| Size | Price | Stock | Qty |
|---|---|---|---|
| 1g |
|
||
| Other Sizes |
| Targets |
Myricyl alcohol does not have a specific biological target. It is a natural wax alcohol. It has been studied for its effects on plant growth, where it is believed to act as a plant growth regulator, but its mechanism of action is not well-defined. It is not used as a drug.
|
|---|---|
| ln Vitro |
In vitro, myricyl alcohol has been studied for its potential biological activities, such as anti-inflammatory or antimicrobial effects, but these are not its primary uses. Its main applications are in the cosmetic and chemical industries.
|
| ln Vivo |
In vivo, myricyl alcohol is used as a plant growth regulator. In animals, it is poorly absorbed and is largely excreted unchanged. It is not used therapeutically.
|
| Enzyme Assay |
In vitro assays for myricyl alcohol are not standard, as it is not a biological tool compound. If studied, it might be tested for general cytotoxicity or as a reference compound.
|
| Cell Assay |
Cell-based studies are not applicable for myricyl alcohol as a bioactive compound. It is used as a cosmetic ingredient or a plant growth regulator.
|
| Animal Protocol |
Animal studies are not applicable for myricyl alcohol as a therapeutic agent. It is not used in drug development.
|
| ADME/Pharmacokinetics |
Myricyl alcohol (MW 438.81) is a waxy solid. It is used in cosmetics and as a plant growth regulator.
|
| Toxicity/Toxicokinetics |
Myricyl alcohol is generally considered to have low toxicity. It is a common component of food and cosmetic products.
|
| References |
|
| Additional Infomation |
Triacontan-1-ol is an ultra-long-chain primary fatty alcohol, formed by replacing a terminal methyl hydrogen atom in a triacontane molecule with a hydroxyl group. It is a fatty alcohol (30:0) and also an ultra-long-chain primary fatty alcohol. It has been reported to be found in the tea plant (Camellia sinensis), the jatropha (Jatropha mollissima), and several other organisms with relevant data. See also: saw palmetto (partial); orris root (partial).
Myricyl alcohol is a natural wax alcohol, and its primary applications are in the cosmetic and chemical industries as an emollient, thickener, and plant growth regulator. It is not a drug and has no clinical applications. It is commercially available from various chemical suppliers. |
| Molecular Formula |
C30H62O
|
|---|---|
| Molecular Weight |
438.83
|
| Exact Mass |
438.48
|
| CAS # |
593-50-0
|
| Related CAS # |
67905-26-4 (aluminum salt)
|
| PubChem CID |
68972
|
| Appearance |
White to off-white solid powder
|
| Density |
0.8±0.1 g/cm3
|
| Boiling Point |
443.3±8.0 °C at 760 mmHg
|
| Melting Point |
86-87 °C(lit.)
|
| Flash Point |
130.1±6.0 °C
|
| Vapour Pressure |
0.0±2.4 mmHg at 25°C
|
| Index of Refraction |
1.459
|
| LogP |
14.69
|
| Hydrogen Bond Donor Count |
1
|
| Hydrogen Bond Acceptor Count |
1
|
| Rotatable Bond Count |
28
|
| Heavy Atom Count |
31
|
| Complexity |
288
|
| Defined Atom Stereocenter Count |
0
|
| InChi Key |
REZQBEBOWJAQKS-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C30H62O/c1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-31/h31H,2-30H2,1H3
|
| Chemical Name |
triacontan-1-ol
|
| Synonyms |
NSC-402492; NSC 402492; Myricyl alcohol
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: This product requires protection from light (avoid light exposure) during transportation and storage. |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
H2O : < 0.1 mg/mL
DMSO :< 1 mg/mL |
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 2.2788 mL | 11.3939 mL | 22.7879 mL | |
| 5 mM | 0.4558 mL | 2.2788 mL | 4.5576 mL | |
| 10 mM | 0.2279 mL | 1.1394 mL | 2.2788 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
