| Size | Price | Stock | Qty |
|---|---|---|---|
| 1g |
|
||
| Other Sizes |
| Targets |
Insect olfactory receptors.
|
|---|---|
| ln Vitro |
2-Undecanol is a component of insect pheromones and is used in studies of insect behavior. It may interact with olfactory receptors in insects, eliciting behavioral responses. The compound has antimicrobial and antifungal properties. It is used as a flavor and fragrance ingredient.
|
| ln Vivo |
In vivo studies of 2-undecanol are primarily related to its role in insect pheromone communication. It is used in behavioral assays to study insect attraction, repulsion, or aggregation. The compound may also have antimicrobial effects in vivo.
|
| Enzyme Assay |
Pheromone activity is assessed using behavioral assays in insects, such as wind tunnel or olfactometer studies. Electroantennogram (EAG) assays measure the electrical response of insect antennae to the compound. Antimicrobial activity is assessed by broth microdilution for MIC determination.
|
| Cell Assay |
Cell-based assays for 2-undecanol are limited. For studying its effects on olfactory receptors, insect cell lines expressing these receptors can be used in calcium imaging or electrophysiology studies.
|
| Animal Protocol |
In vivo studies are conducted in insects for behavioral assays. The compound is used in pest management research to study insect communication and develop attractants or repellents.
|
| ADME/Pharmacokinetics |
2-Undecanol is a volatile compound used in the flavor and fragrance industry. It is soluble in organic solvents. Standard laboratory storage conditions apply.
|
| Toxicity/Toxicokinetics |
2-Undecanol has low toxicity and is generally recognized as safe for use in flavors and fragrances. Standard laboratory safety practices should be followed when handling this compound.
|
| References | |
| Additional Infomation |
Undecane-2-ol is a secondary alcohol formed by replacing undecane with a hydroxyl group at the 2-position. It is a plant metabolite, flavoring agent, volatile oil component, pheromone, and animal metabolite. It is both undecaneol and a secondary alcohol. It has been reported to be detected in Tulafrancsis, hops, and other organisms with relevant data.
2-Undecanol is a secondary alcohol found in various natural sources, including essential oils and insect pheromones. It is used in the flavor and fragrance industry and as a research compound for studying insect behavior and pheromone communication. It is for research use. |
| Molecular Formula |
C11H24O
|
|---|---|
| Molecular Weight |
172.31
|
| Exact Mass |
172.183
|
| CAS # |
1653-30-1
|
| PubChem CID |
15448
|
| Appearance |
Colorless to light yellow liquid
|
| Density |
0.828 g/mL at 25 °C(lit.)
|
| Boiling Point |
130-131 °C28 mm Hg(lit.)
|
| Melting Point |
-11.00 to -9.00 °C. @ 760.00 mm Hg
|
| Flash Point |
226 °F
|
| Vapour Pressure |
0.0147mmHg at 25°C
|
| Index of Refraction |
n20/D 1.437(lit.)
|
| LogP |
3.507
|
| Hydrogen Bond Donor Count |
1
|
| Hydrogen Bond Acceptor Count |
1
|
| Rotatable Bond Count |
8
|
| Heavy Atom Count |
12
|
| Complexity |
81.1
|
| Defined Atom Stereocenter Count |
0
|
| SMILES |
CCCCCCCCCC(C)O
|
| InChi Key |
XMUJIPOFTAHSOK-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C11H24O/c1-3-4-5-6-7-8-9-10-11(2)12/h11-12H,3-10H2,1-2H3
|
| Chemical Name |
undecan-2-ol
|
| Synonyms |
Undecan-2-o; 2-Undecanol
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment, avoid exposure to moisture. |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
DMSO: 100 mg/mL (580.35 mM)
|
|---|---|
| Solubility (In Vivo) |
Solubility in Formulation 1: ≥ 2.5 mg/mL (14.51 mM) (saturation unknown) in 10% DMSO + 40% PEG300 + 5% Tween80 + 45% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 400 μL PEG300 and mix evenly; then add 50 μL Tween-80 to the above solution and mix evenly; then add 450 μL normal saline to adjust the volume to 1 mL. Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution. Solubility in Formulation 2: ≥ 2.5 mg/mL (14.51 mM) (saturation unknown) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), clear solution. For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of 20% SBE-β-CD physiological saline solution and mix evenly. Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. View More
Solubility in Formulation 3: ≥ 2.5 mg/mL (14.51 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution. |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 5.8035 mL | 29.0175 mL | 58.0349 mL | |
| 5 mM | 1.1607 mL | 5.8035 mL | 11.6070 mL | |
| 10 mM | 0.5803 mL | 2.9017 mL | 5.8035 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
