Human Endogenous Metabolite; Acetyl-CoA targets a wide range of enzymes and transporters that utilize it as a substrate or ligand. Its targets include: (1) Acetyl-CoA Carboxylase (ACC): Acetyl-CoA serves as the substrate for this enzyme to synthesize malonyl-CoA ; (2) Citrate Synthase: In the TCA cycle, acetyl-CoA condenses with oxaloacetate catalyzed by this enzyme to form citrate ; (3) SLC33A1 (AT-1): This is the only identified acetyl-CoA transmembrane transporter, located on the ER membrane, responsible for translocating acetyl-CoA from the cytosol into the ER lumen ; (4) NLRX1: A mitophagy receptor. Cytosolic acetyl-CoA acts as a signaling metabolite that directly binds to NLRX1 to regulate nutrient starvation-induced mitophagy. In vitro binding assays showed that unlabeled acetyl-CoA competes with biotin-acetyl-CoA for binding to recombinant NLRX1 protein with a saturation concentration of approximately 25 μM .

In starved U2OS cells, acetyl coenzyme A decreases starvation-induced autophagy flux while increasing cytoplasmic protein acetylation. (U2OS cells are microinjected with Acetyl Coenzyme A and stably express GFP-LC3. They are then treated with 100 nM BafA1 for three hours in the absence of nutrients, after which they are fixed)[2].

---

- In starved U2OS cells, microinjection of acetyl-CoA reduced starvation-induced autophagic flux while increasing cytoplasmic protein acetylation .
- In U2OS cells stably expressing GFP-LC3, treatment with mild starvation medium (containing 5 mM glucose and 2 mM glutamine) reduced cytosolic acetyl-CoA levels, significantly decreased the levels of mitochondrial proteins TIM23, MT-CO2, and HSP60, and increased the recruitment of LC3 to mitochondria, indicating that the reduction in mitochondrial mass resulted from autophagic degradation .
- In KRAS-mutant cancer cells (e.g., KPC and AsPC-1 cells), treatment with KRAS inhibitors (MRTX1133 and RMC-6236) significantly reduced ACLY expression and cytosolic acetyl-CoA levels and induced mitophagy, an effect that was blocked by acetate supplementation .

Acetyl coenzyme A prevents mice from developing cardiomyopathy brought on by pressure overload [2][3]. In various organs, including the heart and muscle, mice given no meal for a full day displayed markedly lower levels of total Acetyl coenzyme A, which is correlated with lower levels of protein acetylation. However, the mice were allowed unlimited access to water. The liver's levels of protein acetylation and acetyl coenzyme A were elevated under the identical experimental settings, but there was no discernible impact on brain acetyl coenzyme A concentrations [4].

---

- In vivo, acetyl-CoA protects mice from cardiomyopathy induced by pressure overload .
- In mouse studies, one day of fasting led to significantly lower total acetyl-CoA levels in organs including the heart and muscle, which correlated with lower protein acetylation levels; however, under the same experimental conditions, liver protein acetylation and acetyl-CoA levels increased, with no apparent effect on brain acetyl-CoA concentration .
- In a study on KRAS inhibitor resistance mechanisms, using an in vivo xenograft tumor model, it was found that NLRX1 knockout significantly enhanced the anti-tumor effect of the KRAS inhibitor MRTX1133 on KPC tumors (manifested as reduced tumor volume and weight), while reactive oxygen species levels increased and mitophagy was impaired in the tumor tissue, indicating that KRAS inhibitors induce NLRX1-dependent mitophagy to help tumor cells resist oxidative stress and develop drug resistance .

- Acetyl-CoA Carboxylase (ACC) Activity Assay (NADH Rate Method): This principle is based on ACC catalyzing the conversion of acetyl-CoA, NaHCO3, and ATP to malonyl-CoA, ADP, and inorganic phosphate. The generated ADP is converted to ATP and pyruvate from phosphoenolpyruvate via pyruvate kinase, and pyruvate is further converted to lactate with the concomitant oxidation of NADH to NAD+. Since NADH has a characteristic absorption peak at 340 nm, ACC activity is calculated by monitoring the decrease in absorbance at 340 nm .
- Acetyl-CoA Carboxylase Activity Assay (Non-radioactive Spectrophotometric Method): Permeabilized Corynebacterium glutamicum cells are added to an assay mixture containing acetyl-CoA, bicarbonate, magnesium, and ATP. Aliquots are removed at set time points, and the reaction is stopped by adding trifluoroacetic acid. The level of acetyl-CoA remaining in each aliquot is determined via a citrate synthase assay, in which the formation of the yellow compound dithiobisnitrobenzoic acid-thiophenolate is followed spectrophotometrically at 412 nm .
- NLRX1 and Acetyl-CoA Direct Binding Assay (Pull-down Assay): Recombinant NLRX1 protein with an N-terminal MBP tag is purified using an insect cell expression system. In the in vitro pull-down assay, the recombinant MBP-NLRX1 protein is incubated with biotin-labeled acetyl-CoA, and the complex is captured using streptavidin magnetic beads. After elution, MBP-NLRX1 is detected by Western blot. Unlabeled acetyl-CoA competes with biotin-acetyl-CoA for binding to recombinant NLRX1 protein in a dose-dependent manner, with a saturation concentration of approximately 25 μM for competition .

- Cell Culture and Starvation Treatment: U2OS cells (stably expressing GFP-LC3) are cultured in regular medium. To induce autophagy, the medium is replaced with mild starvation medium (containing 5 mM glucose and 2 mM glutamine) and incubated for a specified time (e.g., 3 hours). To block autophagic flux, BafA1 (100 nM) can be added before treatment. After treatment, cells are washed with PBS, lysed, and mitochondrial protein levels (e.g., TIM23, MT-CO2, HSP60) are detected by Western blot, or GFP-LC3 puncta formation is observed by fluorescence microscopy .
- Acetyl-CoA Microinjection: In starved U2OS cells, acetyl-CoA is directly introduced into the cytoplasm via microinjection. After injection, cells are treated with BafA1 (100 nM) under nutrient-free conditions for 3 hours and then fixed. Autophagic flux is assessed by detecting GFP-LC3 puncta, while cytoplasmic protein acetylation levels are also measured .
- KRAS Inhibitor Treatment: KRAS-mutant cancer cells (e.g., KPC or AsPC-1 cells) are seeded in culture plates. Cells are treated with KRAS inhibitors MRTX1133 or RMC-6236. Control groups (DMSO) and acetate supplementation groups (to verify the specific effect of acetyl-CoA) are also set up. After treatment, cells are harvested, and ACLY expression levels, mitochondrial protein levels, and acetyl-CoA levels are detected by Western blot .

- Cardiomyopathy Model: A mouse model of cardiomyopathy is induced by pressure overload. Acetyl-CoA is administered to evaluate its preventive effect on cardiomyopathy .
- Fasting Experiment: Mice are divided into an ad libitum feeding group and a fasting group (fasted for 24 hours with free access to water). After fasting, mice are sacrificed, and heart, muscle, liver, and brain tissues are collected. Total acetyl-CoA levels in each tissue are measured by LC-MS, and protein acetylation levels are detected by Western blot .
- Tumor Xenograft Model: KPC cells (KRAS-mutant pancreatic cancer cells) are subcutaneously inoculated into immunodeficient mice to establish a xenograft tumor model. After tumors reach a certain volume, mice are randomly divided into a control group and a treatment group (e.g., KRAS inhibitor MRTX1133). In some experiments, NLRX1-knockout KPC cells are used. KRAS inhibitors are administered by oral gavage or intraperitoneal injection. Tumor volume and body weight are measured regularly during the administration period. At the end of the experiment, mice are sacrificed, tumor tissues are excised and weighed, and reactive oxygen species levels and mitophagy-related indicators are measured in the tumor tissue .

Traditional pharmacokinetic parameters for acetyl-CoA itself are not described in the literature. Acetyl-CoA is a large, charged molecule (MW ~800) that is unable to freely diffuse across cellular membranes and requires specific transporter proteins (such as SLC33A1) to facilitate its transmembrane movement . Under laboratory conditions, aqueous solutions of acetyl-CoA can be stored at -20°C for up to 2 weeks .

Direct toxicity information for acetyl-CoA itself is not described in the literature. As an endogenous metabolite, it does not exhibit toxicity at physiological concentrations. According to supplier information, Acetyl Coenzyme A Trilithium Salt is not regulated for transport and is considered non-hazardous . It is important to note that disruption of acetyl-CoA homeostasis is associated with various diseases, including neurodegenerative disorders, aging-related conditions, and cancer . For example, either insufficient or excessive activity of the SLC33A1 transporter can lead to diseases, especially those affecting the nervous system .

[1]. The growing landscape of lysine acetylation links metabolism and cell signalling. Nat Rev Mol Cell Biol. 2014 Aug;15(8):536-50.

[2]. Regulation of autophagy by cytosolic acetyl-coenzyme A. Mol Cell. 2014 Mar 6;53(5):710-25.

[3]. Cardiac autophagy is a maladaptive response to hemodynamic stress. J Clin Invest. 2007 Jul;117(7):1782-93.

[4]. Acetyl coenzyme A: a central metabolite and second messenger. Cell Metab. 2015 Jun 2;21(6):805-21.

Acetyl-CoA is an acyl-CoA enzyme with an acetyl group at its S-acetyl moiety. It functions as an effector, coenzyme, acyl donor, and basic metabolite. Its function is related to acetic acid and coenzyme A. It is the conjugate acid of acetyl-CoA(4-). Acetyl-CoA is found in or produced by Escherichia coli (K12 strain, MG1655 strain). It has also been reported to exist in fruit flies, humans, and other organisms with relevant data. Acetyl-CoA is a condensation product of coenzyme A and acetic acid, participating in the biosynthesis of fatty acids and sterols, fatty acid oxidation, and the metabolism of various amino acids. Furthermore, acetyl-CoA is a biological acetylation agent. Acetyl-CoA is a metabolite found or produced in Saccharomyces cerevisiae. Acetyl-CoA participates in the biosynthesis of fatty acids and sterols, fatty acid oxidation, and the metabolism of various amino acids. It is also a biological acetylation agent.

---

- Background and Function: Acetyl-CoA is one of the most critical metabolic intermediates in the cell, widely present in various cellular compartments including the cytoplasm, nucleus, mitochondria, endoplasmic reticulum, and peroxisomes . Beyond its role as a substrate for energy metabolism and lipid synthesis, acetyl-CoA also acts as a signaling metabolite. Research has revealed that cytosolic acetyl-CoA acts as a signaling metabolite that directly binds to the mitophagy receptor NLRX1 to regulate nutrient starvation-induced mitophagy, establishing a direct link between metabolite sensing and mitochondrial quality control .
- Clinical Relevance: Targeting acetyl-CoA metabolism has emerged as a potential strategy for treating various diseases. For example, inhibition of acetyl-CoA metabolic enzymes (ACLY and ACSS2) impairs hepatic stellate cell activation and reverses MASH and fibrosis . Furthermore, targeting the AcCoA-NLRX1 signaling axis may represent a novel strategy to enhance the efficacy of KRAS inhibitors .
- Laboratory Applications: In the laboratory, acetyl-CoA can be used as a substrate in chloramphenicol acetyltransferase (CAT) transcription reporter assays or in histone acetyltransferase (HAT) assays in epigenetics research. Its solubility in water is 10 mg/mL .

C23H38N7O17P3S

809.57

809.125

C, 34.12; H, 4.73; N, 12.11; O, 33.60; P, 11.48; S, 3.96

72-89-9

Acetyl Coenzyme A trisodium;102029-73-2;Acetyl coenzyme A lithium;32140-51-5;Acetyl coenzyme A trilithium;75520-41-1

444493

Typically exists as solid at room temperature

1.9±0.1 g/cm3

1.718

-5.6

9

22

20

51

1380

5

CC(=O)SCCNC(=O)CCNC(=O)[C@@H](C(C)(C)COP(=O)(O)OP(=O)(O)OC[C@@H]1[C@H]([C@H]([C@@H](O1)N2C=NC3=C(N=CN=C32)N)O)OP(=O)(O)O)O

ZSLZBFCDCINBPY-ZSJPKINUSA-N

InChI=1S/C23H38N7O17P3S/c1-12(31)51-7-6-25-14(32)4-5-26-21(35)18(34)23(2,3)9-44-50(41,42)47-49(39,40)43-8-13-17(46-48(36,37)38)16(33)22(45-13)30-11-29-15-19(24)27-10-28-20(15)30/h10-11,13,16-18,22,33-34H,4-9H2,1-3H3,(H,25,32)(H,26,35)(H,39,40)(H,41,42)(H2,24,27,28)(H2,36,37,38)/t13-,16-,17-,18+,22-/m1/s1

S-[2-[3-[[(2R)-4-[[[(2R,3S,4R,5R)-5-(6-aminopurin-9-yl)-4-hydroxy-3-phosphonooxyoxolan-2-yl]methoxy-hydroxyphosphoryl]oxy-hydroxyphosphoryl]oxy-2-hydroxy-3,3-dimethylbutanoyl]amino]propanoylamino]ethyl] ethanethioate

Acetyl coenzyme A; ACETYL COENZYME A; acetyl-CoA; Acetyl CoA; 72-89-9; S-Acetyl coenzyme A; Acetyl-CoA; Acetyl CoA; S-Acetyl coenzyme A; AcCoA; S-acetyl-CoA; acetyl-S-CoA; ac-CoA; ac-S-CoA; acetylcoenzyme-A

2934.99.9001

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

---

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

---

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

---

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

---

 (Please use freshly prepared in vivo formulations for optimal results.)