| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
Purity: ≥98%
| Targets |
Herpes simplex virus ribonucleotide reductase and varicella-zoster virus ribonucleotide reductase
|
|---|---|
| ln Vitro |
Potently inactivates the ribonucleotide reductases (EC 1.17.4.1) encoded by herpes simplex virus types 1 and 2 and by varicella-zoster virus, while being a weaker inactivator of human ribonucleotide reductase. A1110U markedly potentiated the antiherpetic activity of acyclovir against these viruses in tissue culture.
|
| ln Vivo |
Acts as a potentiator of acyclovir, showing synergistic effects with acyclovir to produce chemotherapeutic effects on herpes skin lesions in animal models. A1110U both decreased the dGTP pool that builds up when infected cells are treated with acyclovir and induced a large increase in the pool of acyclovir triphosphate.
|
| Enzyme Assay |
Enzyme inactivation assays were performed to determine the compound's inhibitory activity against viral ribonucleotide reductases. The compound was characterized as a potent inactivator of HSV-1, HSV-2, and VZV ribonucleotide reductases.
|
| Cell Assay |
Cell-based assays were used to measure the antiviral activity of A1110U and its ability to potentiate the effects of acyclovir, confirming its synergistic mechanism. The resultant 100-fold increase in the ratio of acyclovir triphosphate to dGTP facilitates binding of the fraudulent nucleotide to its target enzyme.
|
| Animal Protocol |
The compound was evaluated in animal models of herpes virus infection, where it demonstrated synergistic chemotherapeutic effects when combined with acyclovir. Synergistic toxic interactions between A1110U and acyclovir were not detected in uninfected cells.
|
| References |
Proc Natl Acad Sci U S A.1989 Feb;86(3):1051-5.
|
| Additional Infomation |
See also: A 1110U (Note moved to).
|
| Molecular Formula |
C11H16N6S2
|
|
|---|---|---|
| Molecular Weight |
296.4149
|
|
| Exact Mass |
296.087
|
|
| CAS # |
96860-23-0
|
|
| Related CAS # |
|
|
| PubChem CID |
9554760
|
|
| Appearance |
Typically exists as solid at room temperature
|
|
| Density |
1.3±0.1 g/cm3
|
|
| Boiling Point |
415.1±37.0 °C at 760 mmHg
|
|
| Flash Point |
204.9±26.5 °C
|
|
| Vapour Pressure |
0.0±1.0 mmHg at 25°C
|
|
| Index of Refraction |
1.650
|
|
| LogP |
1.22
|
|
| tPSA |
128.76
|
|
| Hydrogen Bond Donor Count |
3
|
|
| Hydrogen Bond Acceptor Count |
4
|
|
| Rotatable Bond Count |
2
|
|
| Heavy Atom Count |
19
|
|
| Complexity |
355
|
|
| Defined Atom Stereocenter Count |
0
|
|
| SMILES |
CN(C)C(NNC(N/N=C(\C1C=CC=CN=1)/C)=S)=S
|
|
| InChi Key |
RPMMBVWROKDIKM-MDWZMJQESA-N
|
|
| InChi Code |
InChI=1S/C11H16N6S2/c1-8(9-6-4-5-7-12-9)13-14-10(18)15-16-11(19)17(2)3/h4-7H,1-3H3,(H,16,19)(H2,14,15,18)/b13-8+
|
|
| Chemical Name |
1,1-dimethyl-3-[[(E)-1-pyridin-2-ylethylideneamino]carbamothioylamino]thiourea
|
|
| Synonyms |
|
|
| HS Tariff Code |
2934.99.9001
|
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
|
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
|
|||
|---|---|---|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400  (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 3.3737 mL | 16.8685 mL | 33.7371 mL | |
| 5 mM | 0.6747 mL | 3.3737 mL | 6.7474 mL | |
| 10 mM | 0.3374 mL | 1.6869 mL | 3.3737 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration: mg/mL;
Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Proc Natl Acad Sci U S A.1989 Feb;86(3):1051-5. th> |
|---|
Proc Natl Acad Sci U S A.1989 Feb;86(3):1051-5. td> |
Proc Natl Acad Sci U S A.1989 Feb;86(3):1051-5. td> |