| Size | Price | |
|---|---|---|
| Other Sizes |
| Targets |
As a protected amino acid building block, Boc-Tyr(Boc)-OH does not have a direct biological target. Its utility lies in its role as a synthetic intermediate for the preparation of peptides and peptide-based compounds. When incorporated into peptides, the tyrosine residue can participate in various interactions, including hydrogen bonding, hydrophobic interactions, and post-translational modifications such as phosphorylation. The dual Boc protection strategy allows for selective deprotection and functionalization of the tyrosine side chain. The compound is a valuable tool for peptide synthesis and for studying tyrosine-containing peptides and proteins.
|
|---|---|
| ln Vitro |
As a synthetic building block, Boc-Tyr(Boc)-OH does not have direct in vitro biological activity. Its value is in peptide synthesis and medicinal chemistry. The compound's in vitro activity would be evaluated indirectly through the biological activity of peptides or compounds synthesized using it. The compound itself is not tested in biological assays but is used as a reagent in chemical synthesis.
|
| ln Vivo |
As a synthetic building block, Boc-Tyr(Boc)-OH does not have in vivo biological activity. Its value is in peptide synthesis and medicinal chemistry. The compound is not intended for administration to animals or humans. Its biological relevance is indirect, through the peptides or compounds that are synthesized using it. The compound itself is a chemical reagent used in research and development.
|
| Enzyme Assay |
In vitro enzyme/receptor binding assays are not applicable to Boc-Tyr(Boc)-OH as it is a synthetic building block with no direct biological activity. The compound is characterized by chemical analysis methods such as HPLC for purity assessment, NMR for structural confirmation, and optical rotation for enantiomeric purity. No enzyme or receptor binding studies have been reported or are relevant for this compound.
|
| Cell Assay |
Cell culture experiments are not applicable to Boc-Tyr(Boc)-OH as it is a synthetic building block with no direct biological activity. The compound is used in chemical synthesis and is not intended for cell-based assays. Researchers using this compound should focus on its chemical properties and synthetic applications rather than cell-based studies.
|
| Animal Protocol |
In vivo animal experiments are not applicable to Boc-Tyr(Boc)-OH as it is a synthetic building block rather than a therapeutic agent. The compound is not intended for administration to animals. Its biological relevance is indirect, through the peptides or compounds that are synthesized using it. Researchers should not attempt in vivo administration of this compound.
|
| ADME/Pharmacokinetics |
Pharmacokinetic properties are not applicable to Boc-Tyr(Boc)-OH as it is a synthetic building block rather than a therapeutic agent. The compound is not intended for administration to animals or humans. Its physicochemical properties include molecular weight 381.42 and molecular formula C19H27NO7. The compound is a solid and should be stored as powder at -20°C for up to 3 years. These properties are relevant for chemical synthesis rather than pharmacokinetics.
|
| Toxicity/Toxicokinetics |
Toxicology data are not applicable to Boc-Tyr(Boc)-OH as it is a synthetic building block rather than a therapeutic agent. The compound is not intended for human use, and comprehensive toxicology studies have not been conducted. The compound should be handled with appropriate safety precautions as a chemical reagent. The compound is for research use only and is not for human use.
|
| Additional Infomation |
Boc-Tyr(Boc)-OH has CAS number 20866-48-2, molecular formula C19H27NO7, and molecular weight 381.42. It is a di-Boc protected tyrosine derivative where both the amino group and the phenolic hydroxyl group are protected by Boc groups. The compound is used in peptide synthesis to prevent side reactions and allow for selective deprotection. Purity is typically ≥95%. Not for human use; for research purposes only.
|
| Molecular Formula |
C19H27NO7
|
|---|---|
| Molecular Weight |
381.42018
|
| Exact Mass |
381.178
|
| CAS # |
20866-48-2
|
| PubChem CID |
7010630
|
| Appearance |
White to off-white solid powder
|
| Density |
1.2±0.1 g/cm3
|
| Boiling Point |
528.4±50.0 °C at 760 mmHg
|
| Flash Point |
273.4±30.1 °C
|
| Vapour Pressure |
0.0±1.5 mmHg at 25°C
|
| Index of Refraction |
1.517
|
| LogP |
3.47
|
| Hydrogen Bond Donor Count |
2
|
| Hydrogen Bond Acceptor Count |
7
|
| Rotatable Bond Count |
10
|
| Heavy Atom Count |
27
|
| Complexity |
525
|
| Defined Atom Stereocenter Count |
1
|
| SMILES |
CC(C)(OC(N[C@H](C(O)=O)CC1=CC=C(OC(OC(C)(C)C)=O)C=C1)=O)C
|
| InChi Key |
MRYIHKCPPKHOPJ-AWEZNQCLSA-N
|
| InChi Code |
InChI=1S/C19H27NO7/c1-18(2,3)26-16(23)20-14(15(21)22)11-12-7-9-13(10-8-12)25-17(24)27-19(4,5)6/h7-10,14H,11H2,1-6H3,(H,20,23)(H,21,22)/t14-/m0/s1
|
| Chemical Name |
(2S)-2-[(2-methylpropan-2-yl)oxycarbonylamino]-3-[4-[(2-methylpropan-2-yl)oxycarbonyloxy]phenyl]propanoic acid
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
|---|
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 2.6218 mL | 13.1089 mL | 26.2178 mL | |
| 5 mM | 0.5244 mL | 2.6218 mL | 5.2436 mL | |
| 10 mM | 0.2622 mL | 1.3109 mL | 2.6218 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
