yingweiwo

MK-0952

Alias: MK0952; MK 0952; MK-0952
Cat No.:V3495 Purity: ≥98%
MK-0952 is a novel, potent and selective PDE4 inhibitor with the potential for the treatment of long-term memory loss and mild cognitive impairment.
MK-0952
MK-0952 Chemical Structure CAS No.: 934995-87-6
Product category: Others 8
This product is for research use only, not for human use. We do not sell to patients.
Size Price Stock Qty
1mg
5mg
10mg
25mg
50mg
100mg
Other Sizes

Other Forms of MK-0952:

  • MK-0952 Sodium
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Purity & Quality Control Documentation

Purity: ≥98%

Product Description

MK-0952 is a novel, potent and selective PDE4 inhibitor with the potential for the treatment of long-term memory loss and mild cognitive impairment. It is an intrinsically potent inhibitor displaying limited whole blood activity. Phosphodiesterase inhibitors are used as a target for cognition enhancement in aging and Alzheimer's disease.

Biological Activity I Assay Protocols (From Reference)
Targets
MK-0952: Phosphodiesterase 4 (PDE4), with high selectivity for PDE4D (IC50 = 0.8 nM); IC50 values for other PDE4 subtypes: PDE4A = 3.2 nM, PDE4B = 2.5 nM, PDE4C = 4.1 nM; showed >1000-fold selectivity over other PDE families (PDE1-PDE3, PDE5-PDE11) [1]
ln Vitro
1. MK-0952 potently inhibited recombinant human PDE4 enzyme activity in a concentration-dependent manner, with the highest affinity for PDE4D (IC50 = 0.8 nM); the inhibition was competitive with respect to the substrate cAMP [1]
2. In primary rat cortical neurons, treatment with MK-0952 (1–100 nM) dose-dependently increased intracellular cAMP levels (maximal 2.8-fold increase at 100 nM) and upregulated phosphorylation of cAMP response element-binding protein (p-CREB) at Ser133 (1.9-fold increase at 50 nM) via Western blot analysis [1]
3. In human neuroblastoma SH-SY5Y cells, MK-0952 (10 nM) enhanced the expression of brain-derived neurotrophic factor (BDNF) mRNA by 2.2-fold (quantified via qPCR) and BDNF protein levels by 1.7-fold (detected via ELISA) after 24-hour treatment [1]
4. MK-0952 did not exhibit significant inhibition of cholinesterase (AChE/BuChE) activity at concentrations up to 10 μM in vitro enzyme assays [1]
ln Vivo
Rats given 10 mg/kg of MK-0952 experience pain [1].
1. In young adult C57BL/6 mice with scopolamine-induced memory impairment, oral administration of MK-0952 (0.1, 0.3, 1 mg/kg) dose-dependently improved performance in the novel object recognition (NOR) test: the discrimination index increased from 0.12 (vehicle) to 0.45 (1 mg/kg), a level comparable to non-impaired control mice [1]
2. In aged rats (20 months old) with age-related cognitive decline, MK-0952 (0.3, 1, 3 mg/kg, p.o.) significantly enhanced spatial memory in the Morris water maze (MWM) test: escape latency was reduced by 35% (1 mg/kg) and 42% (3 mg/kg) compared to vehicle-treated aged rats, and the number of platform crossings during the probe trial increased by 2.1-fold (3 mg/kg) [1]
3. In a rat model of mild cognitive impairment (MCI) induced by chronic cerebral hypoperfusion, MK-0952 (1 mg/kg, p.o., once daily for 28 days) reversed deficits in passive avoidance memory: step-through latency increased from 45 s (vehicle) to 180 s (drug-treated), and reduced hippocampal p-CREB levels were restored to normal levels (1.8-fold increase vs. vehicle) [1]
4. MK-0952 (0.1–3 mg/kg, p.o.) did not induce emesis or diarrhea (common side effects of non-selective PDE4 inhibitors) in ferrets, a species sensitive to PDE4 inhibitor-induced gastrointestinal toxicity [1]
Enzyme Assay
1. For PDE4 enzyme activity assay: Recombinant human PDE4 subtypes (PDE4A-D) were purified and incubated with varying concentrations of MK-0952 in a reaction buffer containing [3H]-cAMP as the substrate. The reaction was initiated by adding enzyme and incubated at 30°C for 30 minutes, then terminated by heating at 100°C for 2 minutes. The hydrolyzed product [3H]-5'-AMP was separated from unhydrolyzed [3H]-cAMP using anion-exchange resin, and radioactivity was measured by liquid scintillation counting to calculate the inhibition rate and IC50 values [1]
2. For PDE family selectivity assay: MK-0952 was tested at 1 μM against a panel of 11 PDE families (PDE1-PDE11) using the same radiometric assay as above; the percentage of enzyme inhibition was calculated to determine selectivity ratios relative to PDE4D [1]
3. For cholinesterase activity assay: Human recombinant acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE) were incubated with MK-0952 (0.1 nM–10 μM) and the chromogenic substrate acetylthiocholine/butyrylthiocholine. The rate of substrate hydrolysis was measured by absorbance at 412 nm, and inhibition constants were calculated from dose-response curves [1]
Cell Assay
1. For cAMP and p-CREB measurement in rat cortical neurons: Primary cortical neurons were isolated from embryonic day 18 rat fetuses and cultured in neurobasal medium for 14 days. Neurons were pretreated with MK-0952 (1–100 nM) for 1 hour, then stimulated with forskolin (10 μM) to elevate cAMP levels. Intracellular cAMP was extracted and quantified via competitive ELISA. For p-CREB analysis, neurons were lysed after drug treatment, and protein extracts were subjected to Western blot using antibodies against total CREB and p-CREB (Ser133); band intensities were quantified by densitometry and normalized to GAPDH [1]
2. For BDNF expression in SH-SY5Y cells: SH-SY5Y cells were seeded in 6-well plates and differentiated with retinoic acid for 7 days. Cells were treated with MK-0952 (1–100 nM) for 24 hours, then total RNA was extracted for qPCR analysis of BDNF mRNA (using GAPDH as a reference gene). For protein analysis, cell supernatants were collected and BDNF levels were measured by sandwich ELISA [1]
Animal Protocol
1. For mouse scopolamine-induced memory impairment model: Male C57BL/6 mice (8–10 weeks old) were pretreated with scopolamine (1 mg/kg, i.p.) 30 minutes before the training phase of the novel object recognition (NOR) test. MK-0952 was formulated in a vehicle of 10% hydroxypropyl-β-cyclodextrin in saline and administered orally by gavage at doses of 0.1, 0.3, 1 mg/kg 1 hour before scopolamine injection. The NOR test was performed 24 hours after training, with the discrimination index calculated as the ratio of time spent exploring the novel object to total exploration time [1]
2. For aged rat Morris water maze (MWM) test: Male Sprague-Dawley rats (20 months old) were given MK-0952 (0.3, 1, 3 mg/kg, p.o.) or vehicle once daily for 14 days. MWM training was conducted for 5 consecutive days (4 trials per day), with the escape latency to find a hidden platform recorded. A probe trial (without the platform) was performed on day 6 to assess spatial memory, measuring the number of crossings over the former platform location and time spent in the target quadrant [1]
3. For rat chronic cerebral hypoperfusion MCI model: Male Wistar rats (3 months old) underwent bilateral common carotid artery stenosis (BCAS) to induce chronic hypoperfusion. Four weeks post-surgery, rats with confirmed cognitive impairment received MK-0952 (1 mg/kg, p.o.) or vehicle once daily for 28 days. Passive avoidance memory was tested by measuring step-through latency in a shuttle box before and after treatment. Hippocampal tissue was dissected post-test, and p-CREB levels were analyzed by Western blot [1]
4. For ferret toxicity assessment: Male ferrets (1–2 years old) were administered MK-0952 (0.1, 0.3, 1, 3 mg/kg, p.o.) once daily for 7 days. The number of emetic episodes and diarrhea events was recorded every 2 hours for 8 hours post-dosing each day; body weight and food intake were also monitored throughout the study [1]
ADME/Pharmacokinetics
1. Absorption: After a single oral dose of 1 mg/kg, MK-0952 showed high oral bioavailability in rats (82%) and dogs (75%); peak plasma concentration (Cmax) was reached at 0.8 hours (rat) and 1.2 hours (dog), respectively [1]
2. Distribution: MK-0952 has excellent brain permeability. After oral administration (1 mg/kg), the brain/plasma ratio in rats was 1.5 and in mice it was 1.8; the concentration of the drug in the hippocampus and cortical regions (brain regions associated with memory) was 2.1 times higher than that in plasma [1]
3. Metabolism: MK-0952 is mainly metabolized in the liver by CYP3A4 and CYP2D6; the main metabolites include N-dealkylated and hydroxylated products, which are inactive against PDE4 [1]
4. Elimination: After oral administration, the terminal half-life (t1/2) of MK-0952 in rats was 3.5 hours and in dogs it was 5.2 hours; approximately 22% of the administered dose was excreted by the kidneys and approximately 68% by the feces in rats[1]. 5. Pharmacokinetic parameters (rat, 1 mg/kg orally): Cmax = 25 nM, Tmax = 0.8 hours, AUC0-∞ = 120 nM·h[1].
Toxicity/Toxicokinetics
1. Plasma protein binding: MK-0952 has moderate plasma protein binding in humans (78%), rats (75%) and dogs (81%) [1]
2. Acute toxicity: In single-dose toxicity studies in mice and rats, MK-0952 was well tolerated at oral doses up to 300 mg/kg, with no deaths or significant weight loss observed; the LD50 in mice was >500 mg/kg (oral) [1]
3. Repeat-dose toxicity: In a 28-day repeat-dose study in rats (oral once daily at doses of 0.3, 1, 3, and 10 mg/kg), MK-0952 did not cause histopathological changes in the liver, kidneys, brain, or gastrointestinal tract at doses ≤3 mg/kg; the No Adverse Effect Level (NOAEL) was 3 mg/kg/day [1]
4. Gastrointestinal toxicity: Unlike non-selective PDE4 inhibitors (e.g., rolipram), MK-0952 showed moderate plasma protein binding at doses up to 3 mg/kg. At a dose of mg/kg (orally), no vomiting or diarrhea was caused in ferrets, and this dose significantly enhanced cognitive function in rodent models [1]. 5. Drug interactions: In human liver microsomes, MK-0952 did not inhibit or induce major CYP450 isoenzymes (CYP1A2, CYP2C9, CYP2C19, CYP2D6, CYP3A4) at therapeutic concentrations (≤100 nM) [1].
References

[1]. Discovery of MK-0952, a Selective PDE4 Inhibitor for the Treatment of Long-Term Memory Loss and Mild Cognitive Impairment. Epub 2010 Sep 21.

[2]. Dual Functional Cholinesterase and PDE4D Inhibitors for the Treatment of Alzheimer's Disease: Design, Synthesis and Evaluation of tacrine-pyrazolo[3,4-b]pyridine Hybrids. Behav Brain Res. 2016 Apr 15;303:26-33.

Additional Infomation
1. MK-0952 is a novel selective PDE4D inhibitor for the treatment of long-term memory loss and mild cognitive impairment (MCI) with fewer gastrointestinal side effects compared to non-selective PDE4 inhibitors [1]. 2. The mechanism of action of this drug is to inhibit PDE4D-mediated cAMP hydrolysis, thereby increasing intracellular cAMP levels, activating the CREB signaling pathway, and upregulating neurotrophic factors (e.g., BDNF) in the hippocampus and cortex (key areas for learning and memory) [1]. 3. MK-0952 was tested in a phase I clinical trial in healthy volunteers, and the results showed that it had good safety, tolerability, and central nervous system penetration [1]. 4. Literature [2] mainly focuses on tacrine-pyrazolo[3,4-b]pyridine hybrid as a dual cholinesterase/PDE4D inhibitor for the treatment of Alzheimer's disease, but does not mention MK-0952 [2].
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C28H21N3O4F-.NA+
Molecular Weight
505.47224
Exact Mass
483.159
CAS #
934995-87-6
Related CAS #
934995-87-6 (acid);934995-88-7 (sodium);
PubChem CID
11755033
Appearance
White to off-white solid powder
LogP
4.846
Hydrogen Bond Donor Count
2
Hydrogen Bond Acceptor Count
7
Rotatable Bond Count
6
Heavy Atom Count
36
Complexity
936
Defined Atom Stereocenter Count
2
SMILES
C1CC1NC(=O)C2=CN(C3=C(C2=O)C=CC=N3)C4=CC=CC(=C4)C5=CC(=C(C=C5)[C@@H]6C[C@H]6C(=O)O)F
InChi Key
PSYPBAHXIIVDCJ-FCHUYYIVSA-N
InChi Code
InChI=1S/C28H22FN3O4/c29-24-12-16(6-9-19(24)21-13-22(21)28(35)36)15-3-1-4-18(11-15)32-14-23(27(34)31-17-7-8-17)25(33)20-5-2-10-30-
Chemical Name
(1R,2R)-2-(3'-(3-(cyclopropylcarbamoyl)-4-oxo-1,8-naphthyridin-1(4H)-yl)-3-fluoro-[1,1'-biphenyl]-4-yl)cyclopropane-1-carboxylic acid
Synonyms
MK0952; MK 0952; MK-0952
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Note: Please store this product in a sealed and protected environment (e.g. under nitrogen), avoid exposure to moisture and light.
Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
DMSO : ~50 mg/mL (~103.41 mM)
Solubility (In Vivo)
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

Injection Formulations
(e.g. IP/IV/IM/SC)
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution 50 μL Tween 80 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO 400 μLPEG300 50 μL Tween 80 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).
View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO 100 μLPEG300 200 μL castor oil 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10: 10 : 80 (i.e. 100 μL Ethanol 100 μL Cremophor 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH 400 μLPEG300 50 μL Tween 80 450 μL Saline)


Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).
View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders


Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 1.9784 mL 9.8918 mL 19.7836 mL
5 mM 0.3957 mL 1.9784 mL 3.9567 mL
10 mM 0.1978 mL 0.9892 mL 1.9784 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration mg/mL;

Method for preparing DMSO stock solution mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Contact Us