Cariprazine sulfate

Cat No.:V3473 Purity: ≥98%
Cariprazine (formerly known as MP-214 and RGH-188) is a novel and potent antipsychotic drug candidate that is in late-stage clinical development for the treatment of schizophrenia, as well as for bipolar disorder (manic/mixed and depressive episodes), and as an adjunctive agent for the treatment of major depressive disorder.
Cariprazine sulfate Chemical Structure Product category: Others 8
This product is for research use only, not for human use. We do not sell to patients.
Size Price
10mg
25mg
50mg
100mg
Official Supplier of:
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text
Alternate Text

 

  • Business Relationship with 5000+ Clients Globally
  • Major Universities, Research Institutions, Biotech & Pharma
  • Citations by Top Journals: Nature, Cell, Science, etc.
Top Publications Citing lnvivochem Products
Purity & Quality Control Documentation

Purity: ≥98%

Product Description

Cariprazine (formerly known as MP-214 and RGH-188) is a novel and potent antipsychotic drug candidate that is in late-stage clinical development for the treatment of schizophrenia, as well as for bipolar disorder (manic/mixed and depressive episodes), and as an adjunctive agent for the treatment of major depressive disorder. Cariprazine is a dopamine D3-preferring D3/D2 receptor partial agonist that exhibits high affinity for the D3 receptor with Ki of 0.085 nM and D2 receptor with Ki of 0.49 nM, and moderate affinity for the 5-HT1A receptor with Ki of 2.6 nM. Cariprazine stimulates inositol phosphate (IP) formation with a high potency (pEC50 8.5) with relatively low efficacy (Emax 30%).

Biological Activity I Assay Protocols (From Reference)
ln Vitro

In vitro activity: Cariprazine hydrochloride is a novel and potent antipsychotic drug candidate that is in late-stage clinical development for the treatment of schizophrenia, as well as for bipolar disorder (manic/mixed and depressive episodes), and as an adjunctive agent for the treatment of major depressive disorder. Cariprazine is a dopamine D3-preferring D3/D2 receptor partial agonist that exhibits high affinity for the D3 receptor with Ki of 0.085 nM and D2 receptor with Ki of 0.49 nM, and moderate affinity for the 5-HT1A receptor with Ki of 2.6 nM. Cariprazine stimulates inositol phosphate (IP) formation with a high potency (pEC50 8.5) with relatively low efficacy (Emax 30%). Cariprazine stimulates inositol phosphate (IP) formation with a high potency (pEC50 8.5) with relatively low efficacy (Emax 30%.Cariprazine, a novel candidate antipsychotic, demonstrated approximately 10-fold higher affinity for human D3 versus human D2L and human D2S receptors (pKi 10.07, 9.16, and 9.31, respectively). Cariprazine displays high affinity at human serotonin (5-HT) type 2B receptors (pKi 9.24) with pure antagonism. Cariprazine has lower affinity at human and rat hippocampal 5-HT1A receptors (pKi 8.59 and 8.34, respectively) and demonstrates low intrinsic efficacy. Cariprazine displays low affinity at human 5-HT2A receptors (pKi 7.73). Moderate or low affinity for histamine H1 and 5-HT2C receptors (pKi 7.63 and 6.87, respectively) suggest Cariprazine''s reduced propensity for adverse events related to these receptors.Cariprazine is over sixfold more potent (EC50=1.4 nM) than Aripiprazole (EC50=9.2 nM) in inhibiting isoproterenol-induced cAMP production in HEK-293 cells


Kinase Assay: These assays are done in 50 mM Tris (pH 7.4), 100 mM NaCl, 7 mM MgCl2, 1 mM EDTA, and 1 mM DTT. Assay tubes (final volume 250 μL) contain 50 μM (striatum and hippocampus) or 1 μM (D2 and D3 cell membrane) GDP, the ligand to be examined, and membrane suspension (250 μg tissue/tube for the striatum and hippocampus and 20 μg protein/tube for hD2 and hD3 membranes). Samples are preincubated for 10 min at 30°C. After the addition of 50 pM [35S]GTPγS, membranes are incubated for an additional 60 min at 30°C. Nonspecific binding is determined in the presence of 10 μM GTPγS; basal binding is determined in the presence of buffer only. The assay is terminated by rapid filtration through UniFilter GF/B using a harvester, and the membranes washed four times with 1 mL of ice-cold buffer. After drying (40°C for 1 h), 40 μL of Microscint is added to the filters, and the bound radioactivity is determined by a TopCount NXT counter


Cell Assay: Cells are seeded on a 24-well tissue culture plate in 500 μL of medium. Fifty microliters of medium containing 0.55 μCi myo-[3H]inositol is added (final concentration 1 μCi/mL) and incubated for 18-20 h. Cells are then washed three times with buffer containing 140 mM NaCl, 5 mM KCl, 2 mM CaCl2, 5 mM HEPES, 5 mM Na-HEPES, 20 mM glucose, and 10 mM LiCl (pH 7.4). Cells are then incubated for an additional 60 min (37°C) in medium with test compounds alone (agonist test) or alongside 1000 nM (±)-Quinpirole (antagonist test). Medium is then aspirated off, cells are lysed by adding 400 μL of 0.1 M HCl/2 mM CaCl2, and supernatants are frozen at −72°C. After thawing and centrifugation at 1000g for 10 min, 200 μL of each supernatant is loaded on 250 μL of AG1-X8 (formate form) anion exchange column. Effluent is discarded, and columns are washed twice in 1.5 mL of distilled water. IPs are eluted with 2.5 mL of 1 M ammonium formate/0.1 M formic acid directly into scintillation vials, 10 mL of Optiphase HiSafe 3 is added, and the radioactivity is determined in a TriCarb 4900 scintillation counter.

ln Vivo
A significant (P<0.01) reduction in ouabain-induced hyperactivity is observed after acute i.p. administration of all doses of Cariprazine (mean±SEM: 0.06 mg/kg, 64.2±3.88; 0.25 mg/kg, 72.7±11.67; 0.5 mg/kg, 40.6±5.32; 1 mg/kg, 19.5±8.78) and lithium (40.4±12.78), compared with ouabain injection alone (114.6±14.33). The highest Cariprazine dose produced significant sedation (72% inhibition for Cariprazine 1.0 mg/kg aCSF vs. saline aCSF; P<0.05).The effects of 5 doses of Cariprazine (ranging from 0.005 to 0.15 mg/kg) are examined on EPM behavior of wild-type mice. Whereas lower doses of Cariprazine (0.005 to 0.02 mg/kg) do not alter the time spent in open arms, the two higher doses (0.08 and 0.15 mg/kg) lead to a significant decline of this measure (ANOVA, (F(5,52)=4.20; p=0.0032)). Moreover, the two higher doses of Cariprazine also lead to a significant decrease in the total number of arm entries (F(5,52)=7.21; p=0.0001)) but this decrease in the total number of arm entries is largely accounted for by a significant decrease in the number of closed arm entries (F(5,52)=11.75; p=0.0001)). The two highest doses of Cariprazine (0.08 and 0.15 mg/kg) have significant effects on locomotor activity, but doses ranging from 0.005 to 0.02 mg/kg do not affect anxiety-like behavior or locomotor activity in the EPM test.
Animal Protocol
Dissolved in saline, filter sterilized (Mice) with a dose of 0.005 to 0.15 mg/kg; dissolved in 0.9% saline (Rats) with dosed of 0.06, 0.25, 0.5, and 1.0 mg/kg via intraperitoneal (i.p.) injection
Wild-type C57Bl/6J mice
References
2010 Apr;333(1):328-40.
These protocols are for reference only. InvivoChem does not independently validate these methods.
Physicochemical Properties
Storage

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Shipping Condition
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
Solubility Data
Solubility (In Vivo)
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

Injection Formulations
(e.g. IP/IV/IM/SC)
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution 50 μL Tween 80 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO 400 μLPEG300 50 μL Tween 80 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).
View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C,1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO 100 μLPEG300 200 μL castor oil 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10: 10 : 80 (i.e. 100 μL Ethanol 100 μL Cremophor 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH 400 μLPEG300 50 μL Tween 80 450 μL Saline)


Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).
View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders


Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

 (Please use freshly prepared in vivo formulations for optimal results.)
Calculator

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

  • Calculate the Mass of a compound required to prepare a solution of known volume and concentration
  • Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
  • Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume
An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?
  • Enter 350.26 in the Molecular Weight (MW) box
  • Enter 10 in the Concentration box and choose the correct unit (mM)
  • Enter 5 in the Volume box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:
  • Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
  • Enter 25 into the Concentration (End) box and select the correct unit (mM)
  • Enter 25 into the Volume (End) box and choose the correct unit (mL)
  • Click the “Calculate” button
  • The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box
g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4  c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:
  • To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.
Definitions of molecular mass, molecular weight, molar mass and molar weight:
  • Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
  • Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.
/

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

  • Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
  • Click the “Calculate” button
  • The answer appears in the Volume (to add to vial) box
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)
Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)
+
+
+

Calculation results

Working concentration mg/mL;

Method for preparing DMSO stock solution mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.

(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
             (2) Be sure to add the solvent(s) in order.

Contact Us Back to top