| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
PEN-221 (PEN221) is a novel and potent Somatostatin receptor 2 (SSTR2)-targeting conjugate consisting of microtubule-targeting agent DM1 linked to the C-terminal side chain of Tyr3-octreotate. As a peptide-drug conjugate (PDC), PEN-221 demonstrates in vitro activity which is both potent (IC50 = 10 nM) and receptor-dependent (IC50 shifts 90-fold upon receptor blockade). PEN-221 targets high levels of DM1 to SSTR2-expressing xenograft tumors, which has led to tumor regressions in several SSTR2-expressing xenograft mouse models. The safety and efficacy of PEN-221 is currently under evaluation in human clinical trials. PEN-221 is a miniature drug conjugate consisting of a peptide ligand, that is highly selective in targeting SSTR2, joined through a cleavable linker to the potent cytotoxic payload DM1. SSTR2 is overexpressed on the cell surface of a range of solid tumors including neuroendocrine tumors and small cell lung cancers. In non-clinical experiments, PEN-221 binds with high affinity and selectivity to SSTR2. On binding, PEN-221 triggers SSTR2 internalization resulting in the accumulation of the DM1 payload in tumor cells followed by cell cycle arrest and apoptosis.
| References | |
|---|---|
| Additional Infomation |
Nendratareotide uzatansine is a peptide-drug conjugate composed of a somatostatin peptide analog and the cytotoxic metansine. Nendratareotide uzatansine is a miniaturized drug conjugate consisting of a somatostatin peptide analog targeting somatostatin receptor 2 (SSTR2) and conjugated to the microtubule-binding cytotoxic metansine compound DM1 (metansine) via a cleavable linker, exhibiting potential antitumor activity. Upon administration, the peptide ligand portion of Nendratareotide uzatansine targets and binds to SSTR2 overexpressed in certain tumor cell types. This binding stimulates SSTR2-mediated drug endocytosis; after endocytosis, the DM1 portion is released and binds to tubulin, thereby disrupting microtubule assembly/depolymerization dynamics. This inhibits both cell division and the proliferation of SSTR2-expressing cancer cells. Compared to antibody-drug conjugates (ADCs), miniaturized drug conjugates are smaller in size and more easily penetrate and distribute within dense tumor tissue.
|
| Exact Mass |
1784.651
|
|---|---|
| CAS # |
1853254-97-3
|
| Related CAS # |
1853254-98-4 (diacetate);2250036-35-0 (acetate);1853254-97-3;
|
| PubChem CID |
118634103
|
| Appearance |
Typically exists as solid at room temperature
|
| LogP |
3.7
|
| Hydrogen Bond Donor Count |
15
|
| Hydrogen Bond Acceptor Count |
26
|
| Rotatable Bond Count |
28
|
| Heavy Atom Count |
122
|
| Complexity |
3650
|
| Defined Atom Stereocenter Count |
17
|
| SMILES |
ClC1C(=CC2CC(C)=CC=C[C@H]([C@]3(C[C@@H]([C@@H](C)[C@H]4[C@](C)([C@H](CC(N(C)C=1C=2)=O)OC([C@H](C)N(C(CCSSC[C@@H](C(N)=O)NC([C@@H]1CSSC[C@@H](C(N[C@@H](CC2C=CC(=CC=2)O)C(N[C@@H](C(N[C@@H](CCCCN)C(N[C@@H]([C@@H](C)O)C(N1)=O)=O)=O)CC1=CNC2C=CC=CC1=2)=O)=O)NC([C@@H](CC1C=CC=CC=1)N)=O)=O)=O)C)=O)O4)OC(N3)=O)O)OC)OC |c:7,9|
|
| InChi Key |
JVPMJFUBODFGNB-UFDFPQQFSA-N
|
| InChi Code |
InChI=1S/C83H109ClN14O20S4/c1-44-18-17-24-65(115-9)83(113)39-64(116-81(112)96-83)45(2)71-82(5,118-71)66(38-68(102)98(7)62-35-50(32-44)36-63(114-8)69(62)84)117-80(111)46(3)97(6)67(101)29-31-119-120-41-59(72(87)103)92-78(109)61-43-122-121-42-60(93-73(104)54(86)33-48-19-11-10-12-20-48)77(108)90-57(34-49-25-27-52(100)28-26-49)75(106)91-58(37-51-40-88-55-22-14-13-21-53(51)55)76(107)89-56(23-15-16-30-85)74(105)95-70(47(4)99)79(110)94-61/h10-14,17-22,24-28,35-36,40,45-47,54,56-61,64-66,70-71,88,99-100,113H,15-16,23,29-34,37-39,41-43,85-86H2,1-9H3,(H2,87,103)(H,89,107)(H,90,108)(H,91,106)(H,92,109)(H,93,104)(H,94,110)(H,95,105)(H,96,112)/b24-17+,44-18+/t45-,46+,47-,54-,56+,57+,58-,59+,60+,61+,64+,65-,66+,70+,71+,82+,83+/m1/s1
|
| Chemical Name |
[(1S,2R,3S,5S,6S,16E,18E,20R,21S)-11-chloro-21-hydroxy-12,20-dimethoxy-2,5,9,16-tetramethyl-8,23-dioxo-4,24-dioxa-9,22-diazatetracyclo[19.3.1.110,14.03,5]hexacosa-10,12,14(26),16,18-pentaen-6-yl] (2S)-2-[3-[[(2R)-3-amino-2-[[(4R,7S,10S,13R,16S,19R)-10-(4-aminobutyl)-19-[[(2R)-2-amino-3-phenylpropanoyl]amino]-7-[(1R)-1-hydroxyethyl]-16-[(4-hydroxyphenyl)methyl]-13-(1H-indol-3-ylmethyl)-6,9,12,15,18-pentaoxo-1,2-dithia-5,8,11,14,17-pentazacycloicosane-4-carbonyl]amino]-3-oxopropyl]disulfanyl]propanoyl-methylamino]propanoate
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
