Flumatinib (HHGV-678)

Alias: HHGV678; HHGV 678; HHGV-678; HH-GV-678
Cat No.:V3405 Purity: ≥98%
Flumatinib (HHGV-678; HHGV678; Hansoh Xinfu), the first approved 2nd generation TKI in China and an imatinib derivative, is a potent multi-kinase inhibitor with anticancer activity.
Flumatinib (HHGV-678) Chemical Structure CAS No.: 895519-90-1
Product category: Bcr-Abl
This product is for research use only, not for human use. We do not sell to patients.
Size Price Stock Qty
5mg
10mg
25mg
50mg
100mg
250mg
500mg
Other Sizes

Other Forms of Flumatinib (HHGV-678):

  • Flumatinib mesylate (HHGV-678)
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Top Publications Citing lnvivochem Products
Purity & Quality Control Documentation

Purity: ≥98%

Product Description

Flumatinib (HHGV-678; HHGV678; Hansoh Xinfu), the first approved 2nd generation TKI in China and an imatinib derivative, is a potent multi-kinase inhibitor with anticancer activity. It has IC50 values of 1.2 nM, 307.6 nM, and 2662 nM for c-Abl, PDGFRβ, and c-Kit inhibition, respectively. It functions as a BCR-ABL/PDGFR/KIT selective inhibitor, basically. Some KIT mutants with activation loop mutations (D820G, N822K, Y823D, and A829P) were successfully treated with flumatinib to overcome their drug resistance. Studies conducted in vivo have consistently indicated that flumatinib is more effective than imatinib or sunitinib in treating 32D cells that have the secondary mutation Y823D. Clinical trials for flumatinib are presently taking place in Phase I/II settings to treat chronic myelogenous leukemia (CML).

Biological Activity I Assay Protocols (From Reference)
Targets
c-Abl (IC50 = 1.2 nM); PDGFRβ (IC50 = 307.6 nM); c-Kit (IC50 = 2662 nM)
ln Vitro

Flumatinib (HH-GV-678) can primarily inhibit Bcr-Abl'sautophosphorylation in K562 cell. At greater concentrations, flumatinib can prevent the phosphorylation of PDGFR in Swiss3T3 cells and c-Kit in Mo7e cells; however, it has little to no effect on EGFR, KDR, c-Src, and HER2 tyrosine kinases [1]. Drug resistance in some KIT mutants with activation loop mutations (D820G, N822K, Y823D, and A829P) was successfully overcome by flumatinib (HHGV678)[2].

ln Vivo
Female Balb/cA-nu/nu mice, six weeks old and weighing 17–19 g each, were acquired from Shanghai SLAC Laboratory Animal Co., Ltd. (Shanghai, China) and raised in a particular environment free of pathogens. One million KIT mutant transformed 32D cells were injected subcutaneously (s.c.) into the right flank of each mouse. For the next 14 days, mice were divided into groups based on randomization (n = 8–10 per group) and given oral gavage treatments with vehicle, imatinib, flumatinib, or sunitinib.
Enzyme Assay
Retroviral constructs based on murine stem cell viruses that carried either activating mutant D816V (816 Asp→Val) KIT cDNA or murine–human hybrid WT KIT cDNA were kindly provided by Michael H. Tomasson (Washington University School of Medicine, St. Louis, MO, USA). The intracellular region of human KIT was fused in-frame with the extracellular and transmembrane regions of murine KIT to create hybrid KIT alleles. It has been demonstrated that substituting homologous murine sequences for the human extracellular and transmembrane domains of KIT can increase the expression efficiency and preserve the capacity to transform some KIT mutants in murine cells. The enhanced GFP cassette from the downstream internal ribosomal entry site causes KIT alleles to coexpress with enhanced GFP. In accordance with Molecular Cloning's third edition of Protocol 3, mutagenesis, the KIT point mutations were produced. Mutagenic primers were created to avoid the deleted sequence in insertion mutagenesis and to harbor the deleted sequence in deletion mutagenesis, respectively. Primestar Hot Start DNA polymerase (Takara, Dalian, China) with high fidelity was used in all of the PCRs mentioned above. Takara was also the source of additional enzymes used in the aforementioned experiments. By using direct sequencing, the sequences of every mutant in this study were confirmed.
Cell Assay
In triplicate, cells (5 × 103) were incubated with different concentrations of imatinib, flumatinib, or sunitinib in 96-well plates for 72 hours, using 200 μL medium containing or lacking IL-3. The cells were incubated for 4 hours after we added MTT. The insoluble purple formazan product was dissolved into a colored solution by adding a solubilization solution, which is a solution of the detergent SDS in diluted hydrochloric acid. A spectrophotometer was used to measure the absorbance of this colored solution at 570 nm using a 650 nm reference filter. The ratio of average absorbance in drug-treated wells to no-drug controls was used to plot growth inhibition. GraphPad Prism version 5, a program for curve-fitting, was used to determine the IC50 values.
Animal Protocol
75mg/kg; Oral gavage
Six-week-old female Balb/cA-nu/nu mice weighing 17–19 g bearing 32D-V559D or 32D-V559D+Y823D tumors
References

[1]. HH-GV-678, a novel selective inhibitor of Bcr-Abl, outperforms imatinib and effectively overrides imatinib resistance. Leukemia. 2010 Oct;24(10):1807-9.

[2]. Flumatinib, a selective inhibitor of BCR-ABL/PDGFR/KIT, effectively overcomes drug resistance of certain KIT mutants. Cancer Sci. 2013 Nov 10.

[3]. Metabolism of flumatinib, a novel antineoplastic tyrosine kinase inhibitor, in chronic myelogenous leukemia patients. Drug Metab Dispos. 2010 Aug;38(8):1328-40.

These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C29H29F3N8O
Molecular Weight
562.59
Exact Mass
562.24
Elemental Analysis
C, 61.91; H, 5.20; F, 10.13; N, 19.92; O, 2.84
CAS #
895519-90-1
Related CAS #
Flumatinib mesylate;895519-91-2;Flumatinib-d3
Appearance
Solid powder
SMILES
CC1=C(C=C(C=N1)NC(=O)C2=CC(=C(C=C2)CN3CCN(CC3)C)C(F)(F)F)NC4=NC=CC(=N4)C5=CN=CC=C5
InChi Key
BJCJYEYYYGBROF-UHFFFAOYSA-N
InChi Code
InChI=1S/C29H29F3N8O/c1-19-26(38-28-34-9-7-25(37-28)21-4-3-8-33-16-21)15-23(17-35-19)36-27(41)20-5-6-22(24(14-20)29(30,31)32)18-40-12-10-39(2)11-13-40/h3-9,14-17H,10-13,18H2,1-2H3,(H,36,41)(H,34,37,38)
Chemical Name
4-[(4-methylpiperazin-1-yl)methyl]-N-[6-methyl-5-[(4-pyridin-3-ylpyrimidin-2-yl)amino]pyridin-3-yl]-3-(trifluoromethyl)benzamide
Synonyms
HHGV678; HHGV 678; HHGV-678; HH-GV-678
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
DMSO: ≥ 32 mg/mL
Water: N/A
Ethanol: N/A
Solubility (In Vivo)
Solubility in Formulation 1: ≥ 2.08 mg/mL (3.70 mM) (saturation unknown) in 10% DMSO + 40% PEG300 + 5% Tween80 + 45% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 20.8 mg/mL clear DMSO stock solution to 400 μL PEG300 and mix evenly; then add 50 μL Tween-80 to the above solution and mix evenly; then add 450 μL normal saline to adjust the volume to 1 mL.
Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution.

Solubility in Formulation 2: ≥ 2.08 mg/mL (3.70 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 20.8 mg/mL clear DMSO stock solution to 900 μL of corn oil and mix evenly.

 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 1.7775 mL 8.8875 mL 17.7749 mL
5 mM 0.3555 mL 1.7775 mL 3.5550 mL
10 mM 0.1777 mL 0.8887 mL 1.7775 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration mg/mL;

Method for preparing DMSO stock solution mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Clinical Trial Information
NCT Number Recruitment interventions Conditions Sponsor/Collaborators Start Date Phases
NCT04677439 Recruiting Drug: Flumatinib Flumatinib
Imatinib
Shenzhen Second People's Hospital January 1, 2021 Phase 4
NCT05353205 Recruiting Drug: Flumatinib mesylate
tablets (400mg)
Drug: Flumatinib mesylate
tablets (600mg)
CML, Chronic Phase Jiangsu Hansoh Pharmaceutical Co., Ltd. December 2013 Phase 4
NCT05071482 Recruiting Drug: Flumatinib
Drug: Imatinib
Acute Leukemia wang, jianxiang September 16, 2021 Phase 4
NCT05433532 Recruiting Drug: Flumatinib
Drug: Venetoclax
Acute Myeloid Leukemia
Chronic Myeloid Leukemia
The First Affiliated Hospital
of Soochow University
May 1, 2022 Phase 2
NCT05367765 Completed Drug: Flumatinib
Drug: Imatinib
CML, Chronic Phase Jiangsu Hansoh Pharmaceutical
Co., Ltd.
April 30, 2022 Phase 4
Biological Data
  • Flumatinib


    KIT mutants, downstream signaling effectors ERK1/2, and signal transducer and activator of transcription-3 (STAT3), are constitutively phosphorylated in transformed 32D cell lines.2014 Jan;105(1):117-25.

  • Flumatinib


    Effects of imatinib, flumatinib, and sunitinib on the phosphorylation of KIT, ERK1/2, and signal transducer and activator of transcription-3 (STAT3) in 32D-V559D (a) and 32D-V559D+Y823D (b) cells.2014 Jan;105(1):117-25.

  • Flumatinib


    Molecular modeling of the interactions between flumatinib and KIT kinase domain. (a) Structures of imatinib and flumatinib. (b) Molecular docking model of the KIT/flumatinib complex.2014 Jan;105(1):117-25.

  • Flumatinib


    In vivoeffects of imatinib, flumatinib, and sunitinib on the survival of mice after s.c. injection of 32D-V559D (a) or 32D-V559D+Y823D (b) cells.2014 Jan;105(1):117-25.

  • Flumatinib


    Pharmacokinetic (PK) and pharmacodynamic properties of imatinib, flumatinib, and sunitinib. Mice bearing 32D-V559D+Y823D tumors received a single dose of 150mg/kg imatinib, 75mg/kg flumatinib, or 50mg/kg sunitinib.2014 Jan;105(1):117-25.

Contact Us Back to top