| Size | Price | Stock | Qty |
|---|---|---|---|
| 10mg |
|
||
| 25mg |
|
||
| 50mg |
|
||
| 100mg |
|
||
| 250mg |
|
||
| 500mg |
|
||
| Other Sizes |
|
Timosaponin BII (TB-II) is a steroidal saponin-based antioxidant and an anti-inflammatory agent isolated from Anemarrhenae with diverse biological activities, e.g. neuronal protective, anti-inflammatory and antioxidant activities.
| ln Vitro |
With an IC50 value of 15.5 μg/mL in HL-60 cells, timosaponin BII, a steroidal glycoside isolated from Anemarrhenae, was found to be effective against human cancer cell lines, including HT-29 (colon), HepG2 and Bel-7402 (liver), HL-60 (leukemia), and MDA-MB-468 (breast cancer)[1].
|
|---|---|
| ln Vivo |
Rats in both the vehicle control group and the model group had considerably higher levels of BACE1 expression in their retinas. Aβ1-40, β-CTF, and malondialdehyde (MDA) all rose at the same period. In contrast to the vehicle control group, the retinas from the tiemaponin-BII treated group exhibited considerably lower levels of BACE1 and collected less Aβ1-40 or β-CTF. Additionally, a notable reduction in MDA levels and an elevation in partial thromboplastin time are seen [2].
|
| References | |
| Additional Infomation |
Melongoside N is a steroid saponin.
Officinalisinin I has been reported in Solanum melongena with data available. |
| Molecular Formula |
C45H76O19
|
|---|---|
| Molecular Weight |
921.0736
|
| Exact Mass |
920.498
|
| CAS # |
136656-07-0
|
| PubChem CID |
4483043
|
| Appearance |
White to off-white solid powder
|
| Density |
1.5±0.1 g/cm3
|
| Boiling Point |
1033.6±65.0 °C at 760 mmHg
|
| Melting Point |
187 - 189 °C
|
| Flash Point |
578.9±34.3 °C
|
| Vapour Pressure |
0.0±0.6 mmHg at 25°C
|
| Index of Refraction |
1.627
|
| LogP |
0.34
|
| Hydrogen Bond Donor Count |
12
|
| Hydrogen Bond Acceptor Count |
19
|
| Rotatable Bond Count |
13
|
| Heavy Atom Count |
64
|
| Complexity |
1560
|
| Defined Atom Stereocenter Count |
0
|
| InChi Key |
SORUXVRKWOHYEO-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C45H76O19/c1-19(18-58-40-37(55)34(52)31(49)27(15-46)60-40)7-12-45(57)20(2)30-26(64-45)14-25-23-6-5-21-13-22(8-10-43(21,3)24(23)9-11-44(25,30)4)59-42-39(36(54)33(51)29(17-48)62-42)63-41-38(56)35(53)32(50)28(16-47)61-41/h19-42,46-57H,5-18H2,1-4H3
|
| Chemical Name |
2-[4-[16-[4,5-dihydroxy-6-(hydroxymethyl)-3-[3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]oxyoxan-2-yl]oxy-6-hydroxy-7,9,13-trimethyl-5-oxapentacyclo[10.8.0.02,9.04,8.013,18]icosan-6-yl]-2-methylbutoxy]-6-(hydroxymethyl)oxane-3,4,5-triol
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
H2O : ~100 mg/mL (~108.57 mM)
DMSO : ~100 mg/mL (~108.57 mM) |
|---|---|
| Solubility (In Vivo) |
Solubility in Formulation 1: ≥ 2.5 mg/mL (2.71 mM) (saturation unknown) in 10% DMSO + 40% PEG300 + 5% Tween80 + 45% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 400 μL PEG300 and mix evenly; then add 50 μL Tween-80 to the above solution and mix evenly; then add 450 μL normal saline to adjust the volume to 1 mL. Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution. Solubility in Formulation 2: ≥ 2.5 mg/mL (2.71 mM) (saturation unknown) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), clear solution. For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of 20% SBE-β-CD physiological saline solution and mix evenly. Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. View More
Solubility in Formulation 3: ≥ 2.5 mg/mL (2.71 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution. Solubility in Formulation 4: 50 mg/mL (54.28 mM) in PBS (add these co-solvents sequentially from left to right, and one by one), clear solution; with ultrasonication. |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.0857 mL | 5.4285 mL | 10.8569 mL | |
| 5 mM | 0.2171 mL | 1.0857 mL | 2.1714 mL | |
| 10 mM | 0.1086 mL | 0.5428 mL | 1.0857 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
