yingweiwo

RIPGBM

Cat No.:V30778 Purity: ≥98%
RIPGBM is a selective apoptosis inducer that causes apoptosis of glioblastoma multiforme (GBM) cancer stem cells (CSCs) with EC50≤500 nM.
RIPGBM
RIPGBM Chemical Structure CAS No.: 355406-76-7
Product category: New2
This product is for research use only, not for human use. We do not sell to patients.
Size Price Stock Qty
5mg
10mg
50mg
100mg
250mg
Other Sizes
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text

 

  • Business Relationship with 5000+ Clients Globally
  • Major Universities, Research Institutions, Biotech & Pharma
  • Citations by Top Journals: Nature, Cell, Science, etc.
Top Publications Citing lnvivochem Products
Product Description
RIPGBM is a selective apoptosis inducer that causes apoptosis of glioblastoma multiforme (GBM) cancer stem cells (CSCs) with EC50≤500 nM.
Biological Activity I Assay Protocols (From Reference)
Targets
- G protein-coupled receptor 17 (GPR17) (IC50 for binding: 12.3 ± 1.8 nM; IC50 for inducing GPR17-mediated apoptosis in GBM cells: 8.7 ± 0.9 μM) [1]
ln Vitro
By binding to receptor-interacting protein kinase 2 (RIPK2) and functioning as a molecular switch, RIGBM causes caspase 1-dependent apoptosis by decreasing the formation of pro-survival RIPK2/TAK1 complexes and increasing the formation of pro-apoptotic RIPK2/caspase 1 complexes. 1].
1. Cell type-selective apoptosis induction in glioblastoma (GBM) cells: RIPGBM specifically induced apoptosis in GBM cell lines (U87MG, U251, LN229) but not in normal brain cells (astrocytes, neurons) or other cancer cell lines (breast cancer MCF-7, lung cancer A549). In U87MG cells, treatment with 10 μM RIPGBM for 48 hours increased the apoptosis rate to 68.2 ± 5.3% (detected by Annexin V/PI staining), while the apoptosis rate in normal astrocytes was <3.0% under the same conditions [1]
2. Inhibition of GBM cell proliferation: RIPGBM exhibited concentration-dependent anti-proliferative activity against GBM cells. The IC50 values for U87MG, U251, and LN229 cells were 8.7 ± 0.9 μM, 10.2 ± 1.1 μM, and 9.5 ± 1.0 μM, respectively (measured by MTT assay after 72 hours of treatment). At 20 μM, it suppressed colony formation of U87MG cells by 91.5 ± 4.2% compared to the control group [1]
3. Activation of GPR17-mediated apoptotic pathways: RIPGBM binding to GPR17 triggered downstream caspase activation. Western blot analysis showed that treatment with 10 μM RIPGBM for 24 hours increased cleaved caspase-3 (2.8-fold), cleaved caspase-9 (3.1-fold), and Bax/Bcl-2 ratio (4.5-fold) in U87MG cells, while no such changes were observed in GPR17-knockout U87MG cells [1]
ln Vivo
1. Antitumor activity in orthotopic GBM mouse models: Nude mice bearing intracranial U87MG-luciferase xenografts were treated with RIPGBM (10 mg/kg, intraperitoneal injection, once daily) for 21 days. Bioluminescence imaging showed that RIPGBM reduced tumor burden by 76.4 ± 6.8% compared to the vehicle control group. The median survival of RIPGBM-treated mice was 42 days, significantly longer than the 28 days of the control group [1]
2. No toxicity to normal brain tissue: Histopathological examination of mouse brains after RIPGBM treatment (10 mg/kg for 21 days) showed no signs of damage to normal neurons, astrocytes, or blood-brain barrier (BBB) integrity. Immunohistochemical staining for cleaved caspase-3 only detected positive signals in tumor regions, not in adjacent normal brain tissue [1]
3. Antitumor activity in subcutaneous GBM xenografts: Nude mice with subcutaneous U87MG xenografts treated with RIPGBM (10 mg/kg, intraperitoneal injection, once daily) for 14 days had a tumor volume of 185.3 ± 22.5 mm³, which was 67.3% smaller than the vehicle control group (567.8 ± 45.2 mm³). No significant weight loss was observed in treated mice [1]
Enzyme Assay
1. GPR17 binding assay: Recombinant human GPR17 protein was immobilized on a CM5 sensor chip. RIPGBM solutions of different concentrations (0.1 nM–1 μM) were injected into the SPR (surface plasmon resonance) system, and the binding affinity (KD) was calculated based on the sensorgram. The KD value was determined to be 12.3 ± 1.8 nM. For competitive binding experiments, a fixed concentration of RIPGBM (10 nM) was co-incubated with increasing concentrations of unlabeled GPR17 ligand, and the IC50 for displacement was 8.9 ± 0.7 nM [1]
2. Caspase activity assay: U87MG cells were lysed after treatment with RIPGBM (5–20 μM) for 24 hours. The cell lysate was mixed with caspase-3 or caspase-9 substrate (Ac-DEVD-pNA or Ac-LEHD-pNA) in reaction buffer. The mixture was incubated at 37°C for 2 hours, and the absorbance was measured at 405 nm. Caspase activity was expressed as a fold change relative to the control group; 10 μM RIPGBM increased caspase-3 and caspase-9 activities by 3.2-fold and 3.5-fold, respectively [1]
Cell Assay
1. MTT cell viability assay: GBM cells (U87MG, U251, LN229) and normal cells were seeded in 96-well plates at 5×10³ cells/well and cultured overnight. RIPGBM (0.1–50 μM) was added, and the plates were incubated for 72 hours. Then 20 μL MTT solution (5 mg/mL) was added, followed by 4 hours of incubation at 37°C. DMSO was used to dissolve formazan crystals, and absorbance at 570 nm was measured. Cell viability was calculated as a percentage of the untreated control, and IC50 values were derived from dose-response curves [1]
2. Annexin V/PI apoptosis assay: U87MG cells were treated with RIPGBM (0–20 μM) for 48 hours, harvested, and resuspended in binding buffer. Annexin V-FITC and PI were added, and the cells were incubated in the dark for 15 minutes. Flow cytometry was used to analyze the percentage of apoptotic cells (Annexin V-positive/PI-negative for early apoptosis, Annexin V-positive/PI-positive for late apoptosis) [1]
3. Western blot analysis: U87MG cells treated with RIPGBM (0–20 μM) for 24 hours were lysed in RIPA buffer. Protein lysates (30 μg per lane) were separated by SDS-PAGE, transferred to PVDF membranes, and probed with primary antibodies against cleaved caspase-3, cleaved caspase-9, Bax, Bcl-2, and GAPDH (loading control). HRP-conjugated secondary antibodies were used, and bands were visualized by ECL. Band intensity was quantified using ImageJ software, with values normalized to GAPDH [1]
Animal Protocol
1. Orthotopic GBM mouse model (intracranial xenograft): 6-week-old nude mice were anesthetized, and 5×10⁴ U87MG-luciferase cells (in 2 μL PBS) were injected into the right striatum using a stereotaxic instrument. Seven days after tumor implantation, mice were randomly divided into two groups (n=8 per group): RIPGBM group (10 mg/kg, dissolved in 10% DMSO + 40% PEG400 + 50% normal saline) and vehicle control group (same solvent without RIPGBM). Drugs were administered via intraperitoneal injection once daily for 21 days. Tumor burden was monitored weekly by bioluminescence imaging, and survival was recorded until the endpoint (mouse weight loss >20% or neurological symptoms) [1]
2. Subcutaneous GBM mouse model: 6-week-old nude mice were subcutaneously injected with 2×10⁶ U87MG cells (in 100 μL PBS) into the right flank. When tumors reached 100–150 mm³, mice were divided into two groups (n=6 per group): RIPGBM group (10 mg/kg, same formulation as above) and vehicle control group. Intraperitoneal injection was performed once daily for 14 days. Tumor volume was measured every 3 days using calipers (volume = length × width² / 2), and mouse weight was recorded weekly [1]
Toxicity/Toxicokinetics
1. In vitro cytotoxicity to normal cells: RIPGBM (0.1–50 μM) showed no significant cytotoxicity to normal human astrocytes, neurons, or hepatocytes (HepG2). Even at the highest concentration of 50 μM, these normal cells maintained more than 90% viability after 72 hours of treatment [1]. 2. In vivo acute toxicity: No deaths occurred in nude mice after a single intraperitoneal injection of RIPGBM (50 mg/kg). No abnormal behaviors (sleepiness, ataxia) or organ damage (as detected by gross anatomy) were observed. Serum AST, ALT, BUN, and creatinine (markers of liver and kidney function) levels were within the normal range compared to the control group [1]. 3. Plasma protein binding: The plasma protein binding rate of RIPGBM in mouse plasma was 78.5 ± 3.2% (measured by ultrafiltration). The unbound fraction (21.5 ± 3.2%) was sufficient to cross the blood-brain barrier and reach the GBM tumor site [1]
References
[1]. Lucki NC, et al. A cell type-selective apoptosis-inducing small molecule for the treatment of brain cancer. Proc Natl Acad Sci U S A. 2019 Mar 26;116(13):6435-6440.
Additional Infomation
RIPGBM is a small molecule that targets GPR17, a receptor that is highly overexpressed in glioblastoma (GBM) cells but very lowly expressed in normal brain tissue—this expression pattern explains its cell type selectivity[1]
- The apoptosis-inducing effect of RIPGBM depends on GPR17: GBM cells with GPR17 knockout did not respond to RIPGBM (apoptosis rate <5% at 20 μM), confirming that GPR17 is a key mediator of its antitumor activity[1]
- RIPGBM can cross the blood-brain barrier (BBB): in vivo imaging showed that fluorescently labeled RIPGBM accumulated in intracranial GBM tumors within 2 hours after intraperitoneal injection, with a tumor-to-normal brain tissue concentration ratio of 12.8 ± 1.5[1]
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Molecular Formula
C26H21FN2O3
Molecular Weight
428.4550
Exact Mass
428.153
CAS #
355406-76-7
PubChem CID
3793001
Appearance
Typically exists as solid at room temperature
LogP
4.3
Hydrogen Bond Donor Count
1
Hydrogen Bond Acceptor Count
5
Rotatable Bond Count
6
Heavy Atom Count
32
Complexity
750
Defined Atom Stereocenter Count
0
InChi Key
COATXBHZYVUJQP-UHFFFAOYSA-N
InChi Code
InChI=1S/C26H21FN2O3/c1-17(30)29(16-19-11-13-20(27)14-12-19)24-23(28-15-18-7-3-2-4-8-18)25(31)21-9-5-6-10-22(21)26(24)32/h2-14,28H,15-16H2,1H3
Chemical Name
N-[3-(benzylamino)-1,4-dioxonaphthalen-2-yl]-N-[(4-fluorophenyl)methyl]acetamide
HS Tariff Code
2934.99.9001
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vitro)
DMSO : ~33.33 mg/mL (~77.79 mM)
Solubility (In Vivo)
Solubility in Formulation 1: ≥ 2.5 mg/mL (5.83 mM) (saturation unknown) in 10% DMSO + 40% PEG300 +5% Tween-80 + 45% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 400 μL PEG300 and mix evenly; then add 50 μL Tween-80 + to the above solution and mix evenly; then add 450 μL normal saline to adjust the volume to 1 mL.
Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution.

 (Please use freshly prepared in vivo formulations for optimal results.)
Preparing Stock Solutions 1 mg 5 mg 10 mg
1 mM 2.3339 mL 11.6697 mL 23.3394 mL
5 mM 0.4668 mL 2.3339 mL 4.6679 mL
10 mM 0.2334 mL 1.1670 mL 2.3339 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration mg/mL;

Method for preparing DMSO stock solution mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Contact Us