, are contaminants of food and feed and pose health risks to humans and animals. Toxicological studies have focused on the compound's potential to cause genotoxicity, cytotoxicity, and immunotoxicity. The compound exhibits moderate activity against Staphylococcus aureus, indicating some antimicrobial potential, but also suggesting potential for cytotoxicity. Standard toxicology assessments would include acute, sub-chronic, and chronic toxicity studies in rodents.
References

[1]. Heptaketides with antiviral activity from three endolichenic fungal strains Nigrospora sp., Alternaria sp. and Phialophora sp. Fitoterapia. 2012 Sep;83(6):1087-91.

Additional Infomation
Altenuene has been reported to be found in Urspora rice, Altenuene alternata, and other organisms with available data.
Altenuene is a mycotoxin and research compound, not approved for clinical use. It is a heptaketide isolated from Alternaria fungi and endolichenic strains such as Nigrospora sphaerica. The compound has the molecular formula C15H16O6 and a molecular weight of 292.28. It exhibits antioxidant activity, cholinesterase inhibition, and moderate antibacterial activity against Staphylococcus aureus. Altenuene is primarily of interest in the context of food safety, toxicology, and natural product chemistry.
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C15H16O6
Molecular Weight
292.28
Exact Mass
292.095
CAS #
29752-43-0
Related CAS #
(-)-Altenuene;889101-41-1
PubChem CID
34687
Appearance
White to off-white solid powder
Vapour Pressure
1.05E-15mmHg at 25°C
Source
Originated from microorganisms: Alternaria alternata
LogP
0.838
tPSA
96.22
Hydrogen Bond Donor Count
3
Hydrogen Bond Acceptor Count
6
Rotatable Bond Count
1
Heavy Atom Count
21
Complexity
475
Defined Atom Stereocenter Count
3
SMILES
C[C@]12C[C@@H]([C@H](C=C1C3=C(C(=CC(=C3)OC)O)C(=O)O2)O)O
InChi Key
MMHTXEATDNFMMY-WBIUFABUSA-N
InChi Code
InChI=1S/C15H16O6/c1-15-6-12(18)10(16)5-9(15)8-3-7(20-2)4-11(17)13(8)14(19)21-15/h3-5,10,12,16-18H,6H2,1-2H3/t10-,12-,15-/m0/s1
Chemical Name
(2S,3S,4aS)-2,3,7-trihydroxy-9-methoxy-4a-methyl-3,4-dihydro-2H-benzo[c]chromen-6-one
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Note: This product requires protection from light (avoid light exposure) during transportation and storage.
Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
DMSO: ~100 mg/mL (~342.1 mM; with ultrasonication)
Solubility (In Vivo)
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

Injection Formulations
(e.g. IP/IV/IM/SC)
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).
View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10: 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300:Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)


Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).
View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders


Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 3.4214 mL 17.1069 mL 34.2138 mL
5 mM 0.6843 mL 3.4214 mL 6.8428 mL
10 mM 0.3421 mL 1.7107 mL 3.4214 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration: mg/mL;

Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Contact Us