yingweiwo

Prednisolone hemisuccinate

Alias: PREDNISOLONE HEMISUCCINATE; 2920-86-7; prednisolone succinate; Prednisolone 21-hemisuccinate; Prednisolut; Prednisolone bisuccinate; Prednisolone 21-succinate; Prednisolonbisuccinat;
Cat No.:V31049 Purity: ≥98%
Prednisolone hemisuccinate (Prednisolone 21-hemisuccinate) is a synthetic glucocorticoid, an analogue of cortisol, utilized in study/research of a variety of inflammatory and autoimmune diseases.
Prednisolone hemisuccinate
Prednisolone hemisuccinate Chemical Structure CAS No.: 2920-86-7
Product category: New2
This product is for research use only, not for human use. We do not sell to patients.
Size Price Stock Qty
50mg
100mg
250mg
Other Sizes

Other Forms of Prednisolone hemisuccinate:

  • Methylprednisolone-d7
  • Methylprednisolone-d2
  • Methylprednisolone-d4
  • Prednisolone-d8 (prednisolone d8)
  • Prednisolone acetate-d8 (Prednisolone 21-acetate-d8)
  • Prednisolone
  • Prednisolone Phosphate Sodium
  • Methylprednisolone acetate-d6
  • Prednisolone Acetate (Omnipred)
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Product Description
Prednisolone hemisuccinate (Prednisolone 21-hemisuccinate) is a synthetic glucocorticoid, an analogue of cortisol, utilized in study/research of a variety of inflammatory and autoimmune diseases.
Biological Activity I Assay Protocols (From Reference)
Targets
Glucocorticoid receptor
ln Vitro
Resistance or sensitivity to glucocorticoids is considered to be of crucial importance for disease prognosis in childhood acute lymphoblastic leukemia. Prednisolone exerted a delayed biphasic effect on the resistant CCRF-CEM leukemic cell line, necrotic at low doses and apoptotic at higher doses. At low doses, prednisolone exerted a pre-dominant mitogenic effect despite its induction on total cell death, while at higher doses, prednisolone's mitogenic and cell death effects were counterbalanced. Early gene microarray analysis revealed notable differences in 40 genes. The mitogenic/biphasic effects of prednisolone are of clinical importance in the case of resistant leukemic cells. This approach might lead to the identification of gene candidates for future molecular drug targets in combination therapy with glucocorticoids, along with early markers for glucocorticoid resistance [1].
ln Vivo
Results: Both prednisolone and prednisolone sodium succinate (SS)/prednisolone SS were still present in perilymph ∼24 h after the IT administration. Only prednisolone was present in the blood plasma of seven participants (35%). Conclusion: IT injection of prednisolone SS/prednisolone sodium succinate (SS) resulted in high perilymph concentrations of prednisolone and prednisolone SS, which could stay in the perilymph for at least 24 h. Using a mini-endoscope during the IT injection may effectively detect barriers infront of the round window membrane, increasing the drug concentration in the inner ear. Significance: IT injection is an effective method for delivering prednisolone to the inner ear.[4]
Nitric oxide is believed to participate in nonspecific cellular immunity. Gram negative bacterial endotoxins increase the production of reactive nitrogen intermediates (RNI) in phagocytic cells by inducing the enzyme nitric oxide synthase II (NOS II). Anti-inflammatory glucocorticoids attenuate endotoxin-induced increases in RNI. This study evaluated the effect of in vivo administration of prednisolone on Escherichia coli lipopolysaccharide endotoxin (LPS)-induced increases in plasma RNI and neutrophil mRNA for NOS II and production of RNI in the rat. We show that LPS rapidly induces mRNA for NOS II and production of RNI (NO2- and NO3- anion) in rat neutrophils within 2 hr after in vivo administration of a sublethal dose of 0.5 mg/kg, i.v. A pharmacologic dose of prednisolone (50 micrograms/kg, im) given 15 min before LPS-attenuated production of NO2- and NO3- by neutrophils and suppressed LPS-stimulated mRNA for NOS II. 3-Amino, 1,2,4-triazine inhibited NO2- and NO3- production without affecting gene expression for NOS II. These data demonstrate that LPS rapidly induces functional gene expression for NOS II and prednisolone prevents induction of NOS II activity by inhibiting transcription of its mRNA [2].
Diaphragm atrophy and weakness occur after administration of massive doses of corticosteroids for short periods. In the present study the effects of prolonged administration of moderate doses of fluorinated and nonfluorinated steroids were investigated on contractile properties and histopathology of rat diaphragm. 60 rats received saline, 1.0 mg/kg triamcinolone, or 1.25 or 5 mg/kg i.m. prednisolone daily for 4 wk. Respiratory and peripheral muscle mass increased similarly in control and both prednisolone groups, whereas triamcinolone caused severe muscle wasting. Maximal tetanic tension averaged 2.23 +/- 0.54 kg/cm2 (SD) in the control group. An increased number of diaphragmatic bundles in the 5-mg/kg prednisolone group generated maximal tetanic tensions < 2.0 kg/cm2 (P < 0.05). In addition, fatigability during the force-frequency protocol was most pronounced in this group (P < 0.05). In contrast, triamcinolone caused a prolonged half-relaxation time and a leftward shift of the force-frequency curve (P < 0.05). Histological examination of the diaphragm showed a normal pattern in the control and 1.25-mg/kg prednisolone group. Myogenic changes, however, were found in the 5-mg/kg prednisolone group and, more pronounced, in the triamcinolone group. Selective type IIb fiber atrophy was found in the latter group, but not in the prednisolone groups. In conclusion, triamcinolone induced type IIb fiber atrophy, resulting in reduced respiratory muscle strength and a leftward shift of the force-frequency curve. In contrast, 5 mg/kg prednisolone caused alterations in diaphragmatic contractile properties and histological changes without fiber atrophy [3].
Cell Assay
Prednisolone treatment [1]
Concentrations of Prednisolone were selected on the basis of the average in vivo dosage administrated intravenously to children at ages between 1 month and 12 years old (details in supplementary data, file: CCRFCEM Cytotoxixity Assay.xls). Also, bioactivity in cortisol equivalents is estimated to be in the range of 40–200 nM. To ensure that the study covers these ranges, prednisolone was diluted to the following 12 concentrations: control, 10 nM, 100 nM, 1 μM, 5.5 μM, 11 μM, 22 μM, 44 μM, 88 μM, 175 μM, 350 μM, and 700 μM.
Cell proliferation assay Cell population counts were determined with the use of a NIHON KOHDEN CellTaq-α hematology analyzer. Cells were counted at the −24 h time point as well as 0 h, 4 h, 24 h, 48 h, and 72 h after initiation of exposure to prednisolone. For this purpose, 200 μl of cell suspensions were obtained from each flask and counted directly with the analyzer.
Protein extraction and Western blotting [1]
Cells were harvested after 1 h and 4 h exposure to different concentrations of Prednisolone. Protein extraction and Western blotting were performed as previously described. Total protein content was determined by the Bradford method using bovine serum albumin as a standard. Proteins were separated by SDS-PAGE and Western blotting was carried out, with anti-p65 antibodies
Microarray analysis [1]
cDNA microarray chips (1200 genes) were obtained from TAKARA (Human Cancer Chip v.40). Hybridization was performed with the CyScribe Post-Labeling kit as described by the manufacturer, utilizing the Cy3 and Cy5 fluorescent dyes. Slides were scanned with a microarray scanner. Images were generated with ScanArray microarray acquisition software. cDNAs from three experimental setups were used, each one consisting of three independent experiments. The experimental setups consisted of the three following pairs: control vs. 10 nM Prednisolone (designated as 0vs1), 10 nM prednisolone vs. 700 μM prednisolone (designated as 1vs3), control vs. 700 μM prednisolone (designated as 0vs3). This is a ‘simple loop’ experimental design, taking into account all possible combinations between samples, as previously described. Raw microarray data are available as supplementary data.
Real-time reverse transcription PCR (qRT-PCR) [1]
The GRIM19 (NDUFA13) gene was tested from three samples control, 10 nM and 700 μM Prednisolone at 4 h and 48 h treatment, using the one-step Plexor™ qRT-PCR kit. The set of primers was designed using the on-line tool Plexor™ Primer Design System v1.2 by Promega
Animal Protocol
Study design, animals, and treatment [3]
60 adult male Wistar rats, aged 14 wk, weighing 350-400 g, were randomized in quadruplets, into one of four treatment groups: control (C), saline, 0.05 ml/d i.m.; low dose prednisolone (LD), 1.25 mg/kg per d i.m.; high dose prednisolone (HD), 5 mg/kg per d i.m.; or triamcinolone-diacetate (TR), 1 mg/kg per d i.m. Dilution of medication was performed such that with each injection all animals received a similar volume (0.05 ml). During 4 wk the animals were injected daily in the left hindlimb. They were fed ad libitum and weighed twice weekly. After the treatment period, contractile properties, histological, and histochemical characteristics of the diaphragm were examined.[3]
Background: The use of intratympanic (IT) steroids has drastically increased over the past 10-15 years to manage many otological pathologies.
Objectives: This study aimed to compare the concentrations of prednisolone and prednisolone sodium succinate (SS) in the plasma and inner ear perilymph of participants who underwent cochlear implantation 24 h after IT injection.
Materials and methods: It was a prospective comparative randomized study. Twenty participants received an IT injection of prednisolone SS ∼24 h before the cochlear implantation. The other five participants received an IT saline injection and represented the control group. Perilymph and blood were sampled during the cochlear implantation surgery.[4]
References

[1]. Prednisolone exerts late mitogenic and biphasic effects on resistant acute lymphoblastic leukemia cells: Relation to early gene expression. Leuk Res, 2009. 33(12): p. 1684-95.

[2]. Rapid induction of messenger RNA for nitric oxide synthase II in rat neutrophils in vivo by endotoxin and its suppression by prednisolone. Proc Soc Exp Biol Med. 1994 Mar;205(3):220-9.

[3]. Triamcinolone and prednisolone affect contractile properties and histopathology of rat diaphragm differently. J Clin Invest. 1993 Sep;92(3):1534-42.

[4]. Evaluation of prednisolone and prednisolone sodium succinate concentrations in human plasma and inner ear perilymph during cochlear implantation 24 h after intratympanic injection. Acta Otolaryngol. 2022 Sep-Dec;142(9-12):658-663.

Additional Infomation
Prednisolone succinate is a hemisuccinate resulting from the formal condensation of the 21-hydroxy group prednisolone with one of the carboxy groups of succinic acid. It is used to treat mild to moderate non-infectious eye allergies and inflammation, including damage caused by chemical and thermal burns. It has a role as an anti-inflammatory drug. It is a hemisuccinate, an 11beta-hydroxy steroid, a 17alpha-hydroxy steroid, a 20-oxo steroid, a 3-oxo-Delta(1),Delta(4)-steroid and a tertiary alpha-hydroxy ketone. It is functionally related to a prednisolone and a succinic acid. It is a conjugate acid of a prednisolone succinate(1-).
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C25H32O8
Molecular Weight
460.51678
Exact Mass
460.21
CAS #
2920-86-7
Related CAS #
Prednisolone;50-24-8;Prednisolone disodium phosphate;125-02-0;Prednisolone acetate;52-21-1
PubChem CID
656804
Appearance
White to off-white solid powder
Density
0,86 g/cm3
Boiling Point
358 °C400 mm Hg(lit.)
Melting Point
28-32 °C(lit.)
Flash Point
265°C/15mm
Vapour Pressure
0mmHg at 25°C
Index of Refraction
1.6
LogP
1.973
Hydrogen Bond Donor Count
3
Hydrogen Bond Acceptor Count
8
Rotatable Bond Count
7
Heavy Atom Count
33
Complexity
950
Defined Atom Stereocenter Count
7
SMILES
C[C@]12C[C@@H]([C@H]3[C@H]([C@@H]1CC[C@@]2(C(=O)COC(=O)CCC(=O)O)O)CCC4=CC(=O)C=C[C@]34C)O
InChi Key
APGDTXUMTIZLCJ-CGVGKPPMSA-N
InChi Code
InChI=1S/C25H32O8/c1-23-9-7-15(26)11-14(23)3-4-16-17-8-10-25(32,24(17,2)12-18(27)22(16)23)19(28)13-33-21(31)6-5-20(29)30/h7,9,11,16-18,22,27,32H,3-6,8,10,12-13H2,1-2H3,(H,29,30)/t16-,17-,18-,22+,23-,24-,25-/m0/s1
Chemical Name
4-[2-[(8S,9S,10R,11S,13S,14S,17R)-11,17-dihydroxy-10,13-dimethyl-3-oxo-7,8,9,11,12,14,15,16-octahydro-6H-cyclopenta[a]phenanthren-17-yl]-2-oxoethoxy]-4-oxobutanoic acid
Synonyms
PREDNISOLONE HEMISUCCINATE; 2920-86-7; prednisolone succinate; Prednisolone 21-hemisuccinate; Prednisolut; Prednisolone bisuccinate; Prednisolone 21-succinate; Prednisolonbisuccinat;
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
DMSO : ~250 mg/mL (~542.86 mM)
Solubility (In Vivo)
Solubility in Formulation 1: ≥ 2.08 mg/mL (4.52 mM) (saturation unknown) in 10% DMSO + 40% PEG300 + 5% Tween80 + 45% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 20.8 mg/mL clear DMSO stock solution to 400 μL PEG300 and mix evenly; then add 50 μL Tween-80 to the above solution and mix evenly; then add 450 μL normal saline to adjust the volume to 1 mL.
Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution.

Solubility in Formulation 2: ≥ 2.08 mg/mL (4.52 mM) (saturation unknown) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 20.8 mg/mL clear DMSO stock solution to 900 μL of 20% SBE-β-CD physiological saline solution and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.

View More

Solubility in Formulation 3: ≥ 2.08 mg/mL (4.52 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 20.8 mg/mL clear DMSO stock solution to 900 μL of corn oil and mix evenly.


 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 2.1715 mL 10.8573 mL 21.7146 mL
5 mM 0.4343 mL 2.1715 mL 4.3429 mL
10 mM 0.2171 mL 1.0857 mL 2.1715 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration mg/mL;

Method for preparing DMSO stock solution mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Clinical Trial Information
Angiotensin Converting Enzyme Inhibitor (ACE) Induced Angioedema
EudraCT: 2012-001670-28
Phase: Phase 3
Status: Prematurely Ended
Date: 2013-03-18
Contact Us