yingweiwo

Seladelpar sodium salt (MBX-8025 sodium salt; RWJ-800025 sodium salt)

Alias: Seladelpar sodium salt; 3026272-26-1; MBX-8025 sodium salt; 2751530-13-7; orb573407;
Cat No.:V76523 Purity: ≥98%
Seladelpar sodium salt (MBX-8025) is an orally bioactive, selective PPARδ agonist/activator with EC50 of 2 nM.
Seladelpar sodium salt (MBX-8025 sodium salt; RWJ-800025 sodium salt)
Seladelpar sodium salt (MBX-8025 sodium salt; RWJ-800025 sodium salt) Chemical Structure CAS No.: 3026272-26-1
Product category: PPAR
This product is for research use only, not for human use. We do not sell to patients.
Size Price Stock Qty
1mg
5mg
10mg
50mg
Other Sizes

Other Forms of Seladelpar sodium salt (MBX-8025 sodium salt; RWJ-800025 sodium salt):

  • Seladelpar (lysine)
  • Seladelpar (MBX8025, RWJ800025)
  • Seladelpar lysine hydrate
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Product Description
Seladelpar sodium salt (MBX-8025) is an orally bioactive, selective PPARδ agonist/activator with EC50 of 2 nM. Its selectivity for PPARδ is over 750 and 2500 times that for PPARα and PPARγ, respectively. The US Food and Drug Administration (FDA) granted accelerated approval for Livdelzi (seladelpar) in August 2024, following the acceptance of a new drug application (NDA) for priority review in February 2024. The NDA was submitted by CymaBay Therapeutics in December 2023.
Seladelpar (Livdelzi; Gilead Sciences Inc) was granted accelerated approval by the FDA for the treatment of primary biliary cholangitis (PBC) in combination with ursodeoxycholic acid (UDCA) in adult patients who have had an inadequate response to UDCA or as monotherapy in patients unable to tolerate UDCA. The decision is based on positive data from the phase 3 RESPONSE study (NCT04620733) demonstrating seladelpar’s capabilities in reducing alkaline phosphatase (ALP) values.
PBC is a rare, incurable, chronic inflammatory liver disease affecting nearly 130,000 individuals, primarily women, in the US. It is characterized by impaired bile flow and the accumulation toxic bile acids, leading to inflammation and damaging of bile ducts in the liver. The most common symptoms of PBC are pruritis (itchiness), fatigue, nausea, or poor appetite and weight loss. In cases of worsening liver function, patients might experience edema, jaundice, abnormal bleeding, or confusion. Treatment for PBC is primarily focused in easing symptoms and preventing complications through use of medications to relieve itching and vitamin replacement therapy to restore vitamins lost in fatty stools.
The approval has the potential to make seladelpar available as a PBC treatment that has achieved statistically significant improvements across key biomarkers, alkaline phosphatase (ALP) normalization, and pruritus versus placebo. It is an oral PPAR-delta agonist capable of regulating critical metabolic and liver disease pathways to regulate bile acid synthesis, inflammation, lipid metabolism, and transport and fibrosis.
Biological Activity I Assay Protocols (From Reference)
Targets
PPAR-δ 2 nM (EC50)
ln Vitro
MBX-8025 is a PPARδ agonist that is being developed as a lipid-altering therapy. It is orally active, powerful (EC50=2 nM), and selective (750-fold and 2500-fold compared with PPARα or PPARγ receptors, respectively).
ln Vivo
Seladelpar sodium salt injection results in a ~18% (P<0.05) reduction in body weight in Wt mice fed an atherogenic diet. On the other hand, Seladelpar sodium salt had very little influence on body weight in mice fed an atherogenic diet (foz/foz). Serum alanine aminotransferase (ALT) levels are lowered in foz/foz mice (P<0.05) and Wt mice in a comparable (though not statistically significant) manner by seladelpar sodium salt. In both genotypes, seladelpar sodium salt lowers triglycerides and normalizes blood cholesterol (P<0.05). Hepatocyte ballooning is eliminated by salt (P<0.05), and the nonalcoholic fatty liver disease (NAFLD) activity score is reduced by approximately 50%. Additionally, in foz/foz mice, seleadelpar sodium salt dramatically lowers sirius red-positive regions (P<0.05)[4].
Animal Protocol
Mice: Atherogenic diet (23 percent fat, 0.2 percent cholesterol, and 45 percent simple carbohydrate; 4.78 kcal/g digestible energy) is fed ad libitum to Alms1 mutant (foz/foz) NOD.B10 mice or Wt littermates (female mice in both groups) from the time of weaning (week 4). Following this, groups are randomized (n=8–12 mice/group) to once-daily oral administration (by gavage) of Seladelpar (10 mg/kg in 1% methylcellulose) or vehicle (controls) for 8 weeks. Animals are kept in housing with a 12-hour light/dark cycle, a constant temperature of 22°C, and the highest level of humane treatment[2].
ADME/Pharmacokinetics
Absorption
After a single dose, systemic exposure to celardpa increases proportionally with increasing dose, from 2 mg (0.2 times the recommended dose) to 15 mg (1.5 times the recommended dose), and then increases dose-proportionally with higher doses. When the dose increases from 10 mg to 200 mg (20 times the recommended dose), the mean Cmax and mean AUC of celardpa increase by 70-fold and 27-fold, respectively. After once-daily administration, celardpa reaches steady state on day 4, with an AUC increase of less than 30%. In patients with primary biliary cholangitis (PBC), after reaching steady state with once-daily administration of 10 mg celardpa, the mean (standard deviation) Cmax and AUC are 103 (29.3) ng/mL and 902 (238) ng·h/mL, respectively. The median time to peak concentration (Tmax) of celardpa is 1.5 hours. No clinically significant differences in the pharmacokinetics of seladelpar were observed in healthy subjects after ingestion of a high-fat meal.
Excretion Route
Seladelpar is primarily excreted in the urine as a metabolite. Following a single oral dose of 10 mg of radiolabeled seladelpar in humans, approximately 73.4% of the dose is excreted in the urine (less than 0.01% unchanged drug) and 19.5% is excreted in the feces (2.02% unchanged drug). Animal studies suggest that seladelpar may be excreted in the bile.
Volume of Distribution
The steady-state apparent volume of distribution of seladelpar is approximately 133.2 L.
Clearance
The apparent oral clearance of seladelpar is 12 L/h.
Protein Binding
The plasma protein binding of seladelpar is greater than 99%.
Metabolism/Metabolites
Seladelpar is primarily metabolized in vitro via CYP2C9, with minor metabolism via CYP2C8 and CYP3A4, yielding three major metabolites: seladelpar sulfoxide (M1), desethylseladelpar (M2), and desethylseladelpar sulfoxide (M3). The AUC ratios of the metabolites to the parent drug for M1, M2, and M3 are 0.36, 2.32, and 0.63, respectively. The median Tmax for the metabolites are 10 hours for M1, and 4 hours for both M2 and M3. All major metabolites are pharmacologically inactive.
Biological Half-Life
In healthy subjects, the mean elimination half-life of seladelpar is 6 hours after a single 10 mg dose. In patients with PBC, the half-life of seladelpar ranges from 3.8 to 6.7 hours.
Toxicity/Toxicokinetics
Hepatotoxicity
In pre-registration clinical trials, seladelpar was found to significantly reduce serum transaminase and alkaline phosphatase levels in most patients with primary biliary cholangitis (PBC). However, in an initial dose-exploration study of PBC patients, 3 out of 25 subjects (taking 50 mg and 200 mg daily) experienced transient increases in ALT and AST levels exceeding the upper limit of normal (ULN) by more than 5 times, while this did not occur in the placebo group. These increases occurred over several months of treatment and returned rapidly upon discontinuation of the drug. Notably, alkaline phosphatase levels decreased significantly during the ALT elevation and returned to pre-treatment levels quickly after discontinuation of the drug. In contrast, in subsequent clinical trials of seladelpar at a daily dose of 10 mg in PBC patients, ALT elevations exceeding 5 times the ULN were rare, occurred randomly, and were generally attributed to other causes. In a large, pre-registered, randomized, placebo-controlled trial, 2 out of 128 patients (1.6%) receiving seladelpar discontinued treatment due to abnormal liver function, compared to 2 out of 65 patients (3.1%) receiving placebo. No clinically significant liver injury caused by seladelpar has been reported in several small clinical trials. However, clinical experience with seladelpar is generally limited, and rare drug-induced liver injury is known to occur with other PPAR agonists such as fenofibrate, bezafibrate, pioglitazone, and rosiglitazone. In long-term extended studies, a small number of patients taking seladelpar experienced decompensation and jaundice, but all of these cases occurred in patients with pre-existing cirrhosis and were explained as being due to disease progression and unrelated to treatment. However, seladelpar and other PPAR agonists are not recommended for patients with advanced or decompensated cirrhosis, and regular monitoring of liver function is advised during treatment. Probability score: E (Unproven but suspected rare cause of clinically significant liver injury).
References

[1]. New peroxisome proliferator-activated receptor agonists: potential treatments for atherogenic dyslipidemia and non-alcoholic fatty liver disease. Expert Opin Pharmacother. 2014 Mar;15(4):493-503.

[2]. MBX-8025, a novel peroxisome proliferator receptor-delta agonist: lipid and other metabolic effects in dyslipidemic overweight patients treated with and without atorvastatin. J Clin Endocrinol Metab. 2011 Sep;96(9):2889-97.

[3]. Effects of the PPAR-δ agonist MBX-8025 on atherogenic dyslipidemia. Atherosclerosis. 2012 Feb;220(2):470-6.

[4]. The selective peroxisome proliferator-activated receptor-delta agonist seladelpar reverses nonalcoholic steatohepatitis pathology by abrogating lipotoxicity in diabetic obese mice. Hepatol Commun. 2017 Jul 31;1(7):663-674.

Additional Infomation
Seradepar (MBX-8025) has been used in clinical trials for the treatment of hyperlipidemia.
Drug Indications
Treatment of primary biliary cholangitis
Mechanism of Action
Peroxisome proliferator-activated receptors (PPARs) belong to the nuclear hormone receptor superfamily, which includes three members: PPAR-α, PPAR-δ, and PPAR-γ. Each PPAR plays a role in maintaining energy homeostasis and metabolic functions, such as fatty acid metabolism, bile acid synthesis, and adipocyte differentiation. In chronic liver diseases such as primary biliary cholangitis (PBC) and non-alcoholic steatohepatitis (NASH), altered bile acid composition and elevated systemic bile acid levels are observed. Seradepar is a PPAR-δ agonist; however, the mechanism by which seradepar exerts its therapeutic effect in patients with PBC is not fully understood. Potential pharmacological activities related to therapeutic efficacy include inhibition of bile acid synthesis through activation of PPARδ. Published studies have shown that celadepa activation of PPARδ can reduce bile acid synthesis by inducing fibroblast growth factor 21 (FGF21), thereby activating the c-Jun N-terminal kinase (JNK) signaling pathway. This effect subsequently downregulates CYP7A1, a key enzyme in cholesterol-to-bile acid synthesis. Studies have shown that celadepa's inhibitory effect on bile acid synthesis is independent of the farnesoid X receptor (FXR) pathway, another molecular pathway regulating hepatic bile acid synthesis.
Pharmacodynamics
Celadepa can reduce total bile acid levels and decrease bile acid synthesis in patients with primary biliary cholangitis (PBC). Studies have shown that elevated bile acid concentrations in hepatobiliary diseases, including primary biliary cholangitis (PBC), can lead to elevated alkaline phosphatase (ALP) levels. In PBC patients treated with 10 mg seladelpar once daily, a significant reduction in mean ALP levels from baseline was observed one month after treatment compared to the placebo group, and the lower ALP levels typically persisted until month 12. In another study, a dose-dependent reduction in mean ALP levels was also observed in PBC patients treated with 2 mg, 5 mg, or 10 mg seladelpar once daily. Seladelpar is a peroxisome proliferator-activated receptor (PPAR)-δ agonist. Seladelpar is a single enantiomer of the R configuration. On August 14, 2024, the FDA granted accelerated approval to seladelpar for the treatment of primary biliary cholangitis, a disease associated with abnormal bile acid metabolism. Seladelpar works by blocking bile acid synthesis.
Serradepa is an oral peroxisome proliferator-activated receptor delta (PPARδ) agonist used in combination with ursodeoxycholic acid to treat primary biliary cholangitis (PBC). Rarely, elevated liver enzymes have been observed during serradepa treatment, but there is no conclusive evidence linking them to clinically significant liver damage with jaundice.
Serradepa is an orally bioavailable peroxisome proliferator-activated receptor (PPAR)-δ (PPARd) agonist whose activity is reduced by bile acids. After oral administration, serradepa targets, binds to, and activates PPARd in the liver. This induces the expression of fibroblast growth factor 21 (FGF21), which downregulates the activity of CYP7A1, a key enzyme in the synthesis of bile acids from cholesterol. By reducing CYP7A1 expression, bile acid synthesis is reduced. This may alleviate inflammation and scarring associated with primary biliary cholangitis (PBC). SELADELPAR is a small molecule drug that has completed Phase IV clinical trials (covering all indications) and was first approved in 2024 for the treatment of biliary cirrhosis. It also has 6 investigational indications.
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C21H22F3NAO5S
Molecular Weight
466.45
Exact Mass
466.103773
Elemental Analysis
C, 54.07; H, 4.75; F, 12.22; Na, 4.93; O, 17.15; S, 6.87
CAS #
3026272-26-1
Related CAS #
Seladelpar;851528-79-5; 928821-40-3 (lysine hydrate); 3026272-26-1 (sodium); 928821-41-4 (lysine)
PubChem CID
132472230
Appearance
White to off-white solid powder
Hydrogen Bond Donor Count
0
Hydrogen Bond Acceptor Count
9
Rotatable Bond Count
11
Heavy Atom Count
31
Complexity
518
Defined Atom Stereocenter Count
1
SMILES
S(C1=CC=C(C(C)=C1)OCC(=O)[O-])C[C@@H](COC1C=CC(C(F)(F)F)=CC=1)OCC.[Na+]
InChi Key
XCAXFCPCOXDEHC-UNTBIKODSA-M
InChi Code
InChI=1S/C21H23F3O5S.Na/c1-3-27-17(11-28-16-6-4-15(5-7-16)21(22,23)24)13-30-18-8-9-19(14(2)10-18)29-12-20(25)26;/h4-10,17H,3,11-13H2,1-2H3,(H,25,26);/q;+1/p-1/t17-;/m1./s1
Chemical Name
sodium 2-[4-[(2R)-2-ethoxy-3-[4-(trifluoromethyl)phenoxy]propyl]sulfanyl-2-methylphenoxy]acetate
Synonyms
Seladelpar sodium salt; 3026272-26-1; MBX-8025 sodium salt; 2751530-13-7; orb573407;
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Note: Please store this product in a sealed and protected environment, avoid exposure to moisture.
Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
DMSO :~50 mg/mL (~107.19 mM)
Solubility (In Vivo)
Solubility in Formulation 1: ≥ 2.5 mg/mL (5.36 mM) (saturation unknown) in 10% DMSO + 40% PEG300 + 5% Tween80 + 45% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 400 μL PEG300 and mix evenly; then add 50 μL Tween-80 to the above solution and mix evenly; then add 450 μL normal saline to adjust the volume to 1 mL.
Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution.

Solubility in Formulation 2: ≥ 2.5 mg/mL (5.36 mM) (saturation unknown) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of 20% SBE-β-CD physiological saline solution and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.

View More

Solubility in Formulation 3: ≥ 2.5 mg/mL (5.36 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of corn oil and mix evenly.


 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 2.1439 mL 10.7193 mL 21.4385 mL
5 mM 0.4288 mL 2.1439 mL 4.2877 mL
10 mM 0.2144 mL 1.0719 mL 2.1439 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration mg/mL;

Method for preparing DMSO stock solution mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Clinical Trial Information
Seladelpar in Subjects With Primary Biliary Cholangitis (PBC)
CTID: NCT03301506
Phase: Phase 3    Status: Recruiting
Date: 2024-11-26
IDEAL: Intended to Determine the Effects of Seladelpar on Normalization of Alkaline Phosphatase Levels in Subjects With Primary Biliary Cholangitis (PBC) and an Incomplete Response or Intolerance to Ursodeoxycholic Acid (UDCA)
CTID: NCT06060665
Phase: Phase 3    Status: Recruiting
Date: 2024-11-22
An Open-Label Study Following Oral Dosing of Seladelpar to Subjects With Primary Biliary Cholangitis (PBC) and Hepatic Impairment (HI)
CTID: NCT04950764
Phase: Phase 1    Status: Recruiting
Date: 2024-11-13
Seladelpar in Subjects With Primary Biliary Cholangitis (PBC) and Compensated Cirrhosis
CTID: NCT06051617
Phase: Phase 3    Status: Recruiting
Date: 2024-11-13
RESPONSE: Response to Seladelpar in
An 8-week, dose ranging, open label, randomized, Phase 2 study with a 44-week extension, to evaluate the safety and efficacy of MBX-8025 in subjects with Primary Biliary Cholangitis (PBC) and an inadequate response to or intolerance to ursodeoxycholic acid (UDCA)
CTID: null
Phase: Phase 2    Status: Completed
Date: 2017-02-21
View More

A 12-week, double-blind, randomized, placebo-controlled, Phase 2 study to evaluate the effects of two doses of MBX-8025 in subjects with Primary Biliary Cirrhosis (PBC) and an inadequate response to ursodeoxycholic acid (UDCA).
CTID: null
Phase: Phase 2    Status: Prematurely Ended, Completed
Date: 2015-11-11


A 12-week, open-label, dose-escalating, phase 2 study to evaluate the effects of MBX-8025 in patients with Homozygous Familial Hypercholesterolemia (HoFH)
CTID: null
Phase: Phase 2    Status: Completed
Date: 2015-04-29

Contact Us