| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
| Targets |
P-glycoprotein (P-gp) (IC50 = 0.51 μM)
|
|---|---|
| ln Vivo |
At present, P-glycoprotein (P-gp) function can be studied using positron emission tomography (PET) together with a labelled P-gp substrate such as R-[11C]verapamil. Such a tracer is, however, less suitable for investigating P-gp (over)expression. Laniquidar is a third-generation P-gp inhibitor, which has been used in clinic trials for modulating multidrug resistance transporters. The purpose of the present study was to develop the radiosynthesis of [11C]laniquidar and to assess its suitability as a tracer of P-gp expression. The radiosynthesis of [11C]laniquidar was performed by methylation of the carboxylic acid precursor with [11C]CH3I. The product was purified by HPLC and reformulated over a tC18 Seppak, yielding a sterile solution of [11C]laniquidar in saline. For evaluating [11C]laniquidar, rats were injected with 20 MBq [11C]laniquidar via a tail vein and sacrificed at 5, 15, 30 and 60 min after injection. Several tissues and distinct brain regions were dissected and counted for radioactivity. In addition, uptake of [11C]laniquidar in rats pretreated with cyclosporine A and valspodar (PSC 833) was determined at 30 min after injection. Finally, the metabolic profile of [11C]laniquidar in plasma was determined. [11C]Laniquidar could be synthesized in moderate yields with high specific activity. Uptake in brain was low, but significantly increased after administration of cyclosporine A. Valspodar did not have any effect on cerebral uptake of [11C]laniquidar. In vivo rate of metabolism was relatively low. Further kinetic studies are needed to investigate the antagonistic behaviour of [11C]laniquidar at tracer level[1].
|
| Animal Protocol |
Resistance to chemotherapy is an obstacle to the successful treatment of acute myeloid leukemia (AML) and myelodysplastic syndrome (MDS). The failure of therapeutic treatment may be due to the development of multidrug resistance (MDR), mechanisms of which include upregulation of membrane-resident transporters which efflux chemotherapeutic drugs from tumor cells, and failure of the cancer cell to undergo apoptosis in response to chemotherapy. Membrane transporter-based drug efflux transporters have been extensively studied, and agents that block drug efflux have been found and investigated. Presence of P-glycoprotein (Pgp, MDR1, ABCB1), a member of the ATP-binding cassette (ABC) transporter family, has been reported to correlate with poor prognosis in AML and MDS. In MDS, Pgp expression increases as the disease progresses. Overexpression of other transporters, such as the multidrug resistance protein (MRP1, ABCC1), and the vault-associated transporter lung resistance protein have been shown as well in both MDS and AML, but their prognostic relevance is not clear. Recently, a novel ABC half-transporter, the breast cancer resistance protein (ABCG2) has been found in approximately 30% of AML cases, and may play a role in resistance to chemotherapy. In clinical trials in MDS, first-generation Pgp blockers, such as cyclosporin-A and verapamil, were minimally effective, non-specific, and toxic. However, another first-generation blocker, quinine, was used in MDS and may specifically benefit MDS patients overexpressing Pgp. A second-generation drug, the non-immunosuppressive cyclosporine analog valspodar (PSC833), was studied in AML and MDS, and was highly toxic, resulting in the need to reduce the dosage of the chemotherapeutic drugs as a result of valspodar reducing the clearance of the chemotherapeutic agents. Third-generation drugs, which are highly specific for Pgp and which seem to have only modest effects on drug clearance, include tariquidar, zosuquidar, laniquidar, and ONT-093. These are all in phase I/II trials and show promise for future treatment.[2]
|
| References |
|
| Additional Infomation |
Laniquidar is currently in clinical trials for breast cancer treatment. Laniquidar is a stereoisomer of verapamil and belongs to the third-generation P-glycoprotein inhibitors. Laniquidar inhibits the drug efflux pump P-glycoprotein, thereby increasing the concentration of antitumor drugs in tumor cells that have developed multidrug resistance due to P-glycoprotein overexpression. (NCI04)
|
| Molecular Formula |
C37H36N4O3
|
|---|---|
| Molecular Weight |
584.70674
|
| Exact Mass |
584.279
|
| CAS # |
197509-46-9
|
| PubChem CID |
6450806
|
| Appearance |
Typically exists as solid at room temperature
|
| Density |
1.24g/cm3
|
| Boiling Point |
793.1ºC at 760mmHg
|
| Flash Point |
433.5ºC
|
| Vapour Pressure |
3.83E-25mmHg at 25°C
|
| Index of Refraction |
1.659
|
| LogP |
6.431
|
| Hydrogen Bond Donor Count |
0
|
| Hydrogen Bond Acceptor Count |
6
|
| Rotatable Bond Count |
8
|
| Heavy Atom Count |
44
|
| Complexity |
985
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
O=C(C1=CN=C2N1CCC3=CC=CC=C3/C2=C4CCN(CCC5=CC=C(OCC6=NC7=CC=CC=C7C=C6)C=C5)CC\4)OC
|
| InChi Key |
TULGGJGJQXESOO-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C37H36N4O3/c1-43-37(42)34-24-38-36-35(32-8-4-2-6-27(32)19-23-41(34)36)29-17-21-40(22-18-29)20-16-26-10-14-31(15-11-26)44-25-30-13-12-28-7-3-5-9-33(28)39-30/h2-15,24H,16-23,25H2,1H3
|
| Chemical Name |
methyl 11-[1-[2-[4-(quinolin-2-ylmethoxy)phenyl]ethyl]piperidin-4-ylidene]-5,6-dihydroimidazo[2,1-b][3]benzazepine-3-carboxylate
|
| Synonyms |
R 101933; Laniquidar; 197509-46-9; Laniquidar [INN]; 11C-laniquidar; K3FRN4DDOY; UNII-K3FRN4DDOY; methyl 11-[1-[2-[4-(quinolin-2-ylmethoxy)phenyl]ethyl]piperidin-4-ylidene]-5,6-dihydroimidazo[2,1-b][3]benzazepine-3-carboxylate; LANIQUIDAR [WHO-DD]; R101933; Laniquidar
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.7102 mL | 8.5512 mL | 17.1025 mL | |
| 5 mM | 0.3420 mL | 1.7102 mL | 3.4205 mL | |
| 10 mM | 0.1710 mL | 0.8551 mL | 1.7102 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
