Amorolfine is a member of the class of morpholines that is cis-2,6-dimethylmorpholine in which the hydrogen attached to the nitrogen is replaced by a racemic 2-methyl-3-[p-(2-methylbutan-2-yl)phenyl]propyl group. An inhibitor of the action of squalene monooxygenase, Delta(14) reductase and D7-D8 isomerase and an antifungal agent, it is used (generally as its hydrochloride salt) for the topical treatment of fungal nail and skin infections. It has a role as an EC 1.14.13.132 (squalene monooxygenase) inhibitor, an EC 5.3.3.5 (cholestenol Delta-isomerase) inhibitor and an EC 1.3.1.70 (Delta(14)-sterol reductase) inhibitor. It is a tertiary amino compound and a morpholine antifungal drug. It is a conjugate acid of an amorolfine(1+).
Amorolfine or amorolfin, is a morpholine antifungal drug that inhibits the fungal enzymes D14 reductase and D7-D8 isomerase. This inhibition affects fungal sterol synthesis pathways, depleting ergosterol and causing ignosterol to accumulate in the fungal cytoplasmic cell membranes. Amorolfine is marketed as Curanail, Loceryl, Locetar, and Odenil. It is available in the form of a 5% amorolfine nail lacquer used to treat onychomycosis (fungal infection of the toe- and fingernails). Amorolfine 5% nail lacquer in once or twice weekly applications is 60-71% effective in treating toenail onychomycosis; complete cure rates three months after stopping treatment (after six months of treatment) were 38-46%. However, full experimental details of these trials were not available and since they were first reported in 1992 there have been no subsequent trials. It is a topical solution for the treatment of toenail infections. Systemic treatments may be considered more effective. It is approved for sale over the counter in Australia and the UK (recently re-classified to over the counter status), and is approved for the treatment of toenail fungus by prescription in other countries. It is not approved for the treatment of onychomycosis in the United States or Canada.
Amorolfine is a morpholine antifungal agent for topical use. Amorolfine inhibits delta-14-reductase and delta-7,8-isomerase, which depletes ergosterol and causes ignosterol to accumulate in the fungal cytoplasmic cell membrane.

C21H35NO

317.5087

317.271

78613-35-1

67467-83-8;78613-35-1;78613-38-4 (HCl);

54260

Typically exists as solid at room temperature

0.9±0.1 g/cm3

407.1±33.0 °C at 760 mmHg

134ºC

119.6±27.7 °C

0.0±0.9 mmHg at 25°C

1.489

5.73

0

2

6

23

336

2

CCC(C)(C)C1=CC=C(C=C1)CC(C)CN2C[C@H](C)O[C@H](C)C2

MQHLMHIZUIDKOO-AYHJJNSGSA-N

InChI=1S/C21H35NO/c1-7-21(5,6)20-10-8-19(9-11-20)12-16(2)13-22-14-17(3)23-18(4)15-22/h8-11,16-18H,7,12-15H2,1-6H3/t16?,17-,18+

(2R,6S)-2,6-dimethyl-4-[2-methyl-3-[4-(2-methylbutan-2-yl)phenyl]propyl]morpholine

2934.99.9001

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

---

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

---

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

---

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

---

 (Please use freshly prepared in vivo formulations for optimal results.)