Size | Price | Stock | Qty |
---|---|---|---|
1mg |
|
||
5mg |
|
||
10mg |
|
||
50mg |
|
||
Other Sizes |
|
ln Vivo |
Rats given DMP-777 had much less parietal cell H/K-ATPase labeling. The loss of parietal cells induced by DMP-777 was greatly ameliorated by coadministration of omeprazole. When rats were treated with DMP-777, they showed a noticeable increase in amylase-resistant, PAS-positive surface mucous cells together with a pronounced foveal hyperplasia of the fundus. Compared to rats given DMP-777 alone, there was a notable decrease in BrdU-positive S-phase cells when DMP-777 and opaprazole were given together [1]. Following oral administration of 40 mg/kg of DMP-777 to monkeys, no configuration at positions "a" and "b" of DMP Inversion-777 has happened in vivo, and the starting material DMP-777 was the only stereoisomer found in the post-dose plasma sample [2]. DMP-777-treated Mist1-/-mice displayed reduced chief cell transition to SPEM. Compared to control mice, L635-treated Mist1-/-mice showed noticeably less proliferating SPEM cells [3].
|
---|---|
References |
|
Additional Infomation |
DMP-777 is a selective inhibitor of polymorphonuclear leukocyte (PMN) elastase.
|
Molecular Formula |
C31H40N4O6
|
---|---|
Molecular Weight |
564.683
|
Exact Mass |
564.295
|
CAS # |
157341-41-8
|
PubChem CID |
177992
|
Appearance |
Solid powder
|
Density |
1.227g/cm3
|
Index of Refraction |
1.581
|
LogP |
4.612
|
Hydrogen Bond Donor Count |
1
|
Hydrogen Bond Acceptor Count |
7
|
Rotatable Bond Count |
9
|
Heavy Atom Count |
41
|
Complexity |
928
|
Defined Atom Stereocenter Count |
2
|
SMILES |
CCC[C@H](C1=CC2=C(C=C1)OCO2)NC(=O)N3[C@H](C(C3=O)(CC)CC)OC4=CC=C(C=C4)C(=O)N5CCN(CC5)C
|
InChi Key |
ZSDCIRYNTCVTMF-GIGWZHCTSA-N
|
InChi Code |
InChI=1S/C31H40N4O6/c1-5-8-24(22-11-14-25-26(19-22)40-20-39-25)32-30(38)35-28(37)31(6-2,7-3)29(35)41-23-12-9-21(10-13-23)27(36)34-17-15-33(4)16-18-34/h9-14,19,24,29H,5-8,15-18,20H2,1-4H3,(H,32,38)/t24-,29+/m1/s1
|
Chemical Name |
(2S)-N-[(1R)-1-(1,3-benzodioxol-5-yl)butyl]-3,3-diethyl-2-[4-(4-methylpiperazine-1-carbonyl)phenoxy]-4-oxoazetidine-1-carboxamide
|
Synonyms |
DMP777; DMP 777; DMP-777
|
HS Tariff Code |
2934.99.9001
|
Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment (e.g. under nitrogen), avoid exposure to moisture. |
Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
Solubility (In Vitro) |
DMSO : ~38.33 mg/mL (~67.88 mM)
|
---|---|
Solubility (In Vivo) |
Solubility in Formulation 1: 35 mg/mL (61.98 mM) in 15% Cremophor EL + 85% Saline (add these co-solvents sequentially from left to right, and one by one), suspension solution; with sonication.
Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution. Solubility in Formulation 2: ≥ 2.5 mg/mL (4.43 mM) (saturation unknown) in 10% DMSO + 40% PEG300 + 5% Tween80 + 45% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution. For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 400 μL PEG300 and mix evenly; then add 50 μL Tween-80 to the above solution and mix evenly; then add 450 μL normal saline to adjust the volume to 1 mL. Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution. View More
Solubility in Formulation 3: 2.5 mg/mL (4.43 mM) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), suspension solution; with ultrasonication. Solubility in Formulation 4: ≥ 2.5 mg/mL (4.43 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution. For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL corn oil and mix evenly. Solubility in Formulation 5: ≥ 2.5 mg/mL (4.43 mM) (saturation unknown) in 5% DMSO + 40% PEG300 + 5% Tween80 + 50% Saline (add these co-solvents sequentially from left to right, and one by one), clear solution. Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH₂ O to obtain a clear solution. Solubility in Formulation 6: ≥ 2.5 mg/mL (4.43 mM) (saturation unknown) in 5% DMSO + 95% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), clear solution. Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. |
Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
1 mM | 1.7709 mL | 8.8546 mL | 17.7091 mL | |
5 mM | 0.3542 mL | 1.7709 mL | 3.5418 mL | |
10 mM | 0.1771 mL | 0.8855 mL | 1.7709 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration: mg/mL;
Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.